[PATCH v5 3/7] clk: bcm: rpi: Mark PIXEL_CLK and HEVC_CLK as CLK_IGNORE_UNUSED

[Maíra Canal <mcanal@igalia.com>]

If PIXEL_CLK or HEVC_CLK is disabled during boot, the firmware will skip
HSM initialization, which would result in a bus lockup. However, those
clocks are consumed by drivers (vc4 and HEVC decoder drivers,
respectively), which means that they can be enabled/disabled by the
drivers.

Mark those clocks as CLK_IGNORE_UNUSED to allow them to be disabled by
drivers when appropriate.

Acked-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
---
 drivers/clk/bcm/clk-raspberrypi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 2e63121af0900ac9b4874b666cf6d02baa8be11c..b9f2a4dc1510ff162c84d67aa0ddd7f435156398 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -139,12 +139,12 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = {
 	[RPI_FIRMWARE_PIXEL_CLK_ID] = {
 		.export = true,
 		.minimize = true,
-		.flags = CLK_IS_CRITICAL,
+		.flags = CLK_IGNORE_UNUSED,
 	},
 	[RPI_FIRMWARE_HEVC_CLK_ID] = {
 		.export = true,
 		.minimize = true,
-		.flags = CLK_IS_CRITICAL,
+		.flags = CLK_IGNORE_UNUSED,
 	},
 	[RPI_FIRMWARE_ISP_CLK_ID] = {
 		.export = true,

-- 
2.52.0