From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claude Code Review Bot To: dri-devel-reviews@example.com Subject: Claude review: arm64: dts: qcom: msm8953-flipkart-rimob: Enable touchscreen Date: Mon, 09 Mar 2026 07:46:27 +1000 Message-ID: In-Reply-To: <20260308-rimob-new-features-v1-5-aa2c330572c0@protonmail.com> References: <20260308-rimob-new-features-v1-0-aa2c330572c0@protonmail.com> <20260308-rimob-new-features-v1-5-aa2c330572c0@protonmail.com> X-Mailer: Claude Code Patch Reviewer Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Patch Review Adds Goodix GT5688 on i2c_3 with the correct supply names (`VDDIO`, `AVDD28= `) and interrupt/reset GPIO configuration. One minor note: the node has both `interrupts-extended` and `irq-gpios`. Th= e `irq-gpios` is used by the Goodix driver for pin direction configuration = during initialization, so both are needed =E2=80=94 this is correct for Goo= dix touchscreens. The pinctrl state uses `drive-strength =3D <8>` and `bias-pull-up` for both= interrupt and reset pins, which is reasonable. --- Generated by Claude Code Patch Reviewer