[PATCH V4 0/5] Enable ADSP and CDSP for Glymur SoC

[Sibi Sankar <sibi.sankar@oss.qualcomm.com>]

Qualcomm Glymur SoC variants predominantly boot Linux at EL2. This means
that the firmware streams of the remote processors are managed in kernel
and not in Gunyah hypervisor. Given that the Peripheral Image Loader for
Qualcomm SoCs now support running Linux Host at EL2 [1], this series
documents and enables ADSP and CDSP on Qualcomm Glymur SoCs with its
fastrpc nodes. A few variants of the SoC are expected to run Linux at EL1
hence the iommus properties are left optional.

[1] - https://lore.kernel.org/all/20260105-kvmrprocv10-v10-0-022e96815380@oss.qualcomm.com/

Changes in v4:
- Fix SID used in ADSP/CDSP for correctness [Konrad]
-Link to v3: https://lore.kernel.org/lkml/20260129001358.770053-1-sibi.sankar@oss.qualcomm.com/

Changes in v3:
- A few variants of the SoC are expected to run Linux at EL1 hence the
  iommus properties are left optional.
- Add fastrpc bindings and nodes.
- Link to v2: https://lore.kernel.org/all/20251029-knp-remoteproc-v2-0-6c81993b52ea@oss.qualcomm.com/

Changes in v2:
- Combined into Kaanapali series since they are fully compatible.
- Link to v1: https://lore.kernel.org/all/20250924183726.509202-1-sibi.sankar@oss.qualcomm.com/

Sibi Sankar (5):
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur ADSP
  dt-bindings: remoteproc: qcom,sm8550-pas: Add Glymur CDSP
  dt-bindings: misc: qcom,fastrpc: Add compatible for Glymur
  arm64: dts: qcom: glymur: Add ADSP and CDSP for Glymur SoC
  arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP

 .../bindings/misc/qcom,fastrpc.yaml           |  11 +-
 .../bindings/remoteproc/qcom,sm8550-pas.yaml  |   4 +
 arch/arm64/boot/dts/qcom/glymur-crd.dts       |  14 +
 arch/arm64/boot/dts/qcom/glymur.dtsi          | 286 ++++++++++++++++++
 4 files changed, 312 insertions(+), 3 deletions(-)


base-commit: a0ae2a256046c0c5d3778d1a194ff2e171f16e5f
-- 
2.34.1