From: Svyatoslav Ryhel <clamor95@gmail.com>
To: David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/2] ARM: tegra: transformers: add connector node
Date: Tue, 10 Feb 2026 11:49:08 +0200 [thread overview]
Message-ID: <20260210094908.14276-3-clamor95@gmail.com> (raw)
In-Reply-To: <20260210094908.14276-1-clamor95@gmail.com>
All ASUS Transformers have micro-HDMI connector directly available. After
Tegra HDMI got bridge/connector support, we should use connector framework
for proper HW description.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../tegra20-asus-transformer-common.dtsi | 22 ++++++++++++++++---
.../boot/dts/nvidia/tegra30-asus-tf600t.dts | 21 ++++++++++++++++--
.../tegra30-asus-transformer-common.dtsi | 21 ++++++++++++++++--
3 files changed, 57 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
index 73c7ee378865..51d99998d836 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -79,9 +79,11 @@ hdmi@54280000 {
pll-supply = <&hdmi_pll_reg>;
hdmi-supply = <&vdd_hdmi_en>;
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&connector_in>;
+ };
+ };
};
};
@@ -951,6 +953,20 @@ clk32k_in: clock-32k-in {
#clock-cells = <0>;
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ ddc-i2c-bus = <&hdmi_ddc>;
+
+ port {
+ connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
cpus {
cpu0: cpu@0 {
cpu-supply = <&vdd_cpu>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
index 1ed0536ae3fa..498780a96cf9 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -67,8 +67,11 @@ hdmi: hdmi@54280000 {
pll-supply = <&vdd_1v8_vio>;
vdd-supply = <&vdd_3v3_sys>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&connector_in>;
+ };
+ };
};
lcd: dsi@54300000 {
@@ -2302,6 +2305,20 @@ clk32k_in: clock-32k {
clock-output-names = "pmic-oscillator";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ ddc-i2c-bus = <&hdmi_ddc>;
+
+ port {
+ connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
cpus {
cpu0: cpu@0 {
cpu-supply = <&vdd_cpu>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
index 53382e10f29f..0b0713d62e32 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
@@ -166,8 +166,11 @@ hdmi: hdmi@54280000 {
pll-supply = <&vdd_1v8_vio>;
vdd-supply = <&vdd_3v3_sys>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&connector_in>;
+ };
+ };
};
};
@@ -1713,6 +1716,20 @@ clk32k_in: clock-32k {
clock-output-names = "pmic-oscillator";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ ddc-i2c-bus = <&hdmi_ddc>;
+
+ port {
+ connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+ };
+
cpus {
cpu0: cpu@0 {
cpu-supply = <&vdd_cpu>;
--
2.51.0
next prev parent reply other threads:[~2026-02-10 9:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-10 9:49 [PATCH v1 0/2] ARM: tegra: document Tegra20 HDMI port Svyatoslav Ryhel
2026-02-10 9:49 ` [PATCH v1 1/2] dt-bindings: display: " Svyatoslav Ryhel
2026-02-10 13:35 ` Rob Herring (Arm)
2026-02-10 14:19 ` Rob Herring
2026-02-10 14:28 ` Svyatoslav Ryhel
2026-02-11 6:27 ` Claude review: " Claude Code Review Bot
2026-02-10 9:49 ` Svyatoslav Ryhel [this message]
2026-02-11 6:27 ` Claude review: ARM: tegra: transformers: add connector node Claude Code Review Bot
2026-02-11 6:27 ` Claude review: ARM: tegra: document Tegra20 HDMI port Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260210094908.14276-3-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox