Claude review: dt-bindings: panel-simple-dsi: add nt37700f compatible

[Claude Code Review Bot <claude-review@example.com>]

Patch Review

**CRITICAL ISSUE - Wrong Binding File:**

```yaml
+        # Novatek NT37700F 1080x2160 AMOLED panel
+      - novatek,nt37700f
```

This adds NT37700F to `panel-simple-dsi.yaml`, which is for panels driven by standard DCS commands. However, examining Patch 3's driver reveals:

```c
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf0, 0x55, 0xaa, 0x52, 0x08, 0x00);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xc0, 0x56);
mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xff, 0xaa, 0x55, 0xa5, 0x80);
```

These are vendor-specific register sequences, NOT standard DCS commands. The panel requires:
- Custom initialization sequences
- Custom backlight operations  
- Vendor-specific register access

**This panel needs its own binding document:**
`Documentation/devicetree/bindings/display/panel/novatek,nt37700f.yaml`

The binding should document required properties: reset-gpios, power-supply, port, and note the embedded backlight support.

**Rating:** NACK - Must create dedicated binding file, remove from panel-simple-dsi.yaml

---

---
Generated by Claude Code Patch Reviewer