[PATCH v1 1/3] drm/doc: Update documentation for 'none' recovery method

[Raag Jadav <raag.jadav@intel.com>]

Expand 'none' recovery method for wedged event to include debug cases
where driver wants to hint "no recovery" without resetting the device
from driver context.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
---
 Documentation/gpu/drm-uapi.rst | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
index d98428a592f1..af20136108b7 100644
--- a/Documentation/gpu/drm-uapi.rst
+++ b/Documentation/gpu/drm-uapi.rst
@@ -439,13 +439,11 @@ following expectations.
     =============== ========================================
 
 The only exception to this is ``WEDGED=none``, which signifies that the device
-was temporarily 'wedged' at some point but was recovered from driver context
-using device specific methods like reset. No explicit recovery is expected from
-the consumer in this case, but it can still take additional steps like gathering
-telemetry information (devcoredump, syslog). This is useful because the first
-hang is usually the most critical one which can result in consequential hangs or
-complete wedging.
-
+was temporarily 'wedged' at some point but no explicit recovery is expected
+from the consumer in this case. The consumer can still try to gather telemetry
+information (devcoredump, syslog) for debug purpose in order to root cause the
+hang. This is useful because the first hang is usually the most critical one
+which can result in consequential hangs or complete wedging.
 
 Vendor Specific Recovery
 ------------------------
-- 
2.43.0