[PATCH v5 1/2] dt-bindings: bridge: lt8713sx: Add bindings

[Vishnu Saini <vishnu.saini@oss.qualcomm.com>]

Add bindings for lt8713sx.

Co-developed-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Prahlad Valluru <vvalluru@qti.qualcomm.com>
Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Simon Zhu <xmzhu@lontium.corp-partner.google.com>
---
 .../bindings/display/bridge/lontium,lt8713sx.yaml  | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
new file mode 100644
index 000000000000..a5ba4db11a7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
+
+maintainers:
+  - Vishnu Saini <vishnu.saini@oss.qualcomm.com>
+
+description:
+  The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
+  that integrates one DP input and up to three configurable output interfaces
+  (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8713sx
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator for 3.3V vcc.
+
+  vdd-supply:
+    description: Regulator for 1.1V vdd.
+
+  reset-gpios:
+    description: GPIO connected to active low RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP input from soc to bridge chip
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP output from bridge
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional DP port for DP output from bridge
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional DP port for DP output from bridge
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        bridge@4f {
+            compatible = "lontium,lt8713sx";
+            reg = <0x4f>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    lt8713sx_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lt8713sx_dp0_out: endpoint {
+                        remote-endpoint = <&dp0_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lt8713sx_dp1_out: endpoint {
+                        remote-endpoint = <&dp1_connector_in>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+                    lt8713sx_dp2_out: endpoint {
+                        remote-endpoint = <&dp2_connector_in>;
+                    };
+                };
+            };
+        };
+    };

-- 
2.34.1