public inbox for drm-ai-reviews@public-inbox.freedesktop.org
 help / color / mirror / Atom feed
From: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Daniel Stone <daniel@fooishbar.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com,
	Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
	Daniel Stone <daniels@collabora.com>
Subject: [PATCH v3 2/4] drm/scdc-helper: Add scdc_status debugfs entry
Date: Tue, 26 May 2026 12:19:58 +0200	[thread overview]
Message-ID: <20260526-scdc-link-health-v3-2-59e4a4aaead1@collabora.com> (raw)
In-Reply-To: <20260526-scdc-link-health-v3-0-59e4a4aaead1@collabora.com>

SCDC provides status information on the current display link. At the
very least, it may be useful to expose this info through debugfs.

Add a debugfs entry for it under the connector, which displays a few
more details parsed out of the SCDC registers. A new
drm_scdc_debugfs_init function can be called by the connector
implementation to initialise the debugfs file.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/display/drm_scdc_helper.c | 228 ++++++++++++++++++++++++++++++
 include/drm/display/drm_scdc_helper.h     |  56 ++++++++
 2 files changed, 284 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
index 8403f2390ab6..75a59c6fc7a5 100644
--- a/drivers/gpu/drm/display/drm_scdc_helper.c
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -24,11 +24,14 @@
 #include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/overflow.h>
 
 #include <drm/display/drm_scdc_helper.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_device.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_print.h>
 
