From: Frank Li <Frank.li@nxp.com>
To: Hugo Villeneuve <hugo@hugovil.com>
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
andrzej.hajda@intel.com, neil.armstrong@linaro.org,
rfoss@kernel.org, Laurent.pinchart@ideasonboard.com,
jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@gmail.com,
simona@ffwll.ch, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, shawnguo@kernel.org,
laurent.pinchart+renesas@ideasonboard.com,
antonin.godard@bootlin.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: Re: [PATCH 09/14] ARM: dts: imx6ul-var-som: add proper Wifi and Bluetooth support
Date: Mon, 2 Mar 2026 15:59:43 -0500 [thread overview]
Message-ID: <aaX6P_ulJTq_pipa@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260302190953.669325-10-hugo@hugovil.com>
On Mon, Mar 02, 2026 at 02:03:45PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
>
> The existing configuration of the optional Wifi/Bluetooth module was
> copied from the original Variscite kernel tree, and requires custom
> scripts to properly configure the Wifi/Bluetooth module.
>
> Add proper support for the optional Wifi and Bluetooth configuration on
> VAR-SOM-6UL so that it works out of the box, without any custom scripts.
>
> The SD card interface cannot be used if the Wifi/BT module is in use.
ARM: dts: imx6ul-var-som: add proper Wifi and Bluetooth support
Add the optional Wifi and Bluetooth dtb on AR-SOM-6UL so that it works out
of the box.
The SD card interface cannot be used if the Wifi/BT module is in use.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
> arch/arm/boot/dts/nxp/imx/Makefile | 2 +
> .../dts/nxp/imx/imx6ul-var-som-common.dtsi | 18 ++---
> .../nxp/imx/imx6ul-var-som-concerto-full.dts | 18 +++++
> .../boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi | 75 +++++++++++++++++++
> arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi | 15 ++++
> .../nxp/imx/imx6ull-var-som-concerto-full.dts | 18 +++++
> .../arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi | 15 ++++
> 7 files changed, 151 insertions(+), 10 deletions(-)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts
>
> diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
> index bc534d0fb1412..c7f24ee63071f 100644
> --- a/arch/arm/boot/dts/nxp/imx/Makefile
> +++ b/arch/arm/boot/dts/nxp/imx/Makefile
> @@ -339,6 +339,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ul-tx6ul-0011.dtb \
> imx6ul-tx6ul-mainboard.dtb \
> imx6ul-var-som-concerto.dtb \
> + imx6ul-var-som-concerto-full.dtb \
how about imx6ul-var-som-concerto-wifi.dtb?
> imx6ull-14x14-evk.dtb \
> imx6ull-colibri-aster.dtb \
> imx6ull-colibri-emmc-aster.dtb \
> @@ -377,6 +378,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ull-tqma6ull2-mba6ulx.dtb \
> imx6ull-tqma6ull2l-mba6ulx.dtb \
> imx6ull-var-som-concerto.dtb \
> + imx6ull-var-som-concerto-full.dtb \
> imx6ull-uti260b.dtb \
> imx6ulz-14x14-evk.dtb \
> imx6ulz-bsh-smm-m2.dtb
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
> index dd4ecff1eb786..af8c5d2db53d4 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-common.dtsi
> @@ -19,6 +19,14 @@ memory@80000000 {
> reg = <0x80000000 0x20000000>;
> };
>
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> reg_gpio_dvfs: reg-gpio-dvfs {
> compatible = "regulator-gpio";
> regulator-min-microvolt = <1300000>;
> @@ -68,9 +76,6 @@ ethphy0: ethernet-phy@1 {
> };
>
> &iomuxc {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_hog>;
> -
> pinctrl_enet1: enet1grp {
> fsl,pins = <
> MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
> @@ -97,13 +102,6 @@ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
> >;
> };
>
> - pinctrl_hog: hoggrp {
> - fsl,pins = <
> - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT Enable */
> - MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x03029 /* WLAN Enable */
> - >;
> - };
> -
> pinctrl_i2c1: i2c1grp {
> fsl,pins = <
> MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts
> new file mode 100644
> index 0000000000000..519250b31db24
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto-full.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL
> + * Variscite SoM mounted on it (6UL CPU variant).
> + *
> + * Copyright 2026 Dimonoff
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ul-var-som.dtsi"
> +#include "imx6ul-var-som-concerto-common.dtsi"
> +#include "imx6ul-var-som-wifi.dtsi"
> +
> +/ {
> + model = "Variscite VAR-SOM-6UL Concerto Board (6UL CPU)";
> + compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi
> new file mode 100644
> index 0000000000000..6d16ff7909dab
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-wifi.dtsi
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support optional Wifi/Bluetooth on Variscite VAR-SOM-6UL module.
> + *
> + * Copyright 2019-2024 Variscite Ltd.
> + * Copyright 2026 Dimonoff
> + */
> +
> +/ {
> + reg_sd1_vmmc: regulator_sd1_vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "VMMC1";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + startup-delay-us = <10000>;
> + };
> +
> + usdhc1_pwrseq: usdhc1-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_brcm_wifi>;
> + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_32k_clk: 32kclkgrp {
> + /*
> + * For TP option, an additional oscillator is assembled on the
> + * SOM to provide 32 kHz to the WiFi module. Without TP option,
> + * this pin is configured to provide the 32 KHz clock to the
> + * WiFi module.
> + */
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x03029
> + >;
> + };
> +};
> +
> +&tsc {
> + status = "disabled";
> +};
> +
> +/* Bluetooth UART */
> +&uart2 {
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_brcm_bt>;
> + shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
> + vbat-supply = <®_3p3v>;
> + vddio-supply = <®_3p3v>;
> + };
> +};
> +
> +&usdhc1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_32k_clk>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_32k_clk>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_32k_clk>;
> + no-1-8-v;
> + non-removable;
> + mmc-pwrseq = <&usdhc1_pwrseq>;
> + vmmc-supply = <®_sd1_vmmc>;
> + status = "okay";
> +
> + brcmf: wifi@1 {
> + compatible = "brcm,bcm4329-fmac"; /* LWB option: Sterling LWB5 */
> + reg = <1>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
> index 35a0c0b3603fd..b4e6a9316dd81 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
> @@ -15,3 +15,18 @@ / {
> model = "Variscite VAR-SOM-6UL module";
> compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
> };
> +
> +&iomuxc {
> + pinctrl_brcm_bt: brcm-bt-grp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT_REG_ON (BT_EN) */
> + >;
> + };
> +
> + pinctrl_brcm_wifi: brcm-wifi-grp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* WL_PWR (WIFI_PWR 5G) */
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WL_REG_ON (WIFI_EN) */
> + >;
> + };
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts
> new file mode 100644
> index 0000000000000..7c0e313603630
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som-concerto-full.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-6UL
> + * Variscite SoM mounted on it (6ULL CPU variant).
> + *
> + * Copyright 2026 Dimonoff
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ull-var-som.dtsi"
> +#include "imx6ul-var-som-concerto-common.dtsi"
> +#include "imx6ul-var-som-wifi.dtsi"
> +
> +/ {
> + model = "Variscite VAR-SOM-6UL Concerto Board (6ULL CPU)";
> + compatible = "variscite,mx6ullconcerto", "variscite,var-som-imx6ull", "fsl,imx6ull";
> +};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi
> index ba482a97623b2..3067ff6a1bc74 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-var-som.dtsi
> @@ -13,3 +13,18 @@ / {
> model = "Variscite VAR-SOM-6UL module";
> compatible = "variscite,var-som-imx6ull", "fsl,imx6ull";
> };
> +
> +&iomuxc {
> + pinctrl_brcm_bt: brcm-bt-grp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* BT_REG_ON (BT_EN) */
> + >;
> + };
> +
> + pinctrl_brcm_wifi: brcm-wifi-grp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* WL_PWR (WIFI_PWR 5G) */
> + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WL_REG_ON (WIFI_EN) */
> + >;
> + };
> +};
> --
> 2.47.3
>
next prev parent reply other threads:[~2026-03-02 21:00 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-02 19:03 [PATCH 00/14] var-som-6ul: improve support for variants Hugo Villeneuve
2026-03-02 19:03 ` [PATCH 01/14] ARM: dts: imx6ul-var-som: fix warning for non-existent dc-supply property Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 02/14] ARM: dts: imx6ul-var-som: fix warning for boolean property with a value Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 03/14] ARM: dts: imx6ul-var-som: change incorrect VAR-SOM-6UL model name Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 04/14] dt-bindings: arm: fsl: " Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 05/14] dt-bindings: arm: fsl: add variscite,var-som-imx6ull Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 06/14] ARM: dts: imx6ul-var-som: Factor out common parts for all CPU variants Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 07/14] ARM: dts: imx6ul-var-som-concerto: " Hugo Villeneuve
2026-03-02 20:50 ` Frank Li
2026-03-02 21:07 ` Hugo Villeneuve
2026-03-02 21:28 ` Frank Li
2026-03-02 21:36 ` Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 08/14] ARM: dts: imx6ul-var-som: factor out SD card support Hugo Villeneuve
2026-03-02 20:54 ` Frank Li
2026-03-02 21:15 ` Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 09/14] ARM: dts: imx6ul-var-som: add proper Wifi and Bluetooth support Hugo Villeneuve
2026-03-02 20:59 ` Frank Li [this message]
2026-03-02 21:42 ` Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 10/14] ARM: dts: imx6ul-var-som: factor out ENET2 ethernet support Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 11/14] ARM: dts: imx6ul-var-som: add support for EC configuration option (ENET1) Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 12/14] ARM: dts: imx6ul-var-som: factor out audio support Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 13/14] dt-bindings: display/lvds-codec: add ti,sn65lvds93 Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-02 19:03 ` [PATCH 14/14] ARM: dts: imx6ul-var-som: add support for LVDS display panel Hugo Villeneuve
2026-03-03 2:58 ` Claude review: " Claude Code Review Bot
2026-03-03 2:58 ` Claude review: var-som-6ul: improve support for variants Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aaX6P_ulJTq_pipa@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=antonin.godard@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=hugo@hugovil.com \
--cc=hvilleneuve@dimonoff.com \
--cc=imx@lists.linux.dev \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox