From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claude Code Review Bot To: dri-devel-reviews@example.com Subject: Claude review: drm/bridge: lt9211: Add drive-strength-microamp DT property Date: Sat, 16 May 2026 13:11:28 +1000 Message-ID: In-Reply-To: <20260512164609.3390700-1-bstruempfel@data-modul.com> References: <20260512164609.3390700-1-bstruempfel@data-modul.com> X-Mailer: Claude Code Patch Reviewer Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Overall Series Review Subject: drm/bridge: lt9211: Add drive-strength-microamp DT property Author: Boerge Struempfel Patches: 7 Reviewed: 2026-05-16T13:11:28.036918 --- This is a clean, well-structured 2-patch series adding a configurable LVDS TX drive-strength property to the LT9211 bridge driver. The binding and driver changes are split correctly across the two patches. The default value (`0x8` = 25 uA) preserves backward compatibility. The code is correct and consistent with existing patterns in the driver. One concern worth flagging: the values 12-36 in `drive-strength-microamp` seem implausibly low for LVDS output drive current (standard LVDS specifies ~3.5 mA nominal differential current). These may represent an internal bias/reference current rather than the actual output current, or there may be a units error (milliamps vs. microamps). This should be verified against the LT9211 datasheet. Overall: **Looks good with minor comments.** --- --- Generated by Claude Code Patch Reviewer