[PATCH v9 12/15] drm/exynos: exynos_dp: Apply analogix_dp_finish_probe()

[Damon Ding <damon.ding@rock-chips.com>]

Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Exynos side to the Analogix side.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)

---

Changes in v4:
- Rename analogix_dp_find_panel_or_bridge() to
  analogix_dp_finish_probe().

Changes in v7:
- Remove exynos_dp_legacy_bridge_init() and inline API
  devm_drm_of_display_mode_bridge().
- If the panel or the next_bridge is parsed from DT, use ptr validity
  to check whether to call component_add() directly at the end of
  probing.

-Changes in v9:
- Add Tested-by tag.
---
 drivers/gpu/drm/exynos/exynos_dp.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 478eaa6f3175..6126820aad3b 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -157,9 +157,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np;
 	struct exynos_dp_device *dp;
-	struct drm_panel *panel;
-	struct drm_bridge *bridge;
-	int ret;
 
 	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
 			  GFP_KERNEL);
@@ -186,30 +183,30 @@ static int exynos_dp_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
-	if (ret == -ENODEV) {
+	if (of_get_display_timings(dev->of_node)) {
 		dp->plat_data.next_bridge = devm_drm_of_display_mode_bridge(dp->dev,
 									dp->dev->of_node,
 									DRM_MODE_CONNECTOR_eDP);
-		ret = IS_ERR(dp->plat_data.next_bridge) ? PTR_ERR(dp->plat_data.next_bridge) : 0;
+		if (IS_ERR(dp->plat_data.next_bridge))
+			return PTR_ERR(dp->plat_data.next_bridge);
 	}
-	if (ret)
-		return ret;
 
 	/* The remote port can be either a panel or a bridge */
-	dp->plat_data.panel = panel;
-	dp->plat_data.next_bridge = bridge;
 	dp->plat_data.dev_type = EXYNOS_DP;
 	dp->plat_data.power_on = exynos_dp_poweron;
 	dp->plat_data.power_off = exynos_dp_poweroff;
 	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.ops = &exynos_dp_ops;
 
 out:
 	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
 	if (IS_ERR(dp->adp))
 		return PTR_ERR(dp->adp);
 
-	return component_add(&pdev->dev, &exynos_dp_ops);
+	if (dp->plat_data.panel || dp->plat_data.next_bridge)
+		return component_add(&pdev->dev, &exynos_dp_ops);
+	else
+		return analogix_dp_finish_probe(dp->adp);
 }
 
 static void exynos_dp_remove(struct platform_device *pdev)
-- 
2.34.1