From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Sandy Huang <hjc@rock-chips.com>, Heiko Stübner <heiko@sntech.de>,
Andy Yan <andy.yan@rock-chips.com>,
Daniel Stone <daniels@collabora.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Maíra Canal <mcanal@igalia.com>,
Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Cc: kernel@collabora.com, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
Diederik de Haas <diederik@cknow-tech.com>,
Maud Spierings <maud_spierings@hotmail.com>
Subject: [PATCH v7 14/30] drm/bridge: dw-hdmi-qp: Add HDMI 2.0 SCDC scrambling support
Date: Tue, 02 Jun 2026 01:44:14 +0300 [thread overview]
Message-ID: <20260602-dw-hdmi-qp-scramb-v7-14-445eb54ee1ed@collabora.com> (raw)
In-Reply-To: <20260602-dw-hdmi-qp-scramb-v7-0-445eb54ee1ed@collabora.com>
Enable HDMI 2.0 display modes (e.g. 4K@60Hz) by implementing SCDC
scrambling and high TMDS clock ratio management for TMDS character
rates exceeding the 340 MHz HDMI 1.4b limit.
Reject modes requiring TMDS rates above 600 MHz since those require
HDMI 2.1 FRL which is not yet supported. In no_hpd configurations,
further restrict to 340 MHz because SCDC requires a connected sink.
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Tested-by: Maud Spierings <maud_spierings@hotmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c | 76 +++++++++++++++++++++-------
1 file changed, 58 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
index 3f72bea20ba4..0250ddd8f91a 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
@@ -2,6 +2,7 @@
/*
* Copyright (c) 2021-2022 Rockchip Electronics Co., Ltd.
* Copyright (c) 2024 Collabora Ltd.
+ * Copyright (c) 2025 Amazon.com, Inc. or its affiliates.
*
* Author: Algea Cao <algea.cao@rock-chips.com>
* Author: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
@@ -15,12 +16,12 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
-#include <linux/workqueue.h>
#include <drm/bridge/dw_hdmi_qp.h>
#include <drm/display/drm_hdmi_helper.h>
#include <drm/display/drm_hdmi_cec_helper.h>
#include <drm/display/drm_hdmi_state_helper.h>
+#include <drm/display/drm_scdc_helper.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
@@ -162,6 +163,7 @@ struct dw_hdmi_qp {
} phy;
unsigned long ref_clk_rate;
+ struct drm_connector *curr_conn;
struct regmap *regm;
int main_irq;
@@ -752,26 +754,35 @@ static void dw_hdmi_qp_bridge_atomic_enable(struct drm_bridge *bridge,
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
struct drm_connector_state *conn_state;
- struct drm_connector *connector;
unsigned int op_mode;
+ int ret;
- connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
- if (WARN_ON(!connector))
+ hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(state,
+ bridge->encoder);
+ if (WARN_ON(!hdmi->curr_conn))
return;
- conn_state = drm_atomic_get_new_connector_state(state, connector);
+ conn_state = drm_atomic_get_new_connector_state(state, hdmi->curr_conn);
if (WARN_ON(!conn_state))
return;
- if (connector->display_info.is_hdmi) {
- dev_dbg(hdmi->dev, "%s mode=HDMI %s rate=%llu bpc=%u\n", __func__,
- drm_hdmi_connector_get_output_format_name(conn_state->hdmi.output_format),
- conn_state->hdmi.tmds_char_rate, conn_state->hdmi.output_bpc);
+ if (hdmi->curr_conn->display_info.is_hdmi) {
op_mode = 0;
hdmi->tmds_char_rate = conn_state->hdmi.tmds_char_rate;
+
+ if (conn_state->hdmi.scrambler_needed) {
+ ret = drm_scdc_start_scrambling(hdmi->curr_conn);
+ if (ret)
+ dev_warn(hdmi->dev, "Failed to setup SCDC: %d\n", ret);
+ }
+
+ dev_dbg(hdmi->dev, "%s mode=HDMI %s rate=%llu bpc=%u scramb=%d\n", __func__,
+ drm_hdmi_connector_get_output_format_name(conn_state->hdmi.output_format),
+ conn_state->hdmi.tmds_char_rate, conn_state->hdmi.output_bpc,
+ hdmi->curr_conn->hdmi.scrambler_enabled);
} else {
- dev_dbg(hdmi->dev, "%s mode=DVI\n", __func__);
op_mode = OPMODE_DVI;
+ dev_dbg(hdmi->dev, "%s mode=DVI\n", __func__);
}
hdmi->phy.ops->init(hdmi, hdmi->phy.data);
@@ -779,7 +790,7 @@ static void dw_hdmi_qp_bridge_atomic_enable(struct drm_bridge *bridge,
dw_hdmi_qp_mod(hdmi, HDCP2_BYPASS, HDCP2_BYPASS, HDCP2LOGIC_CONFIG0);
dw_hdmi_qp_mod(hdmi, op_mode, OPMODE_DVI, LINK_CONFIG0);
- drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
+ drm_atomic_helper_connector_hdmi_update_infoframes(hdmi->curr_conn, state);
}
static void dw_hdmi_qp_bridge_atomic_disable(struct drm_bridge *bridge,
@@ -787,8 +798,14 @@ static void dw_hdmi_qp_bridge_atomic_disable(struct drm_bridge *bridge,
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
+ if (!hdmi->curr_conn)
+ return;
+
hdmi->tmds_char_rate = 0;
+ drm_scdc_stop_scrambling(hdmi->curr_conn);
+
+ hdmi->curr_conn = NULL;
hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
}
@@ -830,12 +847,12 @@ dw_hdmi_qp_bridge_tmds_char_rate_valid(const struct drm_bridge *bridge,
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
- /*
- * TODO: when hdmi->no_hpd is 1 we must not support modes that
- * require scrambling, including every mode with a clock above
- * HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ.
- */
- if (rate > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ) {
+ if (hdmi->no_hpd && rate > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ) {
+ dev_dbg(hdmi->dev, "Unsupported TMDS char rate in no_hpd mode: %lld\n", rate);
+ return MODE_CLOCK_HIGH;
+ }
+
+ if (rate > HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ) {
dev_dbg(hdmi->dev, "Unsupported TMDS char rate: %lld\n", rate);
return MODE_CLOCK_HIGH;
}
@@ -843,6 +860,26 @@ dw_hