[PATCH 2/3] dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge

[Hermes Wu via B4 Relay <devnull+Hermes.wu.ite.com.tw@kernel.org>]

From: Hermes Wu <Hermes.wu@ite.com.tw>

Add device tree binding documentation for the ITE IT6162 MIPI DSI to
HDMI 2.0 bridge chip. The IT6162 is an I2C-controlled bridge that
supports the following configurations:

  - Single MIPI DSI input: up to 4K @ 30Hz
  - Dual MIPI DSI input (combined): up to 4K @ 60Hz

The chip also supports up to 8-channel audio output via 4 I2S data
channels.

Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
---
 .../bindings/display/bridge/ite,it6162.yaml        | 156 +++++++++++++++++++++
 1 file changed, 156 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..31f809a83c305447a152e14b20cb39ef1f816911
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6162.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6162 MIPI DSI to HDMI2.0 Bridge
+
+maintainers:
+  - Hermes Wu <Hermes.Wu@ite.com.tw>
+
+description: |
+  The ITE IT6162 is a high-performance, low-power HDMI bridge that converts
+  2 MIPI DSI signal to 1 HDMI2.0. It supports 2 MIPI D-PHY 2.0 up to 10Gbps
+  each DSI port (20Gbps total), compatible with DSI-2 v2.0.
+
+  The HDMI transmitter side supports up to 4Kx2K@60Hz resolutions, and is
+  compliant with HDMI2.0.
+
+  For audio, the IT61620 supports up to 8-channel LPCM via I2S (multi-line or
+  TDM mode), with optional S/PDIF or DSD (for SACD). It supports audio
+  sampling rates up to 192kHz.
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    const: ite,it6162
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  ivdd-supply:
+    description: core voltage
+
+  ovdd-supply:
+    description: I/O voltage
+
+  ovdd1833-supply:
+    description: flexible I/O voltage
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port for MIPI DSI-0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port for MIPI DSI-1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Audio input port (I2S)
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port for HDMI output
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@58 {
+            compatible = "ite,it6162";
+            reg = <0x58>;
+            #sound-dai-cells = <0>;
+            interrupt-parent = <&pio>;
+            interrupts = <128 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&it6162_pins>;
+            reset-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
+            ivdd-supply = <&pp1000_hdmi_x>;
+            ovdd-supply = <&pp3300_vio28_x>;
+            ovdd1833-supply = <&pp1800_vcamio_x>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6162_dsi0: endpoint {
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&dsi_0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6162_dsi1: endpoint {
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&dsi_1_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    it6162_audio_in: endpoint {
+                        remote-endpoint = <&i2s0_out>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+                    it6162_hdmi_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+            };
+        };
+    };

-- 
2.34.1