Claude review: Support for the Pixel 3a XL with the Tianma panel

Claude review: Support for the Pixel 3a XL with the Tianma panel

[Claude Code Review Bot]

Overall Series Review

Subject: Support for the Pixel 3a XL with the Tianma panel
Author: Richard Acayan <mailingradian@gmail.com>
Patches: 10
Reviewed: 2026-02-11T16:47:57.512044

---

This 6-patch series adds support for the Google Pixel 3a XL (Bonito) with the Tianma/Novatek NT37700F AMOLED panel to the Linux kernel. The series refactors existing Pixel 3a (Sargo) device trees into a common include file, adds a new panel driver, and creates device-specific configurations.

**HIGH-LEVEL ASSESSMENT:**

**CRITICAL ISSUES:**
1. **Wrong binding file** - Patch 2 adds NT37700F to panel-simple-dsi.yaml, but Patch 3 implements a full custom driver with vendor-specific commands, not a simple-dsi panel. Needs dedicated binding documentation.
2. **Commit message error** - Patch 1 describes "bonito-sdc" but adds "bonito-tianma" compatible string
3. **TODO in production code** - Panel driver contains unresolved TODO comment that must be removed
4. **License change** - Patch 5 changes from GPL-2.0 to GPL-2.0-only without explanation
5. **Compatible string issue** - Should be vendor-specific "tianma,nt37700f" not generic "novatek,nt37700f"

**MAJOR ISSUES:**
1. Missing base "google,bonito" compatible documentation
2. Touchscreen dimension change (62mm→63mm) buried in refactoring without explanation
3. Copyright years (2023-2024) don't match submission date (2026)
4. Module description says "cmd mode" but driver uses video mode
5. C++ style comments in device tree files

**POSITIVE ASPECTS:**
- Clean driver implementation using modern kernel APIs (mipi_dsi_multi_context)
- Logical device tree refactoring approach
- Proper error handling in most paths
- Good use of DRM panel helper functions

**OVERALL RECOMMENDATION:** **NACK** - Series requires significant revision before merging.

---

---
Generated by Claude Code Patch Reviewer

[PATCH v2 0/6] Support for the Pixel 3a XL with the Tianma panel

[Richard Acayan]

This expands Pixel 3a support to the Pixel 3a XL, starting with one of
the panel variants. The Pixel 3a XL has two variants with panels from
Samsung or from Tianma/Novatek.

This series depends on the IMX355 front camera devicetree patches.

Changes since v1 (https://lore.kernel.org/r/20260210023300.15785-1-mailingradian@gmail.com):
- use multi functions in disable callback (3/6)
- add and reformat comments about XL differences (5/6)
- mention the sdc panel (6/6)
- explain google,bonito compatible (1/6)
- remove TODO item in code (3/6)
- add review and testing tags (2/6, 3/6, 5/6)

Richard Acayan (6):
  dt-bindings: arm: qcom: document google,bonito-tianma board
  dt-bindings: panel-simple-dsi: add nt37700f compatible
  drm/panel: Add Novatek/Tianma NT37700F panel
  arm64: dts: qcom: sdm670-google-sargo: add touchscreen and display
    labels
  arm64: dts: qcom: sdm670-google: add common device tree include
  arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../display/panel/panel-simple-dsi.yaml       |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../dts/qcom/sdm670-google-bonito-tianma.dts  |  38 +
 ...le-sargo.dts => sdm670-google-common.dtsi} |  24 +-
 .../boot/dts/qcom/sdm670-google-sargo.dts     | 710 +-----------------
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-novatek-nt37700f.c    | 282 +++++++
 9 files changed, 363 insertions(+), 710 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
 copy arch/arm64/boot/dts/qcom/{sdm670-google-sargo.dts => sdm670-google-common.dtsi} (97%)
 create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt37700f.c

-- 
2.53.0

[PATCH v2 1/6] dt-bindings: arm: qcom: document google, bonito-tianma board

[Richard Acayan]

The Pixel 3a XL is code-named by Google as "bonito". The
google,bonito-tianma compatible represents a variant of the Pixel 3a XL
board with a Tianma/Novatek NT37700F panel. Document the google,bonito
board compatible and the google,bonito-tianma variant in the bindings.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index d84bd3bca201..59118faffb02 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -831,6 +831,12 @@ properties:
               - google,sargo
           - const: qcom,sdm670
 
+      - items:
+          - enum:
+              - google,bonito-tianma
+          - const: google,bonito
+          - const: qcom,sdm670
+
       - items:
           - enum:
               - qcom,sdx55-mtp
-- 
2.53.0

[PATCH v2 2/6] dt-bindings: panel-simple-dsi: add nt37700f compatible

[Richard Acayan]

Add the compatible for the NT37700F panel found on the Pixel 3a XL.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/display/panel/panel-simple-dsi.yaml     | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
index 8d668979b62d..e56865d2771b 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -49,6 +49,8 @@ properties:
       - lg,lh500wx1-sd03
         # Lincoln LCD197 5" 1080x1920 LCD panel
       - lincolntech,lcd197
+        # Novatek NT37700F 1080x2160 AMOLED panel
+      - novatek,nt37700f
         # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2587-53ts
         # Panasonic 10" WUXGA TFT LCD panel
-- 
2.53.0

[PATCH v2 3/6] drm/panel: Add Novatek/Tianma NT37700F panel

[Richard Acayan]

Some Pixel 3a XL devices have a Tianma panel. Add support for it, with
the aid of linux-mdss-dsi-panel-driver-generator.

Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Yifei Zhan <yifei@zhan.science>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-novatek-nt37700f.c    | 282 ++++++++++++++++++
 3 files changed, 292 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt37700f.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 76f6af819037..138d617e8195 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -553,6 +553,15 @@ config DRM_PANEL_NOVATEK_NT36672E
 	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
 	  RGB per pixel.
 
+config DRM_PANEL_NOVATEK_NT37700F
+	tristate "Novatek NT37700F DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Novatek NT37700F DSI
+	  panel module. The panel has a resolution of 1080x2160.
+
 config DRM_PANEL_NOVATEK_NT37801
 	tristate "Novatek NT37801/NT37810 AMOLED DSI panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index b9562a6fdcb3..9218a7d7ff34 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36523) += panel-novatek-nt36523.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672E) += panel-novatek-nt36672e.o
+obj-$(CONFIG_DRM_PANEL_NOVATEK_NT37700F) += panel-novatek-nt37700f.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT37801) += panel-novatek-nt37801.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
 obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt37700f.c b/drivers/gpu/drm/panel/panel-novatek-nt37700f.c
new file mode 100644
index 000000000000..e7e6343b2963
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-novatek-nt37700f.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024, The Linux Foundation. All rights reserved.
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+ *   Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+struct nt37700f_tianma {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline
+struct nt37700f_tianma *to_nt37700f_tianma(struct drm_panel *panel)
+{
+	return container_of(panel, struct nt37700f_tianma, panel);
+}
+
+static void nt37700f_tianma_reset(struct nt37700f_tianma *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int nt37700f_tianma_on(struct nt37700f_tianma *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0x56);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xca, 0x52);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x06);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb5, 0x2b, 0x1a);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x01);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcd, 0x04, 0x82);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcc, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0xaa, 0x55, 0xa5, 0x80);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x55);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf6, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x56);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf6, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0xaa, 0x55, 0xa5, 0x81);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x07);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf3, 0x07);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x05);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf3, 0x25);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x90, 0x01);
+
+	mipi_dsi_dcs_set_column_address_multi(&dsi_ctx, 0x0000, 1080 - 1);
+	mipi_dsi_dcs_set_page_address_multi(&dsi_ctx, 0x0000, 2160 - 1);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0x56);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x02);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xcd, 0x00);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x04);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd0, 0x11, 0x64);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x6f, 0x09);
+	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb1, 0x20);
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 120);
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int nt37700f_tianma_disable(struct drm_panel *panel)
+{
+	struct nt37700f_tianma *ctx = to_nt37700f_tianma(panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 100);
+
+	return dsi_ctx.accum_err;
+}
+
+static int nt37700f_tianma_prepare(struct drm_panel *panel)
+{
+	struct nt37700f_tianma *ctx = to_nt37700f_tianma(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	nt37700f_tianma_reset(ctx);
+
+	ret = nt37700f_tianma_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nt37700f_tianma_unprepare(struct drm_panel *panel)
+{
+	struct nt37700f_tianma *ctx = to_nt37700f_tianma(panel);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	return 0;
+}
+
+static const struct drm_display_mode nt37700f_tianma_mode = {
+	.clock = (1080 + 32 + 32 + 98) * (2160 + 32 + 4 + 98) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 32,
+	.hsync_end = 1080 + 32 + 32,
+	.htotal = 1080 + 32 + 32 + 98,
+	.vdisplay = 2160,
+	.vsync_start = 2160 + 32,
+	.vsync_end = 2160 + 32 + 4,
+	.vtotal = 2160 + 32 + 4 + 98,
+	.width_mm = 69,
+	.height_mm = 137,
+	.type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int nt37700f_tianma_get_modes(struct drm_panel *panel,
+				     struct drm_connector *connector)
+{
+	return drm_connector_helper_get_modes_fixed(connector, &nt37700f_tianma_mode);
+}
+
+static const struct drm_panel_funcs nt37700f_tianma_panel_funcs = {
+	.prepare = nt37700f_tianma_prepare,
+	.unprepare = nt37700f_tianma_unprepare,
+	.disable = nt37700f_tianma_disable,
+	.get_modes = nt37700f_tianma_get_modes,
+};
+
+static int nt37700f_tianma_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static int nt37700f_tianma_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return brightness;
+}
+
+static const struct backlight_ops nt37700f_tianma_bl_ops = {
+	.update_status = nt37700f_tianma_bl_update_status,
+	.get_brightness = nt37700f_tianma_bl_get_brightness,
+};
+
+static struct backlight_device *
+nt37700f_tianma_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 2047,
+		.max_brightness = 2047,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &nt37700f_tianma_bl_ops, &props);
+}
+
+static int nt37700f_tianma_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct nt37700f_tianma *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
+
+	drm_panel_init(&ctx->panel, dev, &nt37700f_tianma_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = nt37700f_tianma_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		drm_panel_remove(&ctx->panel);
+		return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+	}
+
+	return 0;
+}
+
+static void nt37700f_tianma_remove(struct mipi_dsi_device *dsi)
+{
+	struct nt37700f_tianma *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id nt37700f_tianma_of_match[] = {
+	{ .compatible = "novatek,nt37700f" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nt37700f_tianma_of_match);
+
+static struct mipi_dsi_driver nt37700f_tianma_driver = {
+	.probe = nt37700f_tianma_probe,
+	.remove = nt37700f_tianma_remove,
+	.driver = {
+		.name = "panel-novatek-nt37700f",
+		.of_match_table = nt37700f_tianma_of_match,
+	},
+};
+module_mipi_dsi_driver(nt37700f_tianma_driver);
+
+MODULE_DESCRIPTION("DRM driver for nt37700f cmd mode dsi tianma panel");
+MODULE_LICENSE("GPL");
-- 
2.53.0

[PATCH v2 4/6] arm64: dts: qcom: sdm670-google-sargo: add touchscreen and display labels

[Richard Acayan]

The touchscreen and framebuffer can have different resolutions on the
Pixel 3a and 3a XL. Label them so the resolutions can be modified, in
anticipation of the addition of the Pixel 3a XL.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index e925cba0381f..2e86bed9ea8c 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -48,7 +48,7 @@ chosen {
 		#size-cells = <2>;
 		ranges;
 
-		framebuffer@9c000000 {
+		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
 			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
 			width = <1080>;
@@ -516,7 +516,7 @@ rmi4-f01@1 {
 			syna,nosleep-mode = <1>;
 		};
 
-		rmi4-f12@12 {
+		rmi4_f12: rmi4-f12@12 {
 			reg = <0x12>;
 			touchscreen-x-mm = <62>;
 			touchscreen-y-mm = <127>;
@@ -533,7 +533,7 @@ &mdss_dsi0 {
 	vdda-supply = <&vreg_l1a_1p225>;
 	status = "okay";
 
-	panel@0 {
+	panel: panel@0 {
 		compatible = "samsung,s6e3fa7-ams559nk06";
 		reg = <0>;
 
-- 
2.53.0

[PATCH v2 5/6] arm64: dts: qcom: sdm670-google: add common device tree include

[Richard Acayan]

The Pixel 3a XL can be supported by reusing most of the device tree from
the Pixel 3a. Move the common elements to a common device tree include
like with other devices.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 ...le-sargo.dts => sdm670-google-common.dtsi} |  18 +-
 .../boot/dts/qcom/sdm670-google-sargo.dts     | 710 +-----------------
 2 files changed, 21 insertions(+), 707 deletions(-)
 copy arch/arm64/boot/dts/qcom/{sdm670-google-sargo.dts => sdm670-google-common.dtsi} (97%)

diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
similarity index 97%
copy from arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
copy to arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
index 2e86bed9ea8c..c47e78aeef9e 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
@@ -6,8 +6,6 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -28,9 +26,6 @@
 /delete-node/ &gpu_mem;
 
 / {
-	model = "Google Pixel 3a";
-	compatible = "google,sargo", "qcom,sdm670";
-
 	aliases { };
 
 	battery: battery {
@@ -38,7 +33,6 @@ battery: battery {
 
 		voltage-min-design-microvolt = <3312000>;
 		voltage-max-design-microvolt = <4400000>;
-		charge-full-design-microamp-hours = <3000000>;
 	};
 
 	chosen {
@@ -50,11 +44,9 @@ chosen {
 
 		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
-			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
-			width = <1080>;
-			height = <2220>;
-			stride = <(1080 * 4)>;
+			/* dimensions and size are in specific device trees */
 			format = "a8r8g8b8";
+			status = "disabled";
 		};
 	};
 
@@ -518,8 +510,6 @@ rmi4-f01@1 {
 
 		rmi4_f12: rmi4-f12@12 {
 			reg = <0x12>;
-			touchscreen-x-mm = <62>;
-			touchscreen-y-mm = <127>;
 			syna,sensor-type = <1>;
 		};
 	};
@@ -534,7 +524,7 @@ &mdss_dsi0 {
 	status = "okay";
 
 	panel: panel@0 {
-		compatible = "samsung,s6e3fa7-ams559nk06";
+		/* compatible is provided in specific device trees */
 		reg = <0>;
 
 		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
@@ -544,6 +534,8 @@ panel: panel@0 {
 
 		power-supply = <&vreg_l6b_3p3>;
 
+		status = "disabled";
+
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&mdss_dsi0_out>;
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index 2e86bed9ea8c..7a3e24997232 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -1,715 +1,37 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
- * xiaomi-lavender device tree, and oneplus-common device tree.
+ * Device tree for Google Pixel 3a (non-XL).
  *
- * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ * Copyright (c) 2023, Richard Acayan. All rights reserved.
  */
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include "sdm670.dtsi"
-#include "pm660.dtsi"
-#include "pm660l.dtsi"
-
-/delete-node/ &mpss_region;
-/delete-node/ &venus_mem;
-/delete-node/ &wlan_msa_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &mba_region;
-/delete-node/ &adsp_mem;
-/delete-node/ &ipa_fw_mem;
-/delete-node/ &ipa_gsi_mem;
-/delete-node/ &gpu_mem;
+#include "sdm670-google-common.dtsi"
 
 / {
 	model = "Google Pixel 3a";
 	compatible = "google,sargo", "qcom,sdm670";
-
-	aliases { };
-
-	battery: battery {
-		compatible = "simple-battery";
-
-		voltage-min-design-microvolt = <3312000>;
-		voltage-max-design-microvolt = <4400000>;
-		charge-full-design-microamp-hours = <3000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		framebuffer: framebuffer@9c000000 {
-			compatible = "simple-framebuffer";
-			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
-			width = <1080>;
-			height = <2220>;
-			stride = <(1080 * 4)>;
-			format = "a8r8g8b8";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vol_up_pin>;
-
-		key-vol-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		mpss_region: mpss@8b000000 {
-			reg = <0 0x8b000000 0 0x9800000>;
-			no-map;
-		};
-
-		venus_mem: venus@94800000 {
-			reg = <0 0x94800000 0 0x500000>;
-			no-map;
-		};
-
-		wlan_msa_mem: wlan-msa@94d00000 {
-			reg = <0 0x94d00000 0 0x100000>;
-			no-map;
-		};
-
-		cdsp_mem: cdsp@94e00000 {
-			reg = <0 0x94e00000 0 0x800000>;
-			no-map;
-		};
-
-		mba_region: mba@95600000 {
-			reg = <0 0x95600000 0 0x200000>;
-			no-map;
-		};
-
-		adsp_mem: adsp@95800000 {
-			reg = <0 0x95800000 0 0x2200000>;
-			no-map;
-		};
-
-		ipa_fw_mem: ipa-fw@97a00000 {
-			reg = <0 0x97a00000 0 0x10000>;
-			no-map;
-		};
-
-		ipa_gsi_mem: ipa-gsi@97a10000 {
-			reg = <0 0x97a10000 0 0x5000>;
-			no-map;
-		};
-
-		gpu_mem: gpu@97a15000 {
-			reg = <0 0x97a15000 0 0x2000>;
-			no-map;
-		};
-
-		framebuffer-region@9c000000 {
-			reg = <0 0x9c000000 0 0x2400000>;
-			no-map;
-		};
-
-		/* Also includes ramoops regions */
-		debug_info_mem: debug-info@a1800000 {
-			reg = <0 0xa1800000 0 0x411000>;
-			no-map;
-		};
-	};
-
-	/*
-	 * The touchscreen regulator seems to be controlled somehow by a gpio.
-	 * Model it as a fixed regulator and keep it on. Without schematics we
-	 * don't know how this is actually wired up...
-	 */
-	ts_1p8_supply: ts-1p8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ts_1p8_supply";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3312000>;
-		regulator-max-microvolt = <3312000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/*
-	 * Supply map from xiaomi-lavender specifies this as the supply for
-	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
-	 * this as a power domain. Set this as a fixed regulator with the same
-	 * voltage as lavender until display is needed to avoid unneccessarily
-	 * using a deprecated binding (regulator-fixed-domain).
-	 */
-	vreg_s2b_1p05: vreg-s2b-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s2b";
-		regulator-min-microvolt = <1050000>;
-		regulator-max-microvolt = <1050000>;
-	};
-
-	cam_front_ldo: cam-front-ldo-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "cam_front_ldo";
-		regulator-min-microvolt = <1352000>;
-		regulator-max-microvolt = <1352000>;
-		regulator-enable-ramp-delay = <135>;
-
-		gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&cam_front_ldo_pin>;
-		pinctrl-names = "default";
-	};
-
-	cam_vio_ldo: cam-vio-ldo-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "cam_vio_ldo";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-enable-ramp-delay = <233>;
-
-		gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&cam_vio_pin>;
-		pinctrl-names = "default";
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm660-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-
-		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
-		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
-		vdd-l5-supply = <&vreg_s2b_1p05>;
-		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
-		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
-
-		/*
-		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
-		 * by the Core Power Reduction hardened (CPRh) and the
-		 * Operating State Manager (OSM) HW automatically.
-		 */
-
-		vreg_s4a_2p04: smps4 {
-			regulator-min-microvolt = <1808000>;
-			regulator-max-microvolt = <2040000>;
-			regulator-enable-ramp-delay = <200>;
-		};
-
-		vreg_s6a_0p87: smps6 {
-			regulator-min-microvolt = <1224000>;
-			regulator-max-microvolt = <1352000>;
-			regulator-enable-ramp-delay = <150>;
-		};
-
-		/* LDOs */
-		vreg_l1a_1p225: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l2a_1p0: ldo2 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l3a_1p0: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l5a_0p848: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l6a_1p3: ldo6 {
-			regulator-min-microvolt = <1248000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l7a_1p2: ldo7 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l8a_1p8: ldo8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-			regulator-always-on;
-		};
-
-		vreg_l9a_1p8: ldo9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l10a_1p8: ldo10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l11a_1p8: ldo11 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l13a_1p8: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l14a_1p8: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l15a_1p8: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l16a_2p7: ldo16 {
-			regulator-min-microvolt = <2696000>;
-			regulator-max-microvolt = <2696000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l17a_1p8: ldo17 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l19a_3p3: ldo19 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm660l-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
-		vdd-l2-supply = <&vreg_bob>;
-		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
-		vdd-l4-l6-supply = <&vreg_bob>;
-		vdd-bob-supply = <&vph_pwr>;
-
-		/* LDOs */
-		vreg_l1b_0p925: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <900000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l2b_2p95: ldo2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l3b_3p0: ldo3 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l4b_2p95: ldo4 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l5b_2p95: ldo5 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l6b_3p3: ldo6 {
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l7b_3p125: ldo7 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l8b_3p3: ldo8 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		/*
-		 * Downstream specifies a fixed voltage of 3.312 V, but the
-		 * PMIC4 BOB ranges don't support that. Widen the range a
-		 * little to avoid adding a new BOB regulator type.
-		 */
-		vreg_bob: bob {
-			regulator-min-microvolt = <3296000>;
-			regulator-max-microvolt = <3328000>;
-			regulator-enable-ramp-delay = <500>;
-		};
-	};
-};
-
-&camss {
-	vdda-phy-supply = <&vreg_l1a_1p225>;
-	vdda-pll-supply = <&vreg_s6a_0p87>;
-
-	status = "okay";
-};
-
-&camss_port1 {
-	camss_endpoint1: endpoint {
-		data-lanes = <0 1 2 3>;
-		remote-endpoint = <&cam_front_endpoint>;
-	};
-};
-
-&cci {
-	pinctrl-0 = <&cci1_default>;
-	pinctrl-1 = <&cci1_sleep>;
-	pinctrl-names = "default", "sleep";
-
-	status = "okay";
-};
-
-&cci_i2c1 {
-	camera@1a {
-		compatible = "sony,imx355";
-		reg = <0x1a>;
-
-		clocks = <&camcc CAM_CC_MCLK2_CLK>;
-
-		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
-		assigned-clock-rates = <19200000>;
-
-		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-
-		avdd-supply = <&cam_front_ldo>;
-		dvdd-supply = <&cam_front_ldo>;
-		dovdd-supply = <&cam_vio_ldo>;
-
-		pinctrl-0 = <&cam_mclk2_default>;
-		pinctrl-names = "default";
-
-		rotation = <270>;
-		orientation = <0>;
-
-		port {
-			cam_front_endpoint: endpoint {
-				link-frequencies = /bits/ 64 <360000000>;
-				remote-endpoint = <&camss_endpoint1>;
-			};
-		};
-	};
-};
-
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&gpu_zap_shader {
-	firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
-};
-
-&i2c9 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	synaptics-rmi4-i2c@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_default>;
-
-		vio-supply = <&ts_1p8_supply>;
-
-		syna,reset-delay-ms = <200>;
-		syna,startup-delay-ms = <200>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x01>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4_f12: rmi4-f12@12 {
-			reg = <0x12>;
-			touchscreen-x-mm = <62>;
-			touchscreen-y-mm = <127>;
-			syna,sensor-type = <1>;
-		};
-	};
 };
 
-&mdss {
-	status = "okay";
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
 };
 
-&mdss_dsi0 {
-	vdda-supply = <&vreg_l1a_1p225>;
+&framebuffer {
+	reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+	width = <1080>;
+	height = <2220>;
+	stride = <(1080 * 4)>;
 	status = "okay";
-
-	panel: panel@0 {
-		compatible = "samsung,s6e3fa7-ams559nk06";
-		reg = <0>;
-
-		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_default>;
-
-		power-supply = <&vreg_l6b_3p3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mdss_dsi0_out>;
-			};
-		};
-	};
 };
 
-&mdss_dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&mdss_dsi0_phy {
-	vdds-supply = <&vreg_l1b_0p925>;
-	status = "okay";
-};
-
-&mdss_mdp {
+&panel {
+	compatible = "samsung,s6e3fa7-ams559nk06";
 	status = "okay";
 };
 
-&pm660_charger {
-	monitored-battery = <&battery>;
-	status = "okay";
-};
-
-&pm660_gpios {
-	cam_vio_pin: cam-vio-state {
-		pins = "gpio13";
-		function = "normal";
-		power-source = <0>;
-	};
-};
-
-&pm660_rradc {
-	status = "okay";
-};
-
-&pm660l_flash {
-	status = "okay";
-
-	led-0 {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-sources = <1>, <2>;
-		led-max-microamp = <500000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1280000>;
-	};
-};
-
-&pm660l_gpios {
-	cam_front_ldo_pin: cam-front-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <0>;
-	};
-
-	vol_up_pin: vol-up-state {
-		pins = "gpio7";
-		function = "normal";
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		input-enable;
-		bias-pull-up;
-	};
-};
-
-&pon_pwrkey {
-	status = "okay";
-};
-
-&pon_resin {
-	linux,code = <KEY_VOLUMEDOWN>;
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&sdhc_1 {
-	supports-cqe;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-ddr-1_8v;
-
-	qcom,ddr-config = <0xc3040873>;
-
-	vmmc-supply = <&vreg_l4b_2p95>;
-	vqmmc-supply = <&vreg_l8a_1p8>;
-
-	status = "okay";
-};
-
-&tlmm {
-	gpio-reserved-ranges = <0 4>, <81 4>;
-
-	panel_default: panel-default-state {
-		te-pins {
-			pins = "gpio10";
-			function = "mdp_vsync";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		reset-pins {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		mode-pins {
-			pins = "gpio76";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	touchscreen_default: ts-default-state {
-		ts-reset-pins {
-			pins = "gpio99";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-
-		ts-irq-pins {
-			pins = "gpio125";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		ts-switch-pins {
-			pins = "gpio135";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-};
-
-&usb_1_hsphy {
-	vdd-supply = <&vreg_l1b_0p925>;
-	vdda-pll-supply = <&vreg_l10a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/* Only peripheral works for now */
-	dr_mode = "peripheral";
-
-	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
-	maximum-speed = "high-speed";
+&rmi4_f12 {
+	touchscreen-x-mm = <63>;
+	touchscreen-y-mm = <127>;
 };
-- 
2.53.0

[PATCH v2 6/6] arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

[Richard Acayan]

The Pixel 3a XL has variants with either a Samsung Display Controller (SDC)
panel or a Tianma panel. Add the device tree for the variant with the
Tianma panel.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../dts/qcom/sdm670-google-bonito-tianma.dts  | 38 +++++++++++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f34d5ed331c..6237aeb0e36d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-bonito-tianma.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 
 sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
new file mode 100644
index 000000000000..da309434b511
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree for Google Pixel 3a XL with the panel connected to the Samsung
+ * Display Controller.
+ *
+ * Copyright (c) 2023-2024, Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm670-google-common.dtsi"
+
+/ {
+	model = "Google Pixel 3a XL (with Tianma panel)";
+	compatible = "google,bonito-tianma", "google,bonito", "qcom,sdm670";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3700000>;
+};
+
+&framebuffer {
+	reg = <0 0x9c000000 0 (1080 * 2160 * 4)>;
+	width = <1080>;
+	height = <2160>;
+	stride = <(1080 * 4)>;
+	status = "okay";
+};
+
+&panel {
+	compatible = "novatek,nt37700f";
+	status = "okay";
+};
+
+&rmi4_f12 {
+	touchscreen-x-mm = <69>;
+	touchscreen-y-mm = <137>;
+};
-- 
2.53.0

Claude review: Support for the Pixel 3a XL with the Tianma panel

[Claude Code Review Bot]

Overall Series Review

Subject: Support for the Pixel 3a XL with the Tianma panel
Author: Richard Acayan <mailingradian@gmail.com>
Patches: 7
Reviewed: 2026-02-17T15:51:43.373818

---

This series adds support for the Google Pixel 3a XL (codename "bonito") with the Tianma/Novatek NT37700F panel variant. It consists of DT bindings additions (patches 1-2), a new panel driver (patch 3), preparatory DTS label additions (patch 4), refactoring of the existing sargo DTS into a common include (patch 5), and the new bonito-tianma DTS (patch 6).

The overall approach is clean and follows established patterns. The DTS refactoring to extract common elements into a shared include is a sensible way to support the closely-related 3a and 3a XL devices. The panel driver is generated from the vendor's DSI command sequences using the well-known `linux-mdss-dsi-panel-driver-generator` tool and follows the modern `mipi_dsi_multi_context` pattern.

There are a few issues to address. The most notable is a comment in patch 6 that says the opposite of what the file actually describes. There is also a value change in patch 5 that changes the Pixel 3a's touchscreen-x-mm from 62 to 63 without explanation. Both should be clarified.

---
Generated by Claude Code Patch Reviewer

Claude review: dt-bindings: arm: qcom: document google, bonito-tianma board

[Claude Code Review Bot]

Patch Review

> +      - items:
> +          - enum:
> +              - google,bonito-tianma
> +          - const: google,bonito
> +          - const: qcom,sdm670

This looks correct. The three-level compatible chain (board-variant, board, SoC) follows the standard Qualcomm DT bindings pattern. The bonito-tianma variant falls back to the generic bonito board, which falls back to the sdm670 SoC. No issues found.

---
Generated by Claude Code Patch Reviewer

Claude review: dt-bindings: panel-simple-dsi: add nt37700f compatible

[Claude Code Review Bot]

Patch Review

> +        # Novatek NT37700F 1080x2160 AMOLED panel
> +      - novatek,nt37700f

Adding the compatible to panel-simple-dsi.yaml while patch 3 adds a dedicated panel driver might seem contradictory given the yaml file's note that "If the panel is more advanced a dedicated binding file is required." However, there is precedent for this pattern (e.g., `lincolntech,lcd197` is listed in panel-simple-dsi.yaml but also has a dedicated driver). No issues, though a dedicated binding yaml might be cleaner long-term.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/panel: Add Novatek/Tianma NT37700F panel

[Claude Code Review Bot]

Patch Review

The panel driver follows established patterns. A few observations:

> +static void nt37700f_tianma_reset(struct nt37700f_tianma *ctx)
> +{
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +	usleep_range(1000, 2000);
> +	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +	usleep_range(10000, 11000);
> +}

The reset GPIO is requested with `GPIOD_OUT_HIGH` in probe, meaning the panel starts in reset. The reset sequence asserts (1), waits, deasserts (0), waits. This is consistent with the `unprepare` path which sets the GPIO to 1 (asserting reset). Fine.

> +	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
> +			  MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;

The mode flags combine video burst mode with LPM for command sequences. This is a standard pattern seen in other panel drivers (e.g., `panel-samsung-sofef00.c`).

> +static int nt37700f_tianma_bl_update_status(struct backlight_device *bl)
> +{
> +	struct mipi_dsi_device *dsi = bl_get_data(bl);
> +	u16 brightness = backlight_get_brightness(bl);
> +	int ret;
> +
> +	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> +	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
> +	if (ret < 0)
> +		return ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;

Temporarily clearing and restoring `MIPI_DSI_MODE_LPM` to send brightness commands in HS mode is not thread-safe -- if two callers hit this concurrently, the flag manipulation could race. That said, this is a common pattern found in many generated panel drivers and the backlight framework serializes calls through a mutex, so in practice this is fine.

> + * Copyright (c) 2024, The Linux Foundation. All rights reserved.

Minor: the copyright year says 2024, though the patch is being submitted in 2026. This is cosmetic and doesn't affect functionality. Also, attributing a generated driver to "The Linux Foundation" may not be accurate -- typically the author of the driver would be listed.

Overall, the driver is straightforward and correct. No functional bugs found.

---
Generated by Claude Code Patch Reviewer

Claude review: arm64: dts: qcom: sdm670-google-sargo: add touchscreen and display labels

[Claude Code Review Bot]

Patch Review

> -		framebuffer@9c000000 {
> +		framebuffer: framebuffer@9c000000 {

> -		rmi4-f12@12 {
> +		rmi4_f12: rmi4-f12@12 {

> -	panel@0 {
> +	panel: panel@0 {

Simple label additions to enable overrides from the variant-specific DTS files in later patches. No issues found.

---
Generated by Claude Code Patch Reviewer

Claude review: arm64: dts: qcom: sdm670-google: add common device tree include

[Claude Code Review Bot]

Patch Review

This is the main refactoring patch. The approach of extracting common elements into `sdm670-google-common.dtsi` and making per-device DTS files thin overlays is clean.

> -		charge-full-design-microamp-hours = <3000000>;

The `charge-full-design-microamp-hours` property is removed from the common include and added back in the sargo-specific DTS with the same value. This makes sense since the 3a XL has a different battery capacity (3700 mAh vs 3000 mAh).

> +		framebuffer: framebuffer@9c000000 {
> +			compatible = "simple-framebuffer";
> +			/* dimensions and size are in specific device trees */
> +			format = "a8r8g8b8";
> +			status = "disabled";
>  		};

The framebuffer is disabled in the common include and re-enabled with device-specific dimensions in each board DTS. However, `simple-framebuffer` nodes without `reg`, `width`, `height`, and `stride` properties are incomplete. Since the node is `status = "disabled"`, this is fine at runtime, but it may generate DT validation warnings. The `reg` property is also omitted from the common include but provided in the per-device overrides.

> +&rmi4_f12 {
> +	touchscreen-x-mm = <63>;
> +	touchscreen-y-mm = <127>;
> +};

The original sargo DTS had `touchscreen-x-mm = <62>`, but the new sargo DTS sets it to `<63>`. Is this an intentional correction, or a typo introduced during the refactoring? The commit message doesn't mention this change. If intentional, it would be worth noting in the commit message.

> -	panel: panel@0 {
> -		compatible = "samsung,s6e3fa7-ams559nk06";
> +	panel: panel@0 {
> +		/* compatible is provided in specific device trees */
>  		reg = <0>;

The panel node is left without a `compatible` and with `status = "disabled"` in the common include. This is correct -- the per-device DTS provides both the compatible and `status = "okay"`.

> -// SPDX-License-Identifier: GPL-2.0
> +// SPDX-License-Identifier: GPL-2.0-only

The SPDX license identifier changed from `GPL-2.0` to `GPL-2.0-only` in the new sargo DTS. While `GPL-2.0-only` is more precise, this is a license change that should probably be noted in the commit message or handled as a separate patch, as it changes the licensing terms.

---
Generated by Claude Code Patch Reviewer

Claude review: arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

[Claude Code Review Bot]

Patch Review

> +/*
> + * Device tree for Google Pixel 3a XL with the panel connected to the Samsung
> + * Display Controller.

This comment says "Samsung Display Controller" but the file is `sdm670-google-bonito-tianma.dts` and uses the `novatek,nt37700f` compatible. The cover letter mentions this was addressed in v2 ("mention the sdc panel"), but the comment still describes the wrong panel variant. This should say something like "with the Tianma panel" rather than "Samsung Display Controller."

> +	compatible = "google,bonito-tianma", "google,bonito", "qcom,sdm670";

Matches the binding added in patch 1. Correct.

> +&battery {
> +	charge-full-design-microamp-hours = <3700000>;
> +};

3700 mAh for the XL variant vs 3000 mAh for the standard 3a. Reasonable.

> +&panel {
> +	compatible = "novatek,nt37700f";
> +	status = "okay";
> +};

Uses the panel driver from patch 3. The `status = "okay"` overrides the `"disabled"` from the common include. Correct.

> +&rmi4_f12 {
> +	touchscreen-x-mm = <69>;
> +	touchscreen-y-mm = <137>;
> +};

Touchscreen dimensions match the panel physical size (69mm x 137mm) specified in the panel driver's `drm_display_mode`. Consistent.

The Makefile addition places the new dtb entry after `sdm670-google-sargo.dtb` but alphabetically `bonito` comes before `sargo`. Not a functional issue, but the Makefile entry could be placed in alphabetical order for consistency.

---
Generated by Claude Code Patch Reviewer

Claude review: Support for the Pixel 3a XL with the Tianma panel

[Claude Code Review Bot]

Overall Series Review

Subject: Support for the Pixel 3a XL with the Tianma panel
Author: Richard Acayan <mailingradian@gmail.com>
Patches: 6
Reviewed: 2026-03-10T11:42:22.690547

---

This is a well-structured v3 series adding Pixel 3a XL (codename "bonito") support with the Tianma/Novatek NT37700F panel variant. The approach of factoring the existing sargo (Pixel 3a) device tree into a common `.dtsi` and device-specific `.dts` files is the correct pattern. The panel driver is generated via `linux-mdss-dsi-panel-driver-generator` and uses modern multi-context DSI APIs. The series has already collected several review/ack tags from maintainers (Krzysztof Kozlowski, Konrad Dybcio, Dmitry Baryshkov, Yifei Zhan).

Overall this looks good to merge. I have a few observations, mostly minor.

---
Generated by Claude Code Patch Reviewer