[PATCH v3 0/4] Add DSI display support for SC8280XP

[PATCH v3 0/4] Add DSI display support for SC8280XP

[Pengyu Luo]

Add DSI display support for SC8280XP.
---
Changes in v3:
- add the missing refgen supply to DSI (Dmitry)
- Link to v2: https://lore.kernel.org/linux-arm-msm/20260228101907.18043-1-mitltlatltl@gmail.com/

Changes in v2:
- fallback to SA8775P compatible (Krzysztof, Konrad, Dmitry)
- fix DT styles[a newline between property and subnode, property order] (Konrad)
- use one dsi_opp_table and all dsi controllers reference it (Konrad)
- resize dsi_pll region to 0x280 (Konrad)
- update commit message
- Link to v1: https://lore.kernel.org/linux-arm-msm/20260225054525.6803-1-mitltlatltl@gmail.com

Pengyu Luo (4):
  dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
  dt-bindings: display/msm: dsi-controller-main: Add SC8280XP
  dt-bindings: display: msm: Document DSI controller and DSI PHY on
    SC8280XP
  arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

 .../display/msm/dsi-controller-main.yaml      |   1 +
 .../bindings/display/msm/dsi-phy-7nm.yaml     |   1 +
 .../display/msm/qcom,sc8280xp-mdss.yaml       |  30 ++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 404 +++++++++++++++++-
 4 files changed, 428 insertions(+), 8 deletions(-)

-- 
2.53.0

[PATCH v3 1/4] dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP

[Pengyu Luo]

Since SC8280XP and SA8775P have the same values for the REVISION_ID
registers, then we fallback to SA8775P compatible.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 9a9a6c4ab..532f37182 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -32,6 +32,7 @@ properties:
       - items:
           - enum:
               - qcom,qcs8300-dsi-phy-5nm
+              - qcom,sc8280xp-dsi-phy-5nm
           - const: qcom,sa8775p-dsi-phy-5nm
 
   reg:
-- 
2.53.0

Re: [PATCH v3 1/4] dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP

[Krzysztof Kozlowski]

On Sat, Feb 28, 2026 at 10:17:12PM +0800, Pengyu Luo wrote:
> Since SC8280XP and SA8775P have the same values for the REVISION_ID
> registers, then we fallback to SA8775P compatible.
> 
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> ---
>  Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Claude review: dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP

[Claude Code Review Bot]

Patch Review

**Status: Looks good.**

Simple one-line addition placing `qcom,sc8280xp-dsi-phy-5nm` alongside the existing `qcom,qcs8300-dsi-phy-5nm` as a fallback to `qcom,sa8775p-dsi-phy-5nm`. The commit message correctly explains that SC8280XP and SA8775P share the same REVISION_ID register values.

```diff
+              - qcom,sc8280xp-dsi-phy-5nm
           - const: qcom,sa8775p-dsi-phy-5nm
```

No issues.

---

---
Generated by Claude Code Patch Reviewer

[PATCH v3 2/4] dt-bindings: display/msm: dsi-controller-main: Add SC8280XP

[Pengyu Luo]

Since SC8280XP and SA8775P have the same DSI version(2.5.1), then we
fallback to SA8775P compatible.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 .../devicetree/bindings/display/msm/dsi-controller-main.yaml     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index eb6d38dab..617dd110d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -49,6 +49,7 @@ properties:
       - items:
           - enum:
               - qcom,qcs8300-dsi-ctrl
+              - qcom,sc8280xp-dsi-ctrl
           - const: qcom,sa8775p-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
       - enum:
-- 
2.53.0

Re: [PATCH v3 2/4] dt-bindings: display/msm: dsi-controller-main: Add SC8280XP

[Krzysztof Kozlowski]

On Sat, Feb 28, 2026 at 10:17:13PM +0800, Pengyu Luo wrote:
> Since SC8280XP and SA8775P have the same DSI version(2.5.1), then we
> fallback to SA8775P compatible.
> 
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> ---
>  .../devicetree/bindings/display/msm/dsi-controller-main.yaml     | 1 +
>  1 file changed, 1 insertion(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Claude review: dt-bindings: display/msm: dsi-controller-main: Add SC8280XP

[Claude Code Review Bot]

Patch Review

**Status: Looks good.**

Same pattern as patch 1, adding `qcom,sc8280xp-dsi-ctrl` as a fallback to `qcom,sa8775p-dsi-ctrl`. Commit message notes matching DSI version (2.5.1).

```diff
+              - qcom,sc8280xp-dsi-ctrl
           - const: qcom,sa8775p-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
```

No issues.

---

---
Generated by Claude Code Patch Reviewer

[PATCH v3 3/4] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Pengyu Luo]

Document DSI controller and DSI phy on SC8280XP platform.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 .../display/msm/qcom,sc8280xp-mdss.yaml       | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
index af79406e1..a710cc84e 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -50,6 +50,22 @@ patternProperties:
           - qcom,sc8280xp-dp
           - qcom,sc8280xp-edp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-phy-5nm
+
 unevaluatedProperties: false
 
 examples:
@@ -129,6 +145,20 @@ examples:
                     };
                 };
 
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
+
                 port@4 {
                     reg = <4>;
                     endpoint {
-- 
2.53.0

Re: [PATCH v3 3/4] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Krzysztof Kozlowski]

On Sat, Feb 28, 2026 at 10:17:14PM +0800, Pengyu Luo wrote:
> Document DSI controller and DSI phy on SC8280XP platform.
> 
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> ---
>  .../display/msm/qcom,sc8280xp-mdss.yaml       | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Claude review: dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Claude Code Review Bot]

Patch Review

**Status: Looks good.**

Adds `patternProperties` entries for DSI controller and PHY nodes in the SC8280XP MDSS binding schema, plus example port entries for INTF1 and INTF2 endpoints connecting to DSI0 and DSI1. The schema additions are straightforward and follow existing patterns.

```yaml
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
```

No issues.

---

---
Generated by Claude Code Patch Reviewer

[PATCH v3 4/4] arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

[Pengyu Luo]

The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
utilizing the same register layouts and clock structures.

However, DSI won't work properly for now until we submit dispcc fixes.
And some DSC enabled panels require DPU timing calculation fixes too.
(hdisplay / width timing round errors cause the fifo error)

Co-developed-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 404 ++++++++++++++++++++++++-
 1 file changed, 396 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 706eb1309..1599d698b 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -4652,13 +4653,31 @@ ports {
 
 					port@0 {
 						reg = <0>;
+
 						mdss0_intf0_out: endpoint {
 							remote-endpoint = <&mdss0_dp0_in>;
 						};
 					};
 
+					port@1 {
+						reg = <1>;
+
+						mdss0_intf1_out: endpoint {
+							remote-endpoint = <&mdss0_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						mdss0_intf2_out: endpoint {
+							remote-endpoint = <&mdss0_dsi1_in>;
+						};
+					};
+
 					port@4 {
 						reg = <4>;
+
 						mdss0_intf4_out: endpoint {
 							remote-endpoint = <&mdss0_dp1_in>;
 						};
@@ -4666,6 +4685,7 @@ mdss0_intf4_out: endpoint {
 
 					port@5 {
 						reg = <5>;
+
 						mdss0_intf5_out: endpoint {
 							remote-endpoint = <&mdss0_dp3_in>;
 						};
@@ -4673,6 +4693,7 @@ mdss0_intf5_out: endpoint {
 
 					port@6 {
 						reg = <6>;
+
 						mdss0_intf6_out: endpoint {
 							remote-endpoint = <&mdss0_dp2_in>;
 						};
@@ -4791,6 +4812,189 @@ opp-810000000 {
 				};
 			};
 
+			mdss0_dsi0: dsi@ae94000 {
+				compatible = "qcom,sc8280xp-dsi-ctrl",
+					     "qcom,sa8775p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <4>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				phys = <&mdss0_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi0_in: endpoint {
+							remote-endpoint = <&mdss0_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss0_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sc8280xp-dsi-phy-5nm"
+					     "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss0_dsi1: dsi@ae96000 {
+				compatible = "qcom,sc8280xp-dsi-ctrl",
+					     "qcom,sa8775p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <5>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				phys = <&mdss0_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dsi1_in: endpoint {
+							remote-endpoint = <&mdss0_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss0_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sc8280xp-dsi-phy-5nm"
+					     "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
 			mdss0_dp1: displayport-controller@ae98000 {
 				compatible = "qcom,sc8280xp-dp";
 				reg = <0 0xae98000 0 0x200>,
@@ -5080,10 +5284,10 @@ dispcc0: clock-controller@af00000 {
 				 <&mdss0_dp2_phy 1>,
 				 <&mdss0_dp3_phy 0>,
 				 <&mdss0_dp3_phy 1>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss0_dsi1_phy DSI_PIXEL_PLL_CLK>;
 			power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 			#clock-cells = <1>;
@@ -6011,13 +6215,31 @@ ports {
 
 					port@0 {
 						reg = <0>;
+
 						mdss1_intf0_out: endpoint {
 							remote-endpoint = <&mdss1_dp0_in>;
 						};
 					};
 
+					port@1 {
+						reg = <1>;
+
+						mdss1_intf1_out: endpoint {
+							remote-endpoint = <&mdss1_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						mdss1_intf2_out: endpoint {
+							remote-endpoint = <&mdss1_dsi1_in>;
+						};
+					};
+
 					port@4 {
 						reg = <4>;
+
 						mdss1_intf4_out: endpoint {
 							remote-endpoint = <&mdss1_dp1_in>;
 						};
@@ -6025,6 +6247,7 @@ mdss1_intf4_out: endpoint {
 
 					port@5 {
 						reg = <5>;
+
 						mdss1_intf5_out: endpoint {
 							remote-endpoint = <&mdss1_dp3_in>;
 						};
@@ -6032,6 +6255,7 @@ mdss1_intf5_out: endpoint {
 
 					port@6 {
 						reg = <6>;
+
 						mdss1_intf6_out: endpoint {
 							remote-endpoint = <&mdss1_dp2_in>;
 						};
@@ -6147,6 +6371,170 @@ opp-810000000 {
 				};
 			};
 
+			mdss1_dsi0: dsi@22094000 {
+				compatible = "qcom,sc8280xp-dsi-ctrl",
+					     "qcom,sa8775p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x22094000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <4>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss1_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				phys = <&mdss1_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dsi0_in: endpoint {
+							remote-endpoint = <&mdss1_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss1_dsi0_phy: phy@22094400 {
+				compatible = "qcom,sc8280xp-dsi-phy-5nm"
+					     "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0 0x22094400 0 0x200>,
+				      <0 0x22094600 0 0x280>,
+				      <0 0x22094900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss1_dsi1: dsi@22096000 {
+				compatible = "qcom,sc8280xp-dsi-ctrl",
+					     "qcom,sa8775p-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x22096000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <5>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss1_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				refgen-supply = <&refgen>;
+
+				phys = <&mdss1_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dsi1_in: endpoint {
+							remote-endpoint = <&mdss1_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss1_dsi1_phy: phy@22096400 {
+				compatible = "qcom,sc8280xp-dsi-phy-5nm"
+					     "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0 0x22096400 0 0x200>,
+				      <0 0x22096600 0 0x280>,
+				      <0 0x22096900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
 			mdss1_dp1: displayport-controller@22098000 {
 				compatible = "qcom,sc8280xp-dp";
 				reg = <0 0x22098000 0 0x200>,
@@ -6434,10 +6822,10 @@ dispcc1: clock-controller@22100000 {
 				 <&mdss1_dp2_phy 1>,
 				 <&mdss1_dp3_phy 0>,
 				 <&mdss1_dp3_phy 1>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&mdss1_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss1_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss1_dsi1_phy DSI_PIXEL_PLL_CLK>;
 			power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 			#clock-cells = <1>;
-- 
2.53.0

Re: [PATCH v3 4/4] arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

[Dmitry Baryshkov]

On Sat, Feb 28, 2026 at 10:17:15PM +0800, Pengyu Luo wrote:
> The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
> utilizing the same register layouts and clock structures.
> 
> However, DSI won't work properly for now until we submit dispcc fixes.
> And some DSC enabled panels require DPU timing calculation fixes too.
> (hdisplay / width timing round errors cause the fifo error)
> 
> Co-developed-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 404 ++++++++++++++++++++++++-
>  1 file changed, 396 insertions(+), 8 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v3 4/4] arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

[Konrad Dybcio]

On 2/28/26 3:17 PM, Pengyu Luo wrote:
> The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
> utilizing the same register layouts and clock structures.
> 
> However, DSI won't work properly for now until we submit dispcc fixes.
> And some DSC enabled panels require DPU timing calculation fixes too.
> (hdisplay / width timing round errors cause the fifo error)
> 
> Co-developed-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Claude review: arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

[Claude Code Review Bot]

Patch Review

**Status: Has bugs that need fixing.**

This is the main DTS patch adding 4 DSI controllers and 4 DSI PHYs across both MDSS instances. Overall structure looks correct, but there are two issues:

#### Bug 1: Missing comma in PHY compatible strings (CRITICAL)

All four PHY nodes are missing a comma between the two compatible strings. This will cause a DTS compilation error.

For `mdss0_dsi0_phy`:
```dts
+			compatible = "qcom,sc8280xp-dsi-phy-5nm"
+				     "qcom,sa8775p-dsi-phy-5nm";
```

Should be:
```dts
+			compatible = "qcom,sc8280xp-dsi-phy-5nm",
+				     "qcom,sa8775p-dsi-phy-5nm";
```

This same missing comma is present in all four PHY nodes: `mdss0_dsi0_phy`, `mdss0_dsi1_phy`, `mdss1_dsi0_phy`, and `mdss1_dsi1_phy`.

#### Bug 2: Copy-paste error in mdss1_dsi0 assigned-clock-parents

For `mdss1_dsi0`, the byte clock parent references the wrong PHY:

```dts
+			assigned-clock-parents = <&mdss1_dsi1_phy DSI_BYTE_PLL_CLK>,
+						 <&mdss1_dsi0_phy DSI_PIXEL_PLL_CLK>;
```

The byte clock parent should reference `&mdss1_dsi0_phy` (not `&mdss1_dsi1_phy`), matching the pattern in `mdss0_dsi0` where both clock parents come from the same PHY:

```dts
			assigned-clock-parents = <&mdss0_dsi0_phy DSI_BYTE_PLL_CLK>,
						 <&mdss0_dsi0_phy DSI_PIXEL_PLL_CLK>;
```

This is likely a copy-paste error from the mdss1_dsi1 block.

#### Minor observations (not blocking)

- The `dsi_opp_table` is defined inside `mdss0_dsi0` and shared by reference from all four DSI controllers. This is correct per v2 review feedback from Konrad.
- The `#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>` header provides the `DSI_BYTE_PLL_CLK` and `DSI_PIXEL_PLL_CLK` defines. Despite the "28nm" in the filename, these constants are generic and used across PHY generations.
- The `refgen-supply` is correctly present on all four DSI controllers, addressing v3 feedback from Dmitry.
- The whitespace-only changes (adding blank lines between `reg` and endpoint labels) in existing port nodes are valid style cleanups.
- The commit message honestly notes that DSI won't fully work yet due to pending dispcc fixes and DSC timing issues. This is good transparency.

---
Generated by Claude Code Patch Reviewer

Claude review: Add DSI display support for SC8280XP

[Claude Code Review Bot]

Overall Series Review

Subject: Add DSI display support for SC8280XP
Author: Pengyu Luo <mitltlatltl@gmail.com>
Patches: 10
Reviewed: 2026-03-03T14:16:43.200820

---

This is a v3 patch series by Pengyu Luo adding DSI display support for the Qualcomm SC8280XP platform. The series is well-structured: two small dt-bindings patches to register the new compatibles with fallback to SA8775P, one patch documenting the DSI/PHY nodes in the SC8280XP MDSS binding schema, and one large DTS patch adding the actual DSI controller and PHY nodes for both MDSS instances (mdss0 and mdss1).

