[PATCH v11 2/2] drm/bridge: Add Lontium LT7911EXC eDP to MIPI DSI bridge

[syyang@lontium.com]

From: Sunyun Yang <syyang@lontium.com>

Add support for the Lontium LT7911EXC bridge chip, which converts
eDP input to MIPI DSI output using an internal firmware-controlled
pipeline.

The driver provides:
- DRM bridge integration for eDP-to-DSI routing
- MIPI DSI host interface for downstream panel attachment
- Firmware upgrade mechanism over I2C (erase/program/verify)
- GPIO-based reset and regulator management

Display timing and MIPI DCS packet generation are handled by the chip
firmware and are not configured by the driver.

Signed-off-by: Sunyun Yang <syyang@lontium.com>
---
 drivers/gpu/drm/bridge/Kconfig             |  16 +
 drivers/gpu/drm/bridge/Makefile            |   1 +
 drivers/gpu/drm/bridge/lontium-lt7911exc.c | 698 +++++++++++++++++++++
 3 files changed, 715 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/lontium-lt7911exc.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index c3209b0f4678..013e431e8871 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -132,6 +132,22 @@ config DRM_ITE_IT6505
 	help
 	  ITE IT6505 DisplayPort bridge chip driver.
 
+config DRM_LONTIUM_LT7911EXC
+	tristate "Lontium eDP/MIPI DSI bridge"
+	depends on OF
+	depends on I2C
+	select CRC32
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	select DRM_KMS_HELPER
+	select FW_LOADER
+	select REGMAP_I2C
+	help
+	  DRM driver for the Lontium LT7911EXC bridge
+	  chip.The LT7911EXC converts eDP input to MIPI
+	  DSI output.
+	  Please say Y if you have such hardware.
+
 config DRM_LONTIUM_LT8912B
 	tristate "Lontium LT8912B DSI/HDMI bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index beab5b695a6e..70ddca75dd3a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o
 obj-$(CONFIG_DRM_INNO_HDMI) += inno-hdmi.o
 obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o
 obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o
+obj-$(CONFIG_DRM_LONTIUM_LT7911EXC) += lontium-lt7911exc.o
 obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o
 obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o
 obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
diff --git a/drivers/gpu/drm/bridge/lontium-lt7911exc.c b/drivers/gpu/drm/bridge/lontium-lt7911exc.c
new file mode 100644
index 000000000000..1aec60f02f91
--- /dev/null
+++ b/drivers/gpu/drm/bridge/lontium-lt7911exc.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2026 Lontium Semiconductor, Inc.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <video/mipi_display.h>
+
+#define FW_SIZE (64 * 1024)
+#define LT_PAGE_SIZE 32
+#define FW_FILE  "Lontium/lt7911exc_fw.bin"
+#define LT7911EXC_PAGE_CONTROL 0xff
+
+struct lt7911exc_dsi_output {
+	struct mipi_dsi_device *dev;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+};
+
+struct lt7911exc {
+	struct device *dev;
+	struct i2c_client *client;
+	struct drm_bridge bridge;
+	struct work_struct work;
+	struct mipi_dsi_host dsi_host;
+	struct lt7911exc_dsi_output output;
+	struct regmap *regmap;
+	/* Fast lock: guards short register r/w and status checks */
+	struct mutex ocm_lock;
+	/* Long lock: serializes firmware upgrade process to prevent DRM interference */
+	struct mutex upgrade_lock;
+	struct gpio_desc *reset_gpio;
+	int fw_version;
+	bool upgrade;
+	bool removed;
+};
+
+static const struct regmap_range_cfg lt7911exc_ranges[] = {
+	{
+		.name = "register_range",
+		.range_min =  0,
+		.range_max = 0xe8ff,
+		.selector_reg = LT7911EXC_PAGE_CONTROL,
+		.selector_mask = 0xff,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x100,
+	},
+};
+
+static const struct regmap_config lt7911exc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xe8ff,
+	.ranges = lt7911exc_ranges,
+	.num_ranges = ARRAY_SIZE(lt7911exc_ranges),
+};
+
+static u32 cal_crc32_custom(const u8 *data, u64 length)
+{
+	u32 crc = 0xffffffff;
+	u8 buf[4];
+	u64 i;
+
+	if (!length || (length & 3))
+		return 0;
+
+	for (i = 0; i < length; i += 4) {
+		buf[0] = data[i + 3];
+		buf[1] = data[i + 2];
+		buf[2] = data[i + 1];
+		buf[3] = data[i + 0];
+		crc = crc32_be(crc, buf, 4);
+	}
+
+	return crc;
+}
+
+static inline struct lt7911exc *bridge_to_lt7911exc(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct lt7911exc, bridge);
+}
+
+static inline struct lt7911exc *dsi_host_to_lt7911exc(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct lt7911exc, dsi_host);
+}
+
+static void lt7911exc_reset(struct lt7911exc *lt7911exc)
+{
+	/* Assert reset pin: logical 1 -> physical state low (Reset Active) */
+	gpiod_set_value_cansleep(lt7911exc->reset_gpio, 1);
+	msleep(20);
+
+	/* Deassert reset pin: logical 0 -> physical state high (Run state) */
+	gpiod_set_value_cansleep(lt7911exc->reset_gpio, 0);
+	msleep(400);
+
+	dev_dbg(lt7911exc->dev, "lt7911exc physical hardware reset sequence completed.\n");
+}
+
+static int lt7911exc_hw_mcu_halt(struct lt7911exc *lt7911exc)
+{
+	return regmap_write(lt7911exc->regmap, 0xe0ee, 0x01);
+}
+
+static int lt7911exc_hw_mcu_run(struct lt7911exc *lt7911exc)
+{
+	return regmap_write(lt7911exc->regmap, 0xe0ee, 0x00);
+}
+
+static int lt7911exc_regulator_enable(struct lt7911exc *lt7911exc)
+{
+	int ret;
+
+	ret = devm_regulator_get_enable(lt7911exc->dev, "vcc");
+	if (ret < 0)
+		return dev_err_probe(lt7911exc->dev, ret, "failed to enable vcc regulator\n");
+
+	usleep_range(5000, 10000);
+
+	ret = devm_regulator_get_enable(lt7911exc->dev, "vdd");
+	if (ret < 0)
+		return dev_err_probe(lt7911exc->dev, ret, "failed to enable vdd regulator\n");
+
+	return 0;
+}
+
+static int lt7911exc_read_version(struct lt7911exc *lt7911exc)
+{
+	u8 buf[3];
+	int ret;
+
+	/* no need to halt MCU for this register access */
+	ret = regmap_bulk_read(lt7911exc->regmap, 0xe081, buf, ARRAY_SIZE(buf));
+	if (ret)
+		return ret;
+
+	return (buf[0] << 16) | (buf[1] << 8) | buf[2];
+}
+
+static int lt7911exc_block_erase(struct lt7911exc *lt7911exc)
+{
+	struct device *dev = lt7911exc->dev;
+	const u32 addr = 0x00;
+	int ret;
+
+	const struct reg_sequence seq_write[] = {
+		REG_SEQ0(0xe0ee, 0x01),
+		REG_SEQ0(0xe054, 0x01),
+		REG_SEQ0(0xe055, 0x06),
+		REG_SEQ0(0xe051, 0x01),
+		REG_SEQ0(0xe051, 0x00),
+		REG_SEQ0(0xe054, 0x05),
+		REG_SEQ0(0xe055, 0xd8),
+		REG_SEQ0(0xe05a, (addr >> 16) & 0xff),
+		REG_SEQ0(0xe05b, (addr >> 8) & 0xff),
+		REG_SEQ0(0xe05c, addr & 0xff),
+		REG_SEQ0(0xe051, 0x01),
+		REG_SEQ0(0xe050, 0x00),
+	};
+
+	ret = regmap_multi_reg_write(lt7911exc->regmap, seq_write, ARRAY_SIZE(seq_write));
+	if (ret)
+		return ret;
+
+	msleep(200);
+	dev_dbg(dev, "erase flash done.\n");
+
+	return 0;
+}
+
+static int lt7911exc_prog_init(struct lt7911exc *lt7911exc, u64 addr)
+{
+	int ret;
+
+	const struct reg_sequence seq_write[] = {
+		REG_SEQ0(0xe0ee, 0x01),
+		REG_SEQ0(0xe05f, 0x01),
+		REG_SEQ0(0xe05a, (addr >> 16) & 0xff),
+		REG_SEQ0(0xe05b, (addr >> 8) & 0xff),
+		REG_SEQ0(0xe05c, addr & 0xff),
+	};
+
+	ret = regmap_multi_reg_write(lt7911exc->regmap, seq_write, ARRAY_SIZE(seq_write));
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int lt7911exc_write_data(struct lt7911exc *lt7911exc, const struct firmware *fw, u64 addr)
+{
+	struct device *dev = lt7911exc->dev;
+	int ret;
+	int page = 0, num = 0, page_len = 0;
+	u64 size, offset;
+	const u8 *data;
+
+	data = fw->data;
+	size = fw->size;
+	page = (size + LT_PAGE_SIZE - 1) / LT_PAGE_SIZE;
+	if (page * LT_PAGE_SIZE > FW_SIZE) {
+		dev_err(dev, "firmware size out of range\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "%u pages, total size %llu byte\n", page, size);
+
+	for (num = 0; num < page; num++) {
+		offset = num * LT_PAGE_SIZE;
+		page_len = (offset + LT_PAGE_SIZE <= size) ? LT_PAGE_SIZE : (size - offset);
+		ret = lt7911exc_prog_init(lt7911exc, addr);
+		if (ret)
+			return ret;
+
+		ret = regmap_raw_write(lt7911exc->regmap, 0xe05d, &data[offset], page_len);
+		if (ret) {
+			dev_err(dev, "write error at page %d\n", num);
+			return ret;
+		}
+
+		if (page_len < LT_PAGE_SIZE) {
+			regmap_write(lt7911exc->regmap, 0xe05f, 0x05);
+			regmap_write(lt7911exc->regmap, 0xe05f, 0x01);
+			//hardware requires delay
+			usleep_range(1000, 2000);
+		}
+
+		regmap_write(lt7911exc->regmap, 0xe05f, 0x00);
+		addr += LT_PAGE_SIZE;
+	}
+
+	return 0;
+}
+
+static int lt7911exc_write_crc(struct lt7911exc *lt7911exc, u32 crc32, u64 addr)
+{
+	u8 crc[4];
+	int ret;
+
+	crc[0] = crc32 & 0xff;
+	crc[1] = (crc32 >> 8) & 0xff;
+	crc[2] = (crc32 >> 16) & 0xff;
+	crc[3] = (crc32 >> 24) & 0xff;
+
+	regmap_write(lt7911exc->regmap, 0xe05f, 0x01);
+	regmap_write(lt7911exc->regmap, 0xe05a, (addr >> 16) & 0xff);
+	regmap_write(lt7911exc->regmap, 0xe05b, (addr >> 8) & 0xff);
+	regmap_write(lt7911exc->regmap, 0xe05c, addr & 0xff);
+
+	ret = regmap_raw_write(lt7911exc->regmap, 0xe05d, crc, 4);
+	if (ret)
+		return ret;
+
+	regmap_write(lt7911exc->regmap, 0xe05f, 0x05);
+	regmap_write(lt7911exc->regmap, 0xe05f, 0x01);
+	usleep_range(1000, 2000);
+	regmap_write(lt7911exc->regmap, 0xe05f, 0x00);
+
+	return 0;
+}
+
+static int lt7911exc_upgrade_result(struct lt7911exc *lt7911exc, u32 crc32)
+{
+	struct device *dev = lt7911exc->dev;
+	u32 read_hw_crc = 0;
+	u8 crc_tmp[4];
+	int ret;
+
+	regmap_write(lt7911exc->regmap, 0xe0ee, 0x01);
+	regmap_write(lt7911exc->regmap, 0xe07b, 0x60);
+	regmap_write(lt7911exc->regmap, 0xe07b, 0x40);
+	msleep(150);
+	ret = regmap_bulk_read(lt7911exc->regmap, 0x22, crc_tmp, ARRAY_SIZE(crc_tmp));
+	if (ret) {
+		dev_err(lt7911exc->dev, "Failed to read CRC: %d\n", ret);
+		return ret;
+	}
+	regmap_write(lt7911exc->regmap, 0xe0ee, 0x00);
+
+	read_hw_crc = ((u32)crc_tmp[0] << 24) | ((u32)crc_tmp[1] << 16) |
+				((u32)crc_tmp[2] << 8) | ((u32)crc_tmp[3]);
+
+	if (read_hw_crc != crc32) {
+		dev_err(dev, "lt7911exc firmware upgrade failed, expected CRC=0x%08x, read CRC=0x%08x\n",
+			crc32, read_hw_crc);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "lt7911exc firmware upgrade success, CRC=0x%08x\n", read_hw_crc);
+	return 0;
+}
+
+static void lt7911exc_firmware_upgrade_work(struct work_struct *work)
+{
+	struct lt7911exc *lt7911exc = container_of(work, struct lt7911exc, work);
+	struct device *dev = lt7911exc->dev;
+	const struct firmware *fw;
+	u8 *buffer;
+	size_t total_size = FW_SIZE - 4;
+	u32 crc32;
+	int ret;
+
+	ret = request_firmware(&fw, FW_FILE, dev);
+	if (ret) {
+		dev_err(dev, "failed to load '%s'\n", FW_FILE);
+		goto out_clear_status;
+	}
+
+	if (fw->size > total_size) {
+		dev_err(dev, "firmware too large (%zu > %zu)\n", fw->size, total_size);
+		goto out_release_fw;
+	}
+
+	buffer = kvmalloc(total_size, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto out_release_fw;
+	}
+
+	memset(buffer, 0xff, total_size);
+	memcpy(buffer, fw->data, fw->size);
+	crc32 = cal_crc32_custom(buffer, total_size);
+	kvfree(buffer);
+
+	mutex_lock(&lt7911exc->upgrade_lock);
+
+	mutex_lock(&lt7911exc->ocm_lock);
+	lt7911exc_reset(lt7911exc);
+	lt7911exc_hw_mcu_halt(lt7911exc);
+	mutex_unlock(&lt7911exc->ocm_lock);
+
+	ret = lt7911exc_block_erase(lt7911exc);
+	if (ret) {
+		dev_err(dev, "failed to block erase.\n");
+		goto out_unlock;
+	}
+
+	ret = lt7911exc_write_data(lt7911exc, fw, 0);
+	if (ret < 0) {
+		dev_err(dev, "failed to write firmware data\n");
+		goto out_unlock;
+	}
+
+	ret = lt7911exc_write_crc(lt7911exc, crc32, FW_SIZE - 4);
+	if (ret < 0) {
+		dev_err(dev, "failed to write firmware crc\n");
+		goto out_unlock;
+	}
+
+	mutex_lock(&lt7911exc->ocm_lock);
+	lt7911exc_reset(lt7911exc);
+	mutex_unlock(&lt7911exc->ocm_lock);
+
+	ret = lt7911exc_upgrade_result(lt7911exc, crc32);
+	if (ret)
+		dev_err(dev, "firmware verification failed\n");
+
+out_unlock:
+	mutex_lock(&lt7911exc->ocm_lock);
+	lt7911exc_hw_mcu_run(lt7911exc);
+	lt7911exc->fw_version = lt7911exc_read_version(lt7911exc);
+	mutex_unlock(&lt7911exc->ocm_lock);
+
+	mutex_unlock(&lt7911exc->upgrade_lock);
+	/* Notify DRM framework that hardware state changed/needs a modeset */
+	if (lt7911exc->bridge.dev)
+		drm_kms_helper_hotplug_event(lt7911exc->bridge.dev);
+
+out_release_fw:
+	release_firmware(fw);
+
+out_clear_status:
+	mutex_lock(&lt7911exc->ocm_lock);
+	/* Only clear status if the module is not in the process of removal */
+	if (!lt7911exc->removed)
+		lt7911exc->upgrade = false;
+	mutex_unlock(&lt7911exc->ocm_lock);
+}
+
+static void lt7911exc_atomic_pre_enable(struct drm_bridge *bridge, struct drm_atomic_state *state)
+{
+	struct lt7911exc *lt7911exc = bridge_to_lt7911exc(bridge);
+
+	guard(mutex)(&lt7911exc->ocm_lock);
+
+	//enable mipi stream
+	if (!lt7911exc->upgrade)
+		regmap_write(lt7911exc->regmap, 0xe0b0, 0x01);
+}
+
+static void lt7911exc_atomic_post_disable(struct drm_bridge *bridge, struct drm_atomic_state *state)
+{
+	struct lt7911exc *lt7911exc = bridge_to_lt7911exc(bridge);
+
+	guard(mutex)(&lt7911exc->ocm_lock);
+
+	//disable mipi stream
+	if (!lt7911exc->upgrade)
+		regmap_write(lt7911exc->regmap, 0xe0b0, 0x00);
+}
+
+static int lt7911exc_bridge_attach(struct drm_bridge *bridge,
+				   struct drm_encoder *encoder,
+				   enum drm_bridge_attach_flags flags)
+{
+	struct lt7911exc *lt7911exc = bridge_to_lt7911exc(bridge);
+
+	if (!lt7911exc->output.bridge) {
+		dev_warn(lt7911exc->dev, "Next bridge/panel not attached yet, deferring\n");
+		return -EPROBE_DEFER;
+	}
+
+	return drm_bridge_attach(encoder, lt7911exc->output.bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs lt7911exc_bridge_funcs = {
+	.attach = lt7911exc_bridge_attach,
+	.atomic_pre_enable = lt7911exc_atomic_pre_enable,
+	.atomic_post_disable = lt7911exc_atomic_post_disable,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+};
+
+static int lt7911exc_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *dev)
+{
+	struct lt7911exc *lt7911exc = dsi_host_to_lt7911exc(host);
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	if (lt7911exc->output.dev)
+		return -EBUSY;
+
+	ret = drm_of_find_panel_or_bridge(host->dev->of_node, 1, 0, &panel, &bridge);
+	if (ret)
+		return ret;
+
+	if (panel) {
+		bridge = drm_panel_bridge_add_typed(panel, DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(bridge))
+			return PTR_ERR(bridge);
+	}
+	lt7911exc->output.dev = dev;
+	lt7911exc->output.bridge = bridge;
+	lt7911exc->output.panel = panel;
+
+	return 0;
+}
+
+static int lt7911exc_dsi_host_detach(struct mipi_dsi_host *host, struct mipi_dsi_device *dev)
+{
+	struct lt7911exc *lt7911exc = dsi_host_to_lt7911exc(host);
+
+	if (!lt7911exc->output.dev)
+		return 0;
+
+	lt7911exc->output.dev = NULL;
+
+	return 0;
+}
+
+/*
+ * The internal firmware controls the panel initialization
+ * sequence and handles all MIPI DSI command transmission.
+ */
+static ssize_t lt7911exc_dsi_host_transfer(struct mipi_dsi_host *host,
+					   const struct mipi_dsi_msg *msg)
+{
+	struct lt7911exc *lt7911exc = dsi_host_to_lt7911exc(host);
+
+	if (msg->rx_len) {
+		dev_warn(lt7911exc->dev, "MIPI DSI read is not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	switch (msg->type) {
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_DCS_LONG_WRITE:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+	case MIPI_DSI_GENERIC_LONG_WRITE:
+	break;
+	default:
+	return -EOPNOTSUPP;
+	}
+
+	guard(mutex)(&lt7911exc->ocm_lock);
+
+	if (lt7911exc->upgrade)
+		return -EBUSY;
+
+	return msg->tx_len;
+}
+
+static const struct mipi_dsi_host_ops lt7911exc_dsi_host_ops = {
+	.attach = lt7911exc_dsi_host_attach,
+	.detach = lt7911exc_dsi_host_detach,
+	.transfer = lt7911exc_dsi_host_transfer,
+};
+
+static ssize_t lt7911exc_firmware_store(struct device *dev, struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct lt7911exc *lt7911exc = dev_get_drvdata(dev);
+
+	if (!mutex_trylock(&lt7911exc->upgrade_lock))
+		return -EBUSY;
+
+	mutex_lock(&lt7911exc->ocm_lock);
+
+	if (lt7911exc->upgrade || lt7911exc->removed) {
+		mutex_unlock(&lt7911exc->ocm_lock);
+		mutex_unlock(&lt7911exc->upgrade_lock);
+		return -EBUSY;
+	}
+
+	lt7911exc->upgrade = true;
+	mutex_unlock(&lt7911exc->ocm_lock);
+	mutex_unlock(&lt7911exc->upgrade_lock);
+
+	schedule_work(&lt7911exc->work);
+
+	return len;
+}
+
+static ssize_t lt7911exc_firmware_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lt7911exc *lt7911exc = dev_get_drvdata(dev);
+	int version;
+
+	mutex_lock(&lt7911exc->ocm_lock);
+	version = lt7911exc->fw_version;
+	mutex_unlock(&lt7911exc->ocm_lock);
+	return sysfs_emit(buf, "0x%04x\n", version);
+}
+
+static DEVICE_ATTR_RW(lt7911exc_firmware);
+
+static struct attribute *lt7911exc_attrs[] = {
+	&dev_attr_lt7911exc_firmware.attr,
+	NULL,
+};
+
+static const struct attribute_group lt7911exc_attr_group = {
+	.attrs = lt7911exc_attrs,
+};
+
+static const struct attribute_group *lt7911exc_attr_groups[] = {
+	&lt7911exc_attr_group,
+	NULL,
+};
+
+static int lt7911exc_probe(struct i2c_client *client)
+{
+	struct lt7911exc *lt7911exc;
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return dev_err_probe(dev, -ENODEV, "device doesn't support I2C\n");
+
+	lt7911exc = devm_drm_bridge_alloc(dev, struct lt7911exc, bridge, &lt7911exc_bridge_funcs);
+	if (IS_ERR(lt7911exc))
+		return dev_err_probe(dev, PTR_ERR(lt7911exc), "drm bridge alloc failed.\n");
+
+	dev_set_drvdata(dev, lt7911exc);
+
+	lt7911exc->client = client;
+	lt7911exc->dev = dev;
+	lt7911exc->upgrade = false;
+	lt7911exc->removed = false;
+
+	ret = devm_mutex_init(dev, &lt7911exc->ocm_lock);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to init mutex\n");
+
+	ret = devm_mutex_init(dev, &lt7911exc->upgrade_lock);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to init upgrade_lock\n");
+
+	lt7911exc->regmap = devm_regmap_init_i2c(client, &lt7911exc_regmap_config);
+	if (IS_ERR(lt7911exc->regmap))
+		return dev_err_probe(dev, PTR_ERR(lt7911exc->regmap), "regmap i2c init failed\n");
+
+	lt7911exc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(lt7911exc->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(lt7911exc->reset_gpio),
+				     "failed to acquire reset gpio\n");
+
+	ret = lt7911exc_regulator_enable(lt7911exc);
+	if (ret)
+		return ret;
+
+	lt7911exc_reset(lt7911exc);
+
+	mutex_lock(&lt7911exc->ocm_lock);
+
+	lt7911exc->fw_version = lt7911exc_read_version(lt7911exc);
+
+	mutex_unlock(&lt7911exc->ocm_lock);
+
+	if (lt7911exc->fw_version < 0)
+		return dev_err_probe(dev, lt7911exc->fw_version, "failed read version of chip\n");
+
+	lt7911exc->dsi_host.dev = dev;
+	lt7911exc->dsi_host.ops = &lt7911exc_dsi_host_ops;
+	lt7911exc->bridge.of_node = np;
+
+	INIT_WORK(&lt7911exc->work, lt7911exc_firmware_upgrade_work);
+
+	i2c_set_clientdata(client, lt7911exc);
+
+	drm_bridge_add(&lt7911exc->bridge);
+
+	ret = mipi_dsi_host_register(&lt7911exc->dsi_host);
+	if (ret) {
+		drm_bridge_remove(&lt7911exc->bridge);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void lt7911exc_remove(struct i2c_client *client)
+{
+	struct lt7911exc *lt7911exc = i2c_get_clientdata(client);
+
+	mutex_lock(&lt7911exc->ocm_lock);
+	lt7911exc->removed = true;
+	lt7911exc->upgrade = true;
+	mutex_unlock(&lt7911exc->ocm_lock);
+
+	cancel_work_sync(&lt7911exc->work);
+
+	mipi_dsi_host_unregister(&lt7911exc->dsi_host);
+	drm_bridge_remove(&lt7911exc->bridge);
+
+	if (lt7911exc->output.panel && lt7911exc->output.bridge)
+		drm_panel_bridge_remove(lt7911exc->output.bridge);
+
+	gpiod_set_value_cansleep(lt7911exc->reset_gpio, 1);
+}
+
+static const struct i2c_device_id lt7911exc_i2c_table[] = {
+	{"lt7911exc"},
+	{/* sentinel */}
+};
+
+MODULE_DEVICE_TABLE(i2c, lt7911exc_i2c_table);
+
+static const struct of_device_id lt7911exc_devices[] = {
+	{.compatible = "lontium,lt7911exc"},
+	{/* sentinel */}
+};
+MODULE_DEVICE_TABLE(of, lt7911exc_devices);
+
+static struct i2c_driver lt7911exc_driver = {
+	.id_table	= lt7911exc_i2c_table,
+	.probe		= lt7911exc_probe,
+	.remove		= lt7911exc_remove,
+	.driver		= {
+		.name	= "lt7911exc",
+		.of_match_table = lt7911exc_devices,
+		.dev_groups = lt7911exc_attr_groups,
+	},
+};
+module_i2c_driver(lt7911exc_driver);
+
+MODULE_AUTHOR("SunYun Yang <syyang@lontium.com>");
+MODULE_DESCRIPTION("Lontium LT7911EXC EDP to MIPI DSI bridge driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FW_FILE);
-- 
2.34.1