From: Pengyu Luo <mitltlatltl@gmail.com>
To: Rob Clark <robin.clark@oss.qualcomm.com>,
Dmitry Baryshkov <lumag@kernel.org>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Jessica Zhang <jesszhan0024@gmail.com>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>
Cc: Pengyu Luo <mitltlatltl@gmail.com>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH] drm/msm/dsi: fix pclk rate calculation for bonded dsi
Date: Sat, 7 Mar 2026 00:32:38 +0800 [thread overview]
Message-ID: <20260306163255.215456-1-mitltlatltl@gmail.com> (raw)
Recently, we round up new_hdisplay once at most, for bonded dsi, we
may need twice, since they are independent links, we should round up
each half separately. This also aligns with the hdisplay we program
later in dsi_timing_setup()
Example:
full_hdisplay = 1904, dsc_bpp = 8, bpc = 8
new_full_hdisplay = DIV_ROUND_UP(1904 * 8, 8 * 3) = 635
if we use half display
new_half_hdisplay = DIV_ROUND_UP(952 * 8, 8 * 3) = 318
new_full_display = 636
Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index e8e83ee61..db6da9937 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -584,13 +584,30 @@ void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
* FIXME: Reconsider this if/when CMD mode handling is rewritten to use
* transfer time and data overhead as a starting point of the calculations.
*/
-static unsigned long dsi_adjust_pclk_for_compression(const struct drm_display_mode *mode,
- const struct drm_dsc_config *dsc)
+static unsigned long
+dsi_adjust_pclk_for_compression(const struct drm_display_mode *mode,
+ const struct drm_dsc_config *dsc,
+ bool is_bonded_dsi)
{
- int new_hdisplay = DIV_ROUND_UP(mode->hdisplay * drm_dsc_get_bpp_int(dsc),
- dsc->bits_per_component * 3);
+ int hdisplay, new_hdisplay, new_htotal;
- int new_htotal = mode->htotal - mode->hdisplay + new_hdisplay;
+ /*
+ * For bonded DSI, split hdisplay across two links and round up each
+ * half separately, passing the full hdisplay would only round up once.
+ * This also aligns with the hdisplay we program later in
+ * dsi_timing_setup()
+ */
+ hdisplay = mode->hdisplay;
+ if (is_bonded_dsi)
+ hdisplay /= 2;
+
+ new_hdisplay = DIV_ROUND_UP(hdisplay * drm_dsc_get_bpp_int(dsc),
+ dsc->bits_per_component * 3);
+
+ if (is_bonded_dsi)
+ new_hdisplay *= 2;
+
+ new_htotal = mode->htotal - mode->hdisplay + new_hdisplay;
return mult_frac(mode->clock * 1000u, new_htotal, mode->htotal);
}
@@ -603,7 +620,7 @@ static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode,
pclk_rate = mode->clock * 1000u;
if (dsc)
- pclk_rate = dsi_adjust_pclk_for_compression(mode, dsc);
+ pclk_rate = dsi_adjust_pclk_for_compression(mode, dsc, is_bonded_dsi);
/*
* For bonded DSI mode, the current DRM mode has the complete width of the
--
2.53.0
next reply other threads:[~2026-03-06 16:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-06 16:32 Pengyu Luo [this message]
2026-03-06 16:50 ` [PATCH] drm/msm/dsi: fix pclk rate calculation for bonded dsi Dmitry Baryshkov
2026-03-07 19:57 ` kernel test robot
2026-03-08 22:39 ` Claude review: " Claude Code Review Bot
2026-03-08 22:39 ` Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260306163255.215456-1-mitltlatltl@gmail.com \
--to=mitltlatltl@gmail.com \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lumag@kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox