[PATCH 2/2] drm/bridge: display-connector: trigger initial HPD event for DP

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

If the DisplayPort drivers use display-connector for the HPD detection,
the internal HPD state machine might be not active and thus the hardware
might be not able to handle cable detection correctly. Instead it will
depend on the externall HPD notifications to set the cable state,
bypassing the internal HPD state machine (for example this is the case
for the msm DP driver).

However if the cable has been plugged before the HPD IRQ has been
enabled, there will be no HPD event coming. The drivers might fail
detection in such a case. Trigger the HPD notification after enabling
the HPD IRQ, propagating the cable insertion state.

Fixes: 2e2bf3a5584d ("drm/bridge: display-connector: add DP support")
Reported-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/bridge/display-connector.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index 6bb1134f75c3..f7a5bfd9c075 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
@@ -25,6 +26,8 @@ struct display_connector {
 
 	struct regulator	*supply;
 	struct gpio_desc	*ddc_en;
+
+	struct work_struct	hpd_work;
 };
 
 static inline struct display_connector *
@@ -92,15 +95,29 @@ static void display_connector_hpd_enable(struct drm_bridge *bridge)
 	struct display_connector *conn = to_display_connector(bridge);
 
 	enable_irq(conn->hpd_irq);
+
+	if (conn->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		schedule_work(&conn->hpd_work);
 }
 
 static void display_connector_hpd_disable(struct drm_bridge *bridge)
 {
 	struct display_connector *conn = to_display_connector(bridge);
 
+	if (conn->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		cancel_work_sync(&conn->hpd_work);
+
 	disable_irq(conn->hpd_irq);
 }
 
+static void display_connector_hpd_work(struct work_struct *work)
+{
+	struct display_connector *conn = container_of(work, struct display_connector, hpd_work);
+	struct drm_bridge *bridge = &conn->bridge;
+
+	drm_bridge_hpd_notify(bridge, display_connector_detect(bridge));
+}
+
 static const struct drm_edid *display_connector_edid_read(struct drm_bridge *bridge,
 							  struct drm_connector *connector)
 {
@@ -395,6 +412,8 @@ static int display_connector_probe(struct platform_device *pdev)
 		conn->bridge.ops |= DRM_BRIDGE_OP_DETECT;
 	if (conn->hpd_irq >= 0)
 		conn->bridge.ops |= DRM_BRIDGE_OP_HPD;
+	if (conn->hpd_irq >= 0 && type == DRM_MODE_CONNECTOR_DisplayPort)
+		INIT_WORK(&conn->hpd_work, display_connector_hpd_work);
 
 	dev_dbg(&pdev->dev,
 		"Found %s display connector '%s' %s DDC bus and %s HPD GPIO (ops 0x%x)\n",

-- 
2.47.3