[PATCH v2 0/4] Improvements on RZ/G2L MIPI DSI driver

[Biju <biju.das.au@gmail.com>]

From: Biju Das <biju.das.jz@bp.renesas.com>

Hi All,

Enhance the RZ/G2L MIPI DSI driver based on section "34.4.2.1 Reset" of
the RZ/G2L hardware manual Rev.1.50 May 2025. According to this section,
it is required to wait >= 1 msec after deasserting the CMN_RSTB signal,
and writing to DSI PHY timing registers and LINK registers should be done
before deasserting CMN_RSTB.
Additionally, the hardware manual suggests display timing settings should
be done after the HS clock is started.

v1->v2:
 * Updated commit header and description
 * Moved the code from rzg2l_mipi_dsi_dphy_init() to rzg2l_mipi_dsi_startup()
 * Moved the check before calling reset_control_deassert(), so that it will be
   skipped for RZ/V2H SoC
 * Added fixes patch for moving rzg2l_mipi_dsi_set_display_timing()
 * Added fixes patch for assert of CMN_RSTB signal

Biju Das (4):
  drm: renesas: rzg2l_mipi_dsi: Move rzg2l_mipi_dsi_set_display_timing()
  drm: renesas: rzg2l_mipi_dsi: Fix assert of CMN_RSTB signal
  drm: renesas: rzg2l_mipi_dsi: Fix deassert of CMN_RSTB signal
  drm: renesas: rzg2l_mipi_dsi: Increase reset delay

 .../gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c    | 34 +++++++++++--------
 1 file changed, 19 insertions(+), 15 deletions(-)

-- 
2.43.0