Re: [PATCH 13/16] drm/msm/a8xx: Implement IFPC support for A840

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/23/26 9:12 PM, Akhil P Oommen wrote:
> Implement pwrup reglist support and add the necessary register
> configurations to enable IFPC support on A840
> 
> Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
> ---

[...]

> +	for (u32 pipe_id = PIPE_BR; pipe_id <= PIPE_DDE_BV; pipe_id++) {
> +		for (i = 0; i < dyn_pwrup_reglist->count; i++) {
> +			if ((dyn_pwrup_reglist->regs[i].pipe & BIT(pipe_id)) == 0)

that's a nitty pet peeve, but I'd check for if (!(...)) instead

[...]

> +				continue;
> +			*dest++ = A8XX_CP_APERTURE_CNTL_HOST_PIPEID(pipe_id);
> +			*dest++ = dyn_pwrup_reglist->regs[i].offset;
> +			*dest++ = a8xx_read_pipe_slice(gpu,
> +						       pipe_id,
> +						       a8xx_get_first_slice(a6xx_gpu),

Only the first slice?

[...]

> +	/* Lo address */
> +	OUT_RING(ring, lower_32_bits(a6xx_gpu->pwrup_reglist_iova));
> +	/* Hi address */
> +	OUT_RING(ring, upper_32_bits(a6xx_gpu->pwrup_reglist_iova));
> +
> +	/* Enable dyn pwrup list with triplets (offset, value, pipe) */
> +	OUT_RING(ring, BIT(31));

I believe you need to patch OUT_PKT7() with the updated cmd count

Konrad