From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claude Code Review Bot To: dri-devel-reviews@example.com Subject: Claude review: arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Date: Mon, 25 May 2026 18:25:03 +1000 Message-ID: In-Reply-To: <20260522161105.277519-24-ivitro@gmail.com> References: <20260522161105.277519-13-ivitro@gmail.com> <20260522161105.277519-24-ivitro@gmail.com> X-Mailer: Claude Code Patch Reviewer Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit MIME-Version: 1.0 Patch Review This overlay is very similar to patch 2 (native LVDS) but targets the Mezzanine expansion board rather than the Mallow carrier. Key differences: - Backlight enable uses `mcu_gpio0 4` (Verdin GPIO_4 / SODIMM 212) instead of `main_gpio0 34` (Verdin I2S_2_D_OUT / SODIMM 46). This matches the Mezzanine board's different LVDS backlight wiring. - Touch interrupt/reset use `mcu_gpio0` pins 3 and 2 (Verdin GPIO_3/GPIO_2) instead of `main_gpio0` pins 37 and 33. Again matches the Mezzanine's different touch routing. - The backlight node does **not** have `pinctrl-names`/`pinctrl-0` properties, unlike patch 2. This is correct because the `mcu_gpio0` pins don't require explicit pinmux configuration on AM62 (they default to GPIO function). - The touchscreen node also lacks `pinctrl-names`/`pinctrl-0` for the same reason. Correct. **No blocking issues.** --- Generated by Claude Code Patch Reviewer