From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claude Code Review Bot To: dri-devel-reviews@example.com Subject: Claude review: dt-bindings: bridge: Add Lontium LT7911EXC eDP to MIPI DSI bridge Date: Tue, 05 May 2026 10:47:37 +1000 Message-ID: In-Reply-To: <20260430094612.3408174-2-syyang@lontium.com> References: <20260430094612.3408174-1-syyang@lontium.com> <20260430094612.3408174-2-syyang@lontium.com> X-Mailer: Claude Code Patch Reviewer Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Patch Review This patch is in decent shape. Minor observations: - **Missing `description` property at the top level**: The schema has `titl= e` but no `description`. DT binding convention recommends a `description` b= lock explaining the chip's capabilities (eDP 1.4 receiver, single/dual MIPI= DSI output lanes, supported resolutions, etc.). - **No `data-lanes` property for DSI output**: Since this chip supports "si= ngle/dual port MIPI" output, the binding should describe how the number of = DSI lanes and ports is configured. Other MIPI DSI bridge bindings (e.g., `l= ontium,lt9611`) include `data-lanes` on the DSI port endpoints. - **Commit message grammar**: "Receiver eDP1.4 and output signal/dual port = mipi" =E2=80=94 should be "receives eDP 1.4 input and outputs single/dual p= ort MIPI DSI." - **Example looks correct** =E2=80=94 uses `GPIO_ACTIVE_LOW` for reset (mat= ching the active-low convention), proper port definitions, correct I2C addr= ess. Overall this patch is close but should add DSI lane configuration propertie= s. --- --- Generated by Claude Code Patch Reviewer