[PATCH V5 5/5] arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP

[Sibi Sankar <sibi.sankar@oss.qualcomm.com>]

Enable ADSP and CDSP on Glymur CRD board.

Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 877945319012..6b7f91a3a968 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -485,6 +485,20 @@ &pon_resin {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/glymur/adsp.mbn",
+			"qcom/glymur/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/glymur/cdsp.mbn",
+			"qcom/glymur/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
 			       <10 2>, /* OOB UART */
-- 
2.34.1