* [PATCH v2 0/2] drm/imagination: Improve power off sequence
@ 2026-03-13 6:38 Brajesh Gupta
2026-03-13 6:38 ` [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config Brajesh Gupta
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Brajesh Gupta @ 2026-03-13 6:38 UTC (permalink / raw)
To: Frank Binns, Matt Coster, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Simona Vetter, Alessio Belle,
Alexandru Dadu
Cc: dri-devel, linux-kernel, Brajesh Gupta
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
---
Changes in v2:
- Patch updates as per feedback
- Link to v1: https://lore.kernel.org/r/20260305-b4-staging-layout_mars_base-v1-0-09831fa17cef@imgtec.com
---
Brajesh Gupta (2):
drm/imagination: Improve firmware power off for layout_mars config
drm/imagination: Skip 2nd thread DM association for non META Firmware
drivers/gpu/drm/imagination/pvr_fw_startstop.c | 100 ++++++++++++++++---------
1 file changed, 66 insertions(+), 34 deletions(-)
---
base-commit: 68b271a3a94cfd6c7695a96b6398b52feb89e2c2
change-id: 20260304-b4-staging-layout_mars_base-dfbbf1a53b3c
Best regards,
--
Brajesh Gupta <brajesh.gupta@imgtec.com>
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config 2026-03-13 6:38 [PATCH v2 0/2] drm/imagination: Improve power off sequence Brajesh Gupta @ 2026-03-13 6:38 ` Brajesh Gupta 2026-03-13 21:22 ` Claude review: " Claude Code Review Bot 2026-03-13 6:38 ` [PATCH v2 2/2] drm/imagination: Skip 2nd thread DM association for non META Firmware Brajesh Gupta 2026-03-13 21:22 ` Claude review: drm/imagination: Improve power off sequence Claude Code Review Bot 2 siblings, 1 reply; 6+ messages in thread From: Brajesh Gupta @ 2026-03-13 6:38 UTC (permalink / raw) To: Frank Binns, Matt Coster, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Alessio Belle, Alexandru Dadu Cc: dri-devel, linux-kernel, Brajesh Gupta In layout_mars HW config, Firmware MCU moved from Sidekick to new Mars domain so Firmware takes care of powering down Sidekick/Jones and SLC. Skip checks for those from kernel and check idle bits for Firmware MCU and system arbiter excluding SOCIF. Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com> --- drivers/gpu/drm/imagination/pvr_fw_startstop.c | 85 +++++++++++++++++--------- 1 file changed, 57 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_fw_startstop.c b/drivers/gpu/drm/imagination/pvr_fw_startstop.c index dcbb9903e791..e47224ac0547 100644 --- a/drivers/gpu/drm/imagination/pvr_fw_startstop.c +++ b/drivers/gpu/drm/imagination/pvr_fw_startstop.c @@ -209,18 +209,32 @@ pvr_fw_stop(struct pvr_device *pvr_dev) ROGUE_CR_SIDEKICK_IDLE_SOCIF_EN | ROGUE_CR_SIDEKICK_IDLE_HOSTIF_EN); bool skip_garten_idle = false; + u64 layout_mars_value = 0; + bool layout_mars = false; + bool meta_fw = pvr_dev->fw_dev.processor_type == PVR_FW_PROCESSOR_TYPE_META; u32 reg_value; int err; + if (PVR_FEATURE_VALUE(pvr_dev, layout_mars, &layout_mars_value) == 0) + layout_mars = layout_mars_value > 0; + /* - * Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper. - * For cores with the LAYOUT_MARS feature, SIDEKICK would have been + * For cores with the LAYOUT_MARS feature, SIDEKICK and SLC would have been * powered down by the FW. */ - err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, sidekick_idle_mask, - sidekick_idle_mask, POLL_TIMEOUT_USEC); - if (err) - return err; + if (!layout_mars) { + /* Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper. */ + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, sidekick_idle_mask, + sidekick_idle_mask, POLL_TIMEOUT_USEC); + if (err) + return err; + + /* Wait for SLC to signal IDLE. */ + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SLC_IDLE, ROGUE_CR_SLC_IDLE_MASKFULL, + ROGUE_CR_SLC_IDLE_MASKFULL, POLL_TIMEOUT_USEC); + if (err) + return err; + } /* Unset MTS DM association with threads. */ pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_INTCTX_THREAD0_DM_ASSOC, @@ -270,27 +284,25 @@ pvr_fw_stop(struct pvr_device *pvr_dev) return err; /* - * Wait for SLC to signal IDLE. - * For cores with the LAYOUT_MARS feature, SLC would have been powered - * down by the FW. + * For cores with the LAYOUT_MARS feature, SIDEKICK and SLC would have been + * powered down by the FW. */ - err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SLC_IDLE, - ROGUE_CR_SLC_IDLE_MASKFULL, - ROGUE_CR_SLC_IDLE_MASKFULL, POLL_TIMEOUT_USEC); - if (err) - return err; + if (!layout_mars) { + /* Wait for SLC to signal IDLE. */ + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SLC_IDLE, + ROGUE_CR_SLC_IDLE_MASKFULL, + ROGUE_CR_SLC_IDLE_MASKFULL, POLL_TIMEOUT_USEC); + if (err) + return err; - /* - * Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper. - * For cores with the LAYOUT_MARS feature, SIDEKICK would have been powered - * down by the FW. - */ - err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, sidekick_idle_mask, - sidekick_idle_mask, POLL_TIMEOUT_USEC); - if (err) - return err; + /* Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper. */ + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, sidekick_idle_mask, + sidekick_idle_mask, POLL_TIMEOUT_USEC); + if (err) + return err; + } - if (pvr_dev->fw_dev.processor_type == PVR_FW_PROCESSOR_TYPE_META) { + if (meta_fw) { err = pvr_meta_cr_read32(pvr_dev, META_CR_TxVECINT_BHALT, ®_value); if (err) return err; @@ -304,11 +316,28 @@ pvr_fw_stop(struct pvr_device *pvr_dev) skip_garten_idle = true; } - if (!skip_garten_idle) { - err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, - ROGUE_CR_SIDEKICK_IDLE_GARTEN_EN, - ROGUE_CR_SIDEKICK_IDLE_GARTEN_EN, + if (meta_fw || !layout_mars) { + if (!skip_garten_idle) { + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, + ROGUE_CR_SIDEKICK_IDLE_GARTEN_EN, + ROGUE_CR_SIDEKICK_IDLE_GARTEN_EN, + POLL_TIMEOUT_USEC); + if (err) + return err; + } + } else { + /* + * As FW core has been moved from SIDEKICK to the new MARS domain, checking + * idle bits for CPU & System Arbiter excluding SOCIF which will never be + * idle if Host polling on this register + */ + err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_MARS_IDLE, + ROGUE_CR_MARS_IDLE_CPU_EN | + ROGUE_CR_MARS_IDLE_MH_SYSARB0_EN, + ROGUE_CR_MARS_IDLE_CPU_EN | + ROGUE_CR_MARS_IDLE_MH_SYSARB0_EN, POLL_TIMEOUT_USEC); + if (err) return err; } -- 2.43.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Claude review: drm/imagination: Improve firmware power off for layout_mars config 2026-03-13 6:38 ` [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config Brajesh Gupta @ 2026-03-13 21:22 ` Claude Code Review Bot 0 siblings, 0 replies; 6+ messages in thread From: Claude Code Review Bot @ 2026-03-13 21:22 UTC (permalink / raw) To: dri-devel-reviews Patch Review **Logic and correctness:** The core logic change is correct — when `layout_mars` is true, Sidekick and SLC have been powered down by the firmware, so the kernel should not poll their idle registers. Instead, at the end, the MARS_IDLE register is polled for CPU and system arbiter (excluding SOCIF). **Variable declaration ordering (minor style):** ```c u64 layout_mars_value = 0; bool layout_mars = false; bool meta_fw = pvr_dev->fw_dev.processor_type == PVR_FW_PROCESSOR_TYPE_META; u32 reg_value; ``` The kernel coding style prefers reverse-Christmas-tree ordering for variable declarations (longest line first). `meta_fw` is the longest declaration but appears after the shorter ones. This is a minor nit. **Early SLC idle check addition:** The original code had the SLC idle check only after the "Extra Idle checks" block (BIF_STATUS_MMU etc.). This patch adds an *additional* SLC idle check before the MTS DM association unset: ```c if (!layout_mars) { /* Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper. */ err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SIDEKICK_IDLE, sidekick_idle_mask, sidekick_idle_mask, POLL_TIMEOUT_USEC); if (err) return err; /* Wait for SLC to signal IDLE. */ err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SLC_IDLE, ROGUE_CR_SLC_IDLE_MASKFULL, ROGUE_CR_SLC_IDLE_MASKFULL, POLL_TIMEOUT_USEC); if (err) return err; } ``` The original code only checked Sidekick idle before MTS teardown, and checked SLC idle *after* the extra idle checks. Now both Sidekick and SLC are checked in *both* locations for non-MARS configurations. The commit message doesn't explain why an additional early SLC idle check is needed. This should be clarified — is it a pre-existing bug fix or a new requirement? It's a semantic change that goes beyond the stated goal of skipping checks for LAYOUT_MARS. **Alignment issue:** ```c err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_SLC_IDLE, ROGUE_CR_SLC_IDLE_MASKFULL, ROGUE_CR_SLC_IDLE_MASKFULL, POLL_TIMEOUT_USEC); ``` There's a stray extra space before `ROGUE_CR_SLC_IDLE_MASKFULL` on the continuation line (one space too many for alignment). Compare with the second occurrence which aligns correctly with tabs only. **Comment style (minor):** ```c /* * As FW core has been moved from SIDEKICK to the new MARS domain, checking * idle bits for CPU & System Arbiter excluding SOCIF which will never be * idle if Host polling on this register */ ``` Missing period at end of comment. Kernel style expects properly punctuated multi-line comments. **Garten idle condition:** ```c if (meta_fw || !layout_mars) { if (!skip_garten_idle) { ``` This is correct: for META firmware, always check the Garten wrapper idle via SIDEKICK_IDLE. For non-META, non-MARS, also check it. For non-META MARS, use the MARS_IDLE register instead. The logic is sound, but the `else` branch (MARS idle) is only reachable when `!meta_fw && layout_mars`, which is the RISC-V MARS case. A brief comment clarifying this would help readability. **Blank line before error check:** ```c POLL_TIMEOUT_USEC); if (err) return err; ``` There's a blank line between the function call and the `if (err)` check in the MARS_IDLE polling block. This is inconsistent with every other poll+check pattern in the function which has no blank line. --- Generated by Claude Code Patch Reviewer ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] drm/imagination: Skip 2nd thread DM association for non META Firmware 2026-03-13 6:38 [PATCH v2 0/2] drm/imagination: Improve power off sequence Brajesh Gupta 2026-03-13 6:38 ` [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config Brajesh Gupta @ 2026-03-13 6:38 ` Brajesh Gupta 2026-03-13 21:22 ` Claude review: " Claude Code Review Bot 2026-03-13 21:22 ` Claude review: drm/imagination: Improve power off sequence Claude Code Review Bot 2 siblings, 1 reply; 6+ messages in thread From: Brajesh Gupta @ 2026-03-13 6:38 UTC (permalink / raw) To: Frank Binns, Matt Coster, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie, Simona Vetter, Alessio Belle, Alexandru Dadu Cc: dri-devel, linux-kernel, Brajesh Gupta Only a META firmware can have two threads. Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com> --- drivers/gpu/drm/imagination/pvr_fw_startstop.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_fw_startstop.c b/drivers/gpu/drm/imagination/pvr_fw_startstop.c index e47224ac0547..2f90bc1bf084 100644 --- a/drivers/gpu/drm/imagination/pvr_fw_startstop.c +++ b/drivers/gpu/drm/imagination/pvr_fw_startstop.c @@ -243,12 +243,15 @@ pvr_fw_stop(struct pvr_device *pvr_dev) pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_BGCTX_THREAD0_DM_ASSOC, ROGUE_CR_MTS_BGCTX_THREAD0_DM_ASSOC_MASKFULL & ROGUE_CR_MTS_BGCTX_THREAD0_DM_ASSOC_DM_ASSOC_CLRMSK); - pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC, - ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_MASKFULL & - ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); - pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC, - ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_MASKFULL & - ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); + + if (meta_fw) { + pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC, + ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_MASKFULL & + ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); + pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC, + ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_MASKFULL & + ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); + } /* Extra Idle checks. */ err = pvr_cr_poll_reg32(pvr_dev, ROGUE_CR_BIF_STATUS_MMU, 0, -- 2.43.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Claude review: drm/imagination: Skip 2nd thread DM association for non META Firmware 2026-03-13 6:38 ` [PATCH v2 2/2] drm/imagination: Skip 2nd thread DM association for non META Firmware Brajesh Gupta @ 2026-03-13 21:22 ` Claude Code Review Bot 0 siblings, 0 replies; 6+ messages in thread From: Claude Code Review Bot @ 2026-03-13 21:22 UTC (permalink / raw) To: dri-devel-reviews Patch Review **Logic:** Correct. Only META firmware processors have two threads, so the Thread1 DM association writes should be skipped for RISC-V (and any other non-META) firmware. The `meta_fw` variable was already introduced in patch 1, so this uses it cleanly. **Indentation issue:** ```c if (meta_fw) { pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC, ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_MASKFULL & ROGUE_CR_MTS_INTCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); pvr_cr_write32(pvr_dev, ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC, ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_MASKFULL & ROGUE_CR_MTS_BGCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK); } ``` The continuation lines for the `pvr_cr_write32` arguments are indented with spaces to align to column position, but they don't match the surrounding code's alignment style. Before this patch, these same lines used tab+spaces to align the arguments under the opening parenthesis. After the patch, the arguments are indented less (3 tabs + 3 spaces) instead of matching the opening paren position. Compare with the Thread0 writes just above which use proper alignment. This should be fixed for consistency. **Overall:** Both patches are straightforward and correct in intent. The main actionable items are: 1. Explain (in commit message or comment) why the early SLC idle check was added for non-MARS configs in patch 1. 2. Fix the alignment/indentation issues in both patches. 3. Fix the missing period in the multi-line comment and the stray blank line in patch 1. --- Generated by Claude Code Patch Reviewer ^ permalink raw reply [flat|nested] 6+ messages in thread
* Claude review: drm/imagination: Improve power off sequence 2026-03-13 6:38 [PATCH v2 0/2] drm/imagination: Improve power off sequence Brajesh Gupta 2026-03-13 6:38 ` [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config Brajesh Gupta 2026-03-13 6:38 ` [PATCH v2 2/2] drm/imagination: Skip 2nd thread DM association for non META Firmware Brajesh Gupta @ 2026-03-13 21:22 ` Claude Code Review Bot 2 siblings, 0 replies; 6+ messages in thread From: Claude Code Review Bot @ 2026-03-13 21:22 UTC (permalink / raw) To: dri-devel-reviews Overall Series Review Subject: drm/imagination: Improve power off sequence Author: Brajesh Gupta <brajesh.gupta@imgtec.com> Patches: 3 Reviewed: 2026-03-14T07:22:39.772730 --- This is a 2-patch series for the `drm/imagination` (PowerVR) driver that improves the firmware power-off sequence for devices with the `LAYOUT_MARS` hardware configuration. In LAYOUT_MARS, the firmware MCU has moved from the Sidekick domain to a new Mars domain, so the kernel must skip Sidekick/SLC idle polling (the firmware handles those) and instead poll the MARS_IDLE register. The second patch skips the second-thread DM association write for non-META firmware processors (which only have one thread). The changes are logically sound and well-structured. There are a few minor issues worth flagging. --- Generated by Claude Code Patch Reviewer ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2026-03-13 21:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-03-13 6:38 [PATCH v2 0/2] drm/imagination: Improve power off sequence Brajesh Gupta 2026-03-13 6:38 ` [PATCH v2 1/2] drm/imagination: Improve firmware power off for layout_mars config Brajesh Gupta 2026-03-13 21:22 ` Claude review: " Claude Code Review Bot 2026-03-13 6:38 ` [PATCH v2 2/2] drm/imagination: Skip 2nd thread DM association for non META Firmware Brajesh Gupta 2026-03-13 21:22 ` Claude review: " Claude Code Review Bot 2026-03-13 21:22 ` Claude review: drm/imagination: Improve power off sequence Claude Code Review Bot
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox