Claude review: arm64: dts: qcom: msm8953-flipkart-rimob: Enable display and GPU

[Claude Code Review Bot <claude-review@example.com>]

Patch Review

This DTS patch enables the MDSS display subsystem, DSI panel, WLED backlight, and GPU.

**Observation: `output-high` in pinctrl for active-low reset GPIO**

The panel pinctrl sets:
```dts
panel_default: panel-default-state {
    pins = "gpio61";
    ...
    output-high;
};
```

And the panel node has:
```dts
reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
```

With `GPIO_ACTIVE_LOW`, `gpiod_set_value(1)` drives the pin low (asserting reset). The driver's `nt35532_reset()` starts with `gpiod_set_value_cansleep(ctx->reset_gpio, 0)` which drives the pin high (de-asserting reset). The pinctrl `output-high` is consistent — the panel starts with reset de-asserted. This looks correct.

The probe requests the GPIO with `GPIOD_OUT_HIGH` (logical high = pin driven low = reset asserted), then `nt35532_reset()` deasserts and pulses. This sequencing is fine.

No issues found with the GPU or WLED configuration.

---
Generated by Claude Code Patch Reviewer