From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claude Code Review Bot To: dri-devel-reviews@example.com Subject: Claude review: arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI Date: Mon, 25 May 2026 18:25:02 +1000 Message-ID: In-Reply-To: <20260522161105.277519-19-ivitro@gmail.com> References: <20260522161105.277519-13-ivitro@gmail.com> <20260522161105.277519-19-ivitro@gmail.com> X-Mailer: Claude Code Patch Reviewer Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Patch Review Nearly identical to patch 5 but for the 7" Riverdi RVT70HSLNWCA0 panel. The= key differences: - `compatible =3D "riverdi,rvt70hslnwca0", "panel-lvds"` - Resolution: 1024x600 vs 1280x800 - `clock-frequency =3D <51200000>` (~51.2 MHz) =E2=80=94 correct for 1024x6= 00@60Hz - Physical dimensions: `height-mm =3D <86>; width-mm =3D <154>` vs 136/217m= m for the 10.1" - The touchscreen is identical to patch 5 (`ilitek,ili2132` at `0x41`). Thi= s makes sense as both DSI displays use the same touch controller. - Only a composite DTB with `k3-am625-verdin-wifi-dev.dtb` is added. Patch = 5 also added Dahlia composites (both WiFi and non-WiFi). **Consider adding = Dahlia composite DTBs here too for consistency**, since the commit message = says it works on "Dahlia (X17) and Development Board (X48)." **Minor: Missing Dahlia composite DTB entries compared to patch 5.** --- Generated by Claude Code Patch Reviewer