 /**
@@ -55,6 +58,11 @@
 
 #define SCDC_I2C_SLAVE_ADDRESS 0x54
 
+struct scdc_debugfs_priv {
+	struct drm_connector *connector;
+	struct drm_scdc_state state;
+};
+
 /**
  * drm_scdc_read - read a block of data from SCDC
  * @adapter: I2C controller
@@ -276,3 +284,223 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector,
 	return true;
 }
 EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio);
+
+/**
+ * drm_scdc_read_status0_flags - Read SCDC "Status Flags" Register
+ * @connector: pointer to &struct drm_connector to issue the scdc request on
+ * @flags: pointer to the caller's &struct drm_scdc_status_flags to output to
+ *
+ * Reads the SCDC Status Flags 0 register, and outputs its contents to the
+ * destination @flags. Contents of @flags.status0 is only valid if function
+ * returns 0.
+ *
+ * Returns: %0 on success, negative errno on error.
+ */
+int drm_scdc_read_status0_flags(struct drm_connector *connector,
+				struct drm_scdc_status_flags *flags)
+{
+	int ret;
+
+	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_STATUS_UPDATE);
+	if (ret)
+		return ret;
+
+	return drm_scdc_readb(connector->ddc, SCDC_STATUS_FLAGS_0, &flags->status0.data);
+}
+EXPORT_SYMBOL(drm_scdc_read_status0_flags);
+
+/**
+ * drm_scdc_read_error_counters - Read and clear SCDC error counters
+ * @connector: pointer to &struct drm_connector to issue the scdc request on
+ * @counter: Caller's u16 array with 3 elements to write the counter values into
+ *
+ * Read the SCDC channel error counters. If the count of channel *n* is valid,
+ * write it into counter[n]. Otherwise, set counter[n] to 0. Reads all counters
+ * in one read chunk, then clears every counter, as is mandated.
+ *
+ * Returns: %0 on success, negative errno on error.
+ */
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3])
+{
+	u8 buf[7] = { 0 };
+	int ret;
+	u8 sum = 0;
+	int i;
+
+	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_CED_UPDATE);
+	if (ret)
+		return ret;
+
+	ret = drm_scdc_read(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+	if (ret)
+		return ret;
+
+	/*
+	 * Verify the "checksum", i.e. sum up everything including the checksum
+	 * register as a wrapping unsigned 8-bit addition and verify it's 0.
+	 */
+	for (i = 0; i < ARRAY_SIZE(buf); i++)
+		sum = wrapping_add(u8, sum, buf[i]);
+
+	if (sum)
+		return -EPROTO;
+
+	for (i = 0; i < ARRAY_SIZE(buf) - 1; i += 2) {
+		if (buf[i + 1] & SCDC_CHANNEL_VALID)
+			counter[i / 2] = buf[i] | (buf[i + 1] & ~SCDC_CHANNEL_VALID) << 8;
+		else
+			counter[i / 2] = 0;
+
+		buf[i] = 0;
+		buf[i + 1] = 0;
+	}
+	buf[ARRAY_SIZE(buf) - 1] = 0;
+
+	return drm_scdc_write(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+}
+EXPORT_SYMBOL(drm_scdc_read_error_counters);
+
+/**
+ * drm_scdc_read_state - Update state from SCDC
+ * @connector: pointer to a &struct drm_connector on which to operate on
+ * @state: pointer to a &struct drm_scdc_state to fill
+ *
+ * Reads update flags from SCDC, and updates the parts of @state that SCDC
+ * claims have changed, as well as populating those where such a distinction
+ * can't be made.
+ *
+ * Returns: %0 on success, negative errno on failure.
+ */
+int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *state)
+{
+	u8 upd_flags[2] = { 0 };
+	struct i2c_adapter *ddc;
+	struct drm_scdc *scdc;
+	int ret;
+	u8 val;
+
+	if (!state || !connector)
+		return -ENODEV;
+
+	scdc = &connector->display_info.hdmi.scdc;
+	ddc = connector->ddc;
+
+	if (!scdc->supported)
+		return -EOPNOTSUPP;
+
+	ret = drm_scdc_readb(ddc, SCDC_TMDS_CONFIG, &val);
+	if (ret)
+		return ret;
+
+	state->scrambling_enabled = !!(val & SCDC_SCRAMBLING_ENABLE);
+	state->tmds_bclk_x40 = !!(val & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40);
+
+	state->scrambling_detected = drm_scdc_get_scrambling_status(connector);
+
+	ret = drm_scdc_read(ddc, SCDC_UPDATE_0, &upd_flags, sizeof(upd_flags));
+	if (ret)
+		return ret;
+
+	if (upd_flags[0] & SCDC_STATUS_UPDATE) {
+		ret = drm_scdc_read_status0_flags(connector, &state->stf);
+		if (ret)
+			return ret;
+	}
+
+	if (upd_flags[0] & SCDC_CED_UPDATE) {
+		ret = drm_scdc_read_error_counters(connector, state->error_count);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read_state);
+
+#define scdc_print_str(_f, key, s) \
+	(seq_printf((_f), "%-30s: %s\n", (key), (s)))
+#define scdc_print_flag(_f, key, val) \
+	(scdc_print_str((_f), (key), str_yes_no((val))))
+#define scdc_print_dec(_f, key, val) \
+	(seq_printf((_f), "%-30s: %d\n", (key), (val)))
+
+static int scdc_status_show(struct seq_file *m, void *data)
+{
+	struct scdc_debugfs_priv *priv = m->private;
+	struct drm_scdc_state *st = &priv->state;
+	struct drm_connector *connector = priv->connector;
+	struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
+	int ret;
+
+	drm_connector_get(connector);
+
+	if (connector->status != connector_status_connected) {
+		ret = -ENODEV;
+		goto err_conn_put;
+	}
+
+	scdc_print_flag(m, "SCDC Supported", scdc->supported);
+	if (!scdc->supported) {
+		ret = 0;
+		goto err_conn_put;
+	}
+
+	scdc_print_flag(m, "Sink Read Request Capable", scdc->read_request);
+	scdc_print_flag(m, "Scrambling Supported", scdc->scrambling.supported);
+	scdc_print_flag(m, "Low Rate Scrambling Supported", scdc->scrambling.low_rates);
+
+	ret = drm_scdc_read_state(connector, st);
+	drm_connector_put(connector);
+	if (ret)
+		return ret;
+
+	scdc_print_flag(m, "Scrambling Enabled", st->scrambling_enabled);
+	scdc_print_flag(m, "Scrambling Detected", st->scrambling_detected);
+
+	if (st->tmds_bclk_x40)
+		scdc_print_str(m, "TMDS Bit Clock Ratio", "1/40");
+	else
+		scdc_print_str(m, "TMDS Bit Clock Ratio", "1/10");
+
+	scdc_print_flag(m, "Clock Detected", st->stf.status0.flags.clock_detected);
+	scdc_print_flag(m, "Channel 0 Locked", st->stf.status0.flags.ch0_locked);
+	scdc_print_flag(m, "Channel 1 Locked", st->stf.status0.flags.ch1_locked);
+	scdc_print_flag(m, "Channel 2 Locked", st->stf.status0.flags.ch2_locked);
+
+	scdc_print_dec(m, "Channel 0 Errors", st->error_count[0]);
+	scdc_print_dec(m, "Channel 1 Errors", st->error_count[1]);
+	scdc_print_dec(m, "Channel 2 Errors", st->error_count[2]);
+
+	return 0;
+
+err_conn_put:
+	drm_connector_put(connector);
+
+	return ret;
+}
+DEFINE_SHOW_ATTRIBUTE(scdc_status);
+
+/**
+ * drm_scdc_debugfs_init - Initialize scdc files in connector debugfs
+ * @connector: pointer to &struct drm_connector to operate on
+ * @root: debugfs &struct dentry for the debugfs root of @connector
+ *
+ * Creates SCDC-related debugfs files for @connector. Must be called after
+ * @root is already created.
+ */
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root)
+{
+	struct scdc_debugfs_priv *priv;
+
+	if (!root || !connector)
+		return;
+
+	priv = drmm_kzalloc(connector->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return;
+
+	priv->connector = connector;
+
+	debugfs_create_file("scdc_status", 0444, root, priv, &scdc_status_fops);
+}
+EXPORT_SYMBOL(drm_scdc_debugfs_init);
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
index e9ccaeba56dd..c066c1158275 100644
--- a/include/drm/display/drm_scdc_helper.h
+++ b/include/drm/display/drm_scdc_helper.h
@@ -30,6 +30,55 @@
 
 struct drm_connector;
 struct i2c_adapter;
+struct dentry;
+
+struct drm_scdc_status_flags {
+	/* Status Register 0 */
+	union {
+		struct {
+			bool clock_detected : 1;
+			bool ch0_locked : 1;
+			bool ch1_locked : 1;
+			bool ch2_locked : 1;
+			bool rsvd_4 : 1;
+			bool rsvd_5 : 1;
+			bool rsvd_6 : 1;
+			bool rsvd_7 : 1;
+		} flags __packed;
+		u8 data;
+	} status0;
+
+	/* Status Register 1 */
+	union {
+		struct {
+			bool rsvd_0 : 1;
+			bool rsvd_1 : 1;
+			bool rsvd_2 : 1;
+			bool rsvd_3 : 1;
+			bool rsvd_4 : 1;
+			bool rsvd_5 : 1;
+			bool rsvd_6 : 1;
+			bool rsvd_7 : 1;
+		} flags __packed;
+		u8 data;
+	} status1;
+};
+
+struct drm_scdc_state {
+	/** @stf: contents of the status flag registers */
+	struct drm_scdc_status_flags stf;
+	/** @scramling_enabled: true if TMDS scrambling is on */
+	bool scrambling_enabled;
+	/** @scrambling_detected: true if the sink actually detected scrambling */
+	bool scrambling_detected;
+	/**
+	 * @tmds_bclk_x40: true if TMDS bit period is 1/40th of the TMDS
+	 * clock period, false if it's 1/10th of the clock period.
+	 */
+	bool tmds_bclk_x40;
+	/** @error_count: character error counts for each channel */
+	u16 error_count[3];
+};
 
 int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
 		  size_t size);
@@ -77,4 +126,11 @@ bool drm_scdc_get_scrambling_status(struct drm_connector *connector);
 bool drm_scdc_set_scrambling(struct drm_connector *connector, bool enable);
 bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector, bool set);
 
+int drm_scdc_read_status0_flags(struct drm_connector *connector,
+				struct drm_scdc_status_flags *flags);
+int drm_scdc_read_state(struct drm_connector *connector,
+			struct drm_scdc_state *state);
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3]);
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root);
+
 #endif

-- 
2.54.0


  parent reply	other threads:[~2026-05-26 10:20 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-26 10:19 [PATCH v3 0/4] Add SCDC information to connector debugfs Nicolas Frattaroli
2026-05-26 10:19 ` [PATCH v3 1/4] drm/scdc-helper: Don't use ssize_t return type for scdc_read/write Nicolas Frattaroli
2026-05-26 11:35   ` Luca Ceresoli
2026-05-27  5:01   ` Claude review: " Claude Code Review Bot
2026-05-26 10:19 ` Nicolas Frattaroli [this message]
2026-05-26 10:48   ` [PATCH v3 2/4] drm/scdc-helper: Add scdc_status debugfs entry Jani Nikula
2026-05-27  5:01   ` Claude review: " Claude Code Review Bot
2026-05-26 10:19 ` [PATCH v3 3/4] drm/display: bridge_connector: init scdc debugfs for HDMI Nicolas Frattaroli
2026-05-27  5:01   ` Claude review: " Claude Code Review Bot
2026-05-26 10:20 ` [PATCH v3 4/4] drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields Nicolas Frattaroli
2026-05-26 10:52   ` Jani Nikula
2026-05-26 12:25     ` Nicolas Frattaroli
2026-05-26 13:56       ` Jani Nikula
2026-05-27  5:01   ` Claude review: " Claude Code Review Bot
2026-05-27  5:01 ` Claude review: Add SCDC information to connector debugfs Claude Code Review Bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260526-scdc-link-health-v3-2-59e4a4aaead1@collabora.com \
    --to=nicolas.frattaroli@collabora.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=daniel@fooishbar.org \
    --cc=daniels@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox