[PATCH v2 0/2] ARM: tegra: document Tegra20 HDMI port

[PATCH v2 0/2] ARM: tegra: document Tegra20 HDMI port

[Svyatoslav Ryhel]

Document port which can be used in the HDMI to model it using OF
graph.

---
Changes in v2:
- fixed intendation
- adjusted port description
---

Svyatoslav Ryhel (2):
  dt-bindings: display: tegra: document Tegra20 HDMI port
  ARM: tegra: transformers: add connector node

 .../display/tegra/nvidia,tegra20-hdmi.yaml    | 13 ++++++++++--
 .../boot/dts/nvidia/tegra30-asus-tf600t.dts   | 21 +++++++++++++++++--
 2 files changed, 30 insertions(+), 4 deletions(-)

-- 
2.51.0

[PATCH v2 1/2] dt-bindings: display: tegra: document Tegra20 HDMI port

[Svyatoslav Ryhel]

Tegra HDMI can be modeled using an OF graph. Reflect this in the bindings.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../bindings/display/tegra/nvidia,tegra20-hdmi.yaml | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
index f77197e4869f..b4bf2662780b 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -82,6 +82,10 @@ properties:
     description: phandle of a display panel
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  port:
+    description: HDMI output port for connection to HDMI connector or bridge
+    $ref: /schemas/graph.yaml#/properties/port
+
   "#sound-dai-cells":
     const: 0
 
@@ -97,8 +101,13 @@ required:
   - reset-names
   - pll-supply
   - vdd-supply
-  - nvidia,ddc-i2c-bus
-  - nvidia,hpd-gpio
+
+anyOf:
+  - required:
+      - nvidia,ddc-i2c-bus
+      - nvidia,hpd-gpio
+  - required:
+      - port
 
 examples:
   - |
-- 
2.51.0

Claude review: dt-bindings: display: tegra: document Tegra20 HDMI port

[Claude Code Review Bot]

Patch Review

The binding change adds a `port` property and restructures the required properties to allow either the legacy approach or the OF graph approach.

> +  port:
> +    description: HDMI output port for connection to HDMI connector or bridge
> +    $ref: /schemas/graph.yaml#/properties/port

This is a clean addition. The reference to the graph port schema is correct, and since the existing binding has `additionalProperties: false`, the property must be listed here to be allowed.

> -  - nvidia,ddc-i2c-bus
> -  - nvidia,hpd-gpio
> +
> +anyOf:
> +  - required:
> +      - nvidia,ddc-i2c-bus
> +      - nvidia,hpd-gpio
> +  - required:
> +      - port

The `anyOf` logic is correct: at least one of the two groups must be satisfied. This preserves backward compatibility with existing DTS files that use the legacy properties. One thing to note is that `anyOf` also permits a node to have all three properties simultaneously (`nvidia,ddc-i2c-bus`, `nvidia,hpd-gpio`, and `port`). That may or may not be intentional -- if the driver doesn't handle having both the legacy properties and a port simultaneously, it might be worth considering `oneOf` instead. But this is a design choice rather than a bug, and having both present wouldn't violate the schema.

The commit message is accurate but brief. No other issues.

---
Generated by Claude Code Patch Reviewer

[PATCH v2 2/2] ARM: tegra: transformers: add connector node

[Svyatoslav Ryhel]

All ASUS Transformers have micro-HDMI connector directly available. After
Tegra HDMI got bridge/connector support, we should use connector framework
for proper HW description.

Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF201 T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../boot/dts/nvidia/tegra30-asus-tf600t.dts   | 21 +++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
index 1ed0536ae3fa..498780a96cf9 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -67,8 +67,11 @@ hdmi: hdmi@54280000 {
 			pll-supply = <&vdd_1v8_vio>;
 			vdd-supply = <&vdd_3v3_sys>;
 
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&connector_in>;
+				};
+			};
 		};
 
 		lcd: dsi@54300000 {
@@ -2302,6 +2305,20 @@ clk32k_in: clock-32k {
 		clock-output-names = "pmic-oscillator";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+
+		port {
+			connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
 	cpus {
 		cpu0: cpu@0 {
 			cpu-supply = <&vdd_cpu>;
-- 
2.51.0

Claude review: ARM: tegra: transformers: add connector node

[Claude Code Review Bot]

Patch Review

> -			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
> -			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
> +			port {
> +				hdmi_out: endpoint {
> +					remote-endpoint = <&connector_in>;
> +				};
> +			};

The legacy properties are removed and replaced with an OF graph port endpoint. This satisfies the `port` clause in the `anyOf` from patch 1.

> +	connector {
> +		compatible = "hdmi-connector";
> +		type = "d";
> +
> +		hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
> +		ddc-i2c-bus = <&hdmi_ddc>;
> +
> +		port {
> +			connector_in: endpoint {
> +				remote-endpoint = <&hdmi_out>;
> +			};
> +		};
> +	};

The connector node looks correct. Type `"d"` is micro HDMI, which matches the cover letter's description of a micro-HDMI connector. The `hpd-gpios` and `ddc-i2c-bus` properties are both valid per the `hdmi-connector` binding, and the HPD GPIO specification is carried over from its previous location in the HDMI node. The OF graph endpoints are properly cross-referenced.

Minor observation: the subject says "transformers" (plural) but this patch only modifies `tegra30-asus-tf600t.dts`. The Tested-by tags reference three different Transformer models (TF600T, TF101, TF201), suggesting similar DTS changes may come for those boards in a separate series. The subject could be more precise (e.g., "tegra: tf600t: add connector node"), but this is a trivial nit.

No correctness issues found in this patch.

---
Generated by Claude Code Patch Reviewer

Claude review: ARM: tegra: document Tegra20 HDMI port

[Claude Code Review Bot]

Overall Series Review

Subject: ARM: tegra: document Tegra20 HDMI port
Author: Svyatoslav Ryhel <clamor95@gmail.com>
Patches: 3
Reviewed: 2026-02-24T10:34:48.093002

---

This is a straightforward two-patch device tree series that adds OF graph port support to the Tegra HDMI binding and converts the ASUS TF600T DTS to use an explicit `hdmi-connector` node instead of inline HPD/DDC properties. The approach is standard for modeling HDMI outputs through the connector framework, moving the hotplug detect GPIO and DDC I2C bus from the HDMI encoder node to a separate connector node connected via OF graph endpoints.

The binding change in patch 1 uses `anyOf` to preserve backward compatibility -- existing DTS files with `nvidia,hpd-gpio` and `nvidia,ddc-i2c-bus` remain valid, while new DTS files can use the `port` property instead. The DTS change in patch 2 correctly uses the `hdmi-connector` binding with type `"d"` (micro HDMI) and valid properties.

There are a couple of minor observations but no significant correctness issues in the series.

---
Generated by Claude Code Patch Reviewer

[PATCH v1 0/2] ARM: tegra: document Tegra20 HDMI port

[Svyatoslav Ryhel]

Document port which can be used in the HDMI to model it using OF
graph.

Svyatoslav Ryhel (2):
  dt-bindings: display: tegra: document Tegra20 HDMI port
  ARM: tegra: transformers: add connector node

 .../display/tegra/nvidia,tegra20-hdmi.yaml    | 13 +++++++++--
 .../tegra20-asus-transformer-common.dtsi      | 22 ++++++++++++++++---
 .../boot/dts/nvidia/tegra30-asus-tf600t.dts   | 21 ++++++++++++++++--
 .../tegra30-asus-transformer-common.dtsi      | 21 ++++++++++++++++--
 4 files changed, 68 insertions(+), 9 deletions(-)

-- 
2.51.0

Claude review: ARM: tegra: document Tegra20 HDMI port

[Claude Code Review Bot]

Overall Series Review

Subject: ARM: tegra: document Tegra20 HDMI port
Author: Svyatoslav Ryhel <clamor95@gmail.com>
Patches: 5
Reviewed: 2026-02-11T16:27:52.817707

---

This 2-patch series adds OF graph support to the Tegra20/30 HDMI bindings and migrates ASUS Transformer devices to use the connector framework. The series has one critical issue that blocks merging:

**BLOCKING ISSUES:**
1. **YAML indentation errors** in patch 1/2 - The dt-binding bot found yamllint warnings about incorrect indentation (lines 107, 110). This must be fixed before the binding can be accepted.

**TECHNICAL ASSESSMENT:**
- The approach is sound: moving from deprecated `nvidia,ddc-i2c-bus` and `nvidia,hpd-gpio` properties to the modern OF graph + connector framework pattern
- The binding change correctly makes the properties mutually exclusive via `anyOf`
- DTS changes are mechanical and consistent across all three device trees
- Testing coverage is good with Tested-by tags from multiple devices

**FEEDBACK FROM MAINTAINERS:**
- Rob Herring's automated bot caught the indentation issue
- Rob Herring requested a clarification on the port description (should describe the block itself, not what it connects to)

**RECOMMENDATION:** Fix the indentation and description issues in v2, then the series should be ready for merge.

---

---
Generated by Claude Code Patch Reviewer