[PATCH v2 1/4] drm: renesas: rzg2l_mipi_dsi: Move rzg2l_mipi_dsi_set_display_timing()

[Biju <biju.das.au@gmail.com>]

From: Biju Das <biju.das.jz@bp.renesas.com>

The RZ/G2L hardware manual (Rev. 1.50, May 2025), Section 34.4.2.4
Video-Input Operation, requires display timings to be set after the
HS clock is started. Move rzg2l_mipi_dsi_set_display_timing() from
rzg2l_mipi_dsi_atomic_pre_enable() to rzg2l_mipi_dsi_atomic_enable(),
placing it after rzg2l_mipi_dsi_start_hs_clock(). Drop the unused ret
variable from rzg2l_mipi_dsi_atomic_pre_enable().

Fixes: 5ce16c169a4c ("drm: renesas: rz-du: Add atomic_pre_enable")
Fixes: 7a043f978ed1 ("drm: rcar-du: Add RZ/G2L DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v2:
 * New patch
---
 drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
index a87a301326c7..ff95cb9a7de5 100644
--- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
+++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
@@ -1025,29 +1025,33 @@ static void rzg2l_mipi_dsi_atomic_pre_enable(struct drm_bridge *bridge,
 	const struct drm_display_mode *mode;
 	struct drm_connector *connector;
 	struct drm_crtc *crtc;
-	int ret;
 
 	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
 	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
 	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
 
-	ret = rzg2l_mipi_dsi_startup(dsi, mode);
-	if (ret < 0)
-		return;
-
-	rzg2l_mipi_dsi_set_display_timing(dsi, mode);
+	rzg2l_mipi_dsi_startup(dsi, mode);
 }
 
 static void rzg2l_mipi_dsi_atomic_enable(struct drm_bridge *bridge,
 					 struct drm_atomic_state *state)
 {
 	struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
+	const struct drm_display_mode *mode;
+	struct drm_connector *connector;
+	struct drm_crtc *crtc;
 	int ret;
 
 	ret = rzg2l_mipi_dsi_start_hs_clock(dsi);
 	if (ret < 0)
 		goto err_stop;
 
+	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
+	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
+	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
+
+	rzg2l_mipi_dsi_set_display_timing(dsi, mode);
+
 	ret = rzg2l_mipi_dsi_start_video(dsi);
 	if (ret < 0)
 		goto err_stop_clock;
-- 
2.43.0