The v3 changelog addresses prior review feedback (adding refgen supply, fallback compatibles, shared OPP table, resized PLL regions, style fixes).

**However, there are two bugs in patch 4 that must be fixed before merging:**
1. **Missing commas in PHY compatible strings** (4 instances) — will cause DTS compilation failures.
2. **Copy-paste error in mdss1_dsi0 assigned-clock-parents** — byte clock parent references the wrong PHY.

---

---
Generated by Claude Code Patch Reviewer

[PATCH v4 0/4] Add DSI display support for SC8280XP

[Pengyu Luo]

Add DSI display support for SC8280XP.
---
Changes in v4:
- add missing comma in DT
- collect tags
- Link to v3: https://lore.kernel.org/linux-arm-msm/20260228141715.35307-1-mitltlatltl@gmail.com

Changes in v3:
- add the missing refgen supply to DSI (Dmitry)
- Link to v2: https://lore.kernel.org/linux-arm-msm/20260228101907.18043-1-mitltlatltl@gmail.com

Changes in v2:
- fallback to SA8775P compatible (Krzysztof, Konrad, Dmitry)
- fix DT styles[a newline between property and subnode, property order] (Konrad)
- use one dsi_opp_table and all dsi controllers reference it (Konrad)
- resize dsi_pll region to 0x280 (Konrad)
- update commit message
- Link to v1: https://lore.kernel.org/linux-arm-msm/20260225054525.6803-1-mitltlatltl@gmail.com


Pengyu Luo (4):
  dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
  dt-bindings: display/msm: dsi-controller-main: Add SC8280XP
  dt-bindings: display: msm: Document DSI controller and DSI PHY on
    SC8280XP
  arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

 .../display/msm/dsi-controller-main.yaml      |   1 +
 .../bindings/display/msm/dsi-phy-7nm.yaml     |   1 +
 .../display/msm/qcom,sc8280xp-mdss.yaml       |  30 ++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 404 +++++++++++++++++-
 4 files changed, 428 insertions(+), 8 deletions(-)

-- 
2.53.0

[PATCH v4 3/4] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Pengyu Luo]

Document DSI controller and DSI phy on SC8280XP platform.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
v4: There were no changes to the patch.
---
 .../display/msm/qcom,sc8280xp-mdss.yaml       | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
index af79406e16..a710cc84ec 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -50,6 +50,22 @@ patternProperties:
           - qcom,sc8280xp-dp
           - qcom,sc8280xp-edp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-phy-5nm
+
 unevaluatedProperties: false
 
 examples:
@@ -129,6 +145,20 @@ examples:
                     };
                 };
 
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
+
                 port@4 {
                     reg = <4>;
                     endpoint {
-- 
2.53.0

Claude review: dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Claude Code Review Bot]

Patch Review

Adds `dsi@` and `phy@` pattern properties to the sc8280xp-mdss schema, plus example port entries for `port@1` and `port@2` connecting to the DSI endpoints.

No issues. The schema additions follow the same pattern used by other MDSS bindings.

---
Generated by Claude Code Patch Reviewer

[PATCH v2 0/4] Add DSI display support for SC8280XP

[Pengyu Luo]

Add DSI display support for SC8280XP.
---
Changes in v2:
- fallback to SA8775P compatible (Krzysztof, Konrad, Dmitry)
- fix DT styles[a newline between property and subnode, property order] (Konrad)
- use one dsi_opp_table and all dsi controllers reference it (Konrad)
- resize dsi_pll region to 0x280 (Konrad)
- update commit message
- Link to v1: https://lore.kernel.org/linux-arm-msm/20260225054525.6803-1-mitltlatltl@gmail.com

Pengyu Luo (4):
  dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
  dt-bindings: display/msm: dsi-controller-main: Add SC8280XP
  dt-bindings: display: msm: Document DSI controller and DSI PHY on
    SC8280XP
  arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

 .../display/msm/dsi-controller-main.yaml      |   1 +
 .../bindings/display/msm/dsi-phy-7nm.yaml     |   1 +
 .../display/msm/qcom,sc8280xp-mdss.yaml       |  30 ++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 396 +++++++++++++++++-
 4 files changed, 420 insertions(+), 8 deletions(-)

-- 
2.53.0

[PATCH v2 3/4] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Pengyu Luo]

Document DSI controller and DSI phy on SC8280XP platform.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 .../display/msm/qcom,sc8280xp-mdss.yaml       | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
index af79406e1..a710cc84e 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -50,6 +50,22 @@ patternProperties:
           - qcom,sc8280xp-dp
           - qcom,sc8280xp-edp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-phy-5nm
+
 unevaluatedProperties: false
 
 examples:
@@ -129,6 +145,20 @@ examples:
                     };
                 };
 
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
+
                 port@4 {
                     reg = <4>;
                     endpoint {
-- 
2.53.0

Claude review: dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Claude Code Review Bot]

Patch Review

**Status: Looks good with a minor note**

Adds `patternProperties` for DSI controller and PHY child nodes to the sc8280xp-mdss binding, plus extends the example with DPU output port endpoints for DSI0 and DSI1.

The patternProperties look correctly structured:
```yaml
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
```

The example additions add `port@1` and `port@2` for the DPU output ports connecting to DSI0 and DSI1 respectively, which is consistent with the actual DTS in patch 4. The example endpoint labels (`dpu_intf1_out`, `dpu_intf2_out`, `mdss0_dsi0_in`, `mdss0_dsi1_in`) match the convention used in the DTS.

**Minor**: The example could be more complete by including skeleton DSI/PHY child nodes to match the new `patternProperties`, but this isn't strictly required for binding validation.

---

---
Generated by Claude Code Patch Reviewer

[PATCH 0/5] Add DSI display support for SC8280XP

[Pengyu Luo]

Add DSI display support for SC8280XP.

Pengyu Luo (4):
  dt-bindings: display: msm-dsi-phy-7nm: Add SC8280XP
  dt-bindings: display/msm: dsi-controller-main: Add SC8280XP
  dt-bindings: display: msm: Document DSI controller and DSI PHY on
    SC8280XP
  drm/msm/dsi: Add DSI PHY configuration on SC8280XP
  arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP

 .../display/msm/dsi-controller-main.yaml      |   2 +
 .../bindings/display/msm/dsi-phy-7nm.yaml     |   1 +
 .../display/msm/qcom,sc8280xp-mdss.yaml       |  30 ++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 425 +++++++++++++++++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         |   2 +
 5 files changed, 452 insertions(+), 8 deletions(-)

-- 
2.53.0

[PATCH 3/5] dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Pengyu Luo]

Document DSI controller and DSI phy on SC8280XP platform.

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 .../display/msm/qcom,sc8280xp-mdss.yaml       | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
index af79406e1..a710cc84e 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -50,6 +50,22 @@ patternProperties:
           - qcom,sc8280xp-dp
           - qcom,sc8280xp-edp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-phy-5nm
+
 unevaluatedProperties: false
 
 examples:
@@ -129,6 +145,20 @@ examples:
                     };
                 };
 
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
+
                 port@4 {
                     reg = <4>;
                     endpoint {
-- 
2.53.0

Claude review: dt-bindings: display: msm: Document DSI controller and DSI PHY on SC8280XP

[Claude Code Review Bot]

Patch Review

Adds DSI controller and PHY pattern properties to the SC8280XP MDSS binding:

```yaml
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8280xp-dsi-phy-5nm
```

Also adds port@1 and port@2 example endpoints for intf1/intf2 (DSI0/DSI1). Looks correct and follows the pattern of other MDSS bindings.

---

---
Generated by Claude Code Patch Reviewer