From: Jim Cromie <jim.cromie@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Jason Baron <jbaron@akamai.com>,
Jim Cromie <jim.cromie@gmail.com>,
linux-kernel@vger.kernel.org
Cc: mripard@kernel.org, tzimmermann@suse.de,
maarten.lankhorst@linux.intel.com, jani.nikula@intel.com,
ville.syrjala@linux.intel.com, christian.koenig@amd.com,
matthew.auld@intel.com, arunpravin.paneerselvam@amd.com,
louis.chauvet@bootlin.com, skhan@linuxfoundation.org,
pmladek@suse.com, ukaszb@chromium.org,
dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
amd-gfx@lists.freedesktop.org
Subject: [PATCH v11 02/65] dyndbg: factor ddebug_match_desc out from ddebug_change
Date: Fri, 13 Mar 2026 07:09:09 -0600 [thread overview]
Message-ID: <20260313131045.2526422-3-jim.cromie@gmail.com> (raw)
In-Reply-To: <20260313131045.2526422-1-jim.cromie@gmail.com>
ddebug_change() is a big (~100 lines) function with a nested for loop.
The outer loop walks the per-module ddebug_tables list, and does
module stuff: it filters on a query's "module FOO*" and "class BAR",
failures here skip the entire inner loop.
The inner loop (60 lines) scans a module's descriptors. It starts
with a long block of filters on function, line, format, and the
validated "BAR" class (or the legacy/_DPRINTK_CLASS_DFLT).
These filters "continue" past pr_debugs that don't match the query
criteria, before it falls through the code below that counts matches,
then adjusts the flags and static-keys. This is unnecessarily hard to
think about.
So move the per-descriptor filter-block into a boolean function:
ddebug_match_desc(desc), and change each "continue" to "return false".
This puts a clear interface in place, so any future changes are either
inside, outside, or across this interface.
also fix checkpatch complaints about spaces and braces.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 83 +++++++++++++++++++++++++--------------------
1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 18a71a9108d3..6b1e983cfedc 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -172,6 +172,52 @@ static struct ddebug_class_map *ddebug_find_valid_class(struct ddebug_table cons
* callsites, normally the same as number of changes. If verbose,
* logs the changes. Takes ddebug_lock.
*/
+static bool ddebug_match_desc(const struct ddebug_query *query,
+ struct _ddebug *dp,
+ int valid_class)
+{
+ /* match site against query-class */
+ if (dp->class_id != valid_class)
+ return false;
+
+ /* match against the source filename */
+ if (query->filename &&
+ !match_wildcard(query->filename, dp->filename) &&
+ !match_wildcard(query->filename,
+ kbasename(dp->filename)) &&
+ !match_wildcard(query->filename,
+ trim_prefix(dp->filename)))
+ return false;
+
+ /* match against the function */
+ if (query->function &&
+ !match_wildcard(query->function, dp->function))
+ return false;
+
+ /* match against the format */
+ if (query->format) {
+ if (*query->format == '^') {
+ char *p;
+ /* anchored search. match must be at beginning */
+ p = strstr(dp->format, query->format + 1);
+ if (p != dp->format)
+ return false;
+ } else if (!strstr(dp->format, query->format)) {
+ return false;
+ }
+ }
+
+ /* match against the line number range */
+ if (query->first_lineno &&
+ dp->lineno < query->first_lineno)
+ return false;
+ if (query->last_lineno &&
+ dp->lineno > query->last_lineno)
+ return false;
+
+ return true;
+}
+
static int ddebug_change(const struct ddebug_query *query,
struct flag_settings *modifiers)
{
@@ -204,42 +250,7 @@ static int ddebug_change(const struct ddebug_query *query,
for (i = 0; i < dt->num_ddebugs; i++) {
struct _ddebug *dp = &dt->ddebugs[i];
- /* match site against query-class */
- if (dp->class_id != valid_class)
- continue;
-
- /* match against the source filename */
- if (query->filename &&
- !match_wildcard(query->filename, dp->filename) &&
- !match_wildcard(query->filename,
- kbasename(dp->filename)) &&
- !match_wildcard(query->filename,
- trim_prefix(dp->filename)))
- continue;
-
- /* match against the function */
- if (query->function &&
- !match_wildcard(query->function, dp->function))
- continue;
-
- /* match against the format */
- if (query->format) {
- if (*query->format == '^') {
- char *p;
- /* anchored search. match must be at beginning */
- p = strstr(dp->format, query->format+1);
- if (p != dp->format)
- continue;
- } else if (!strstr(dp->format, query->format))
- continue;
- }
-
- /* match against the line number range */
- if (query->first_lineno &&
- dp->lineno < query->first_lineno)
- continue;
- if (query->last_lineno &&
- dp->lineno > query->last_lineno)
+ if (!ddebug_match_desc(query, dp, valid_class))
continue;
nfound++;
--
2.53.0
next prev parent reply other threads:[~2026-03-13 13:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-13 13:09 [PATCH v11 00/65] Fix DRM_USE_DYNAMIC_DEBUG=y Jim Cromie
2026-03-13 13:09 ` [PATCH v11 01/65] dyndbg: fix NULL ptr on i386 due to section alignment Jim Cromie
2026-03-13 21:02 ` Claude review: " Claude Code Review Bot
2026-03-13 13:09 ` Jim Cromie [this message]
2026-03-13 21:02 ` Claude review: dyndbg: factor ddebug_match_desc out from ddebug_change Claude Code Review Bot
2026-03-13 21:02 ` Claude review: Fix DRM_USE_DYNAMIC_DEBUG=y Claude Code Review Bot
-- strict thread matches above, loose matches on Subject: below --
2026-03-13 13:19 [PATCH v11 00/65] " Jim Cromie
2026-03-13 13:19 ` [PATCH v11 02/65] dyndbg: factor ddebug_match_desc out from ddebug_change Jim Cromie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260313131045.2526422-3-jim.cromie@gmail.com \
--to=jim.cromie@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=amd-gfx@lists.freedesktop.org \
--cc=arunpravin.paneerselvam@amd.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=jbaron@akamai.com \
--cc=linux-kernel@vger.kernel.org \
--cc=louis.chauvet@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=matthew.auld@intel.com \
--cc=mripard@kernel.org \
--cc=pmladek@suse.com \
--cc=skhan@linuxfoundation.org \
--cc=tzimmermann@suse.de \
--cc=ukaszb@chromium.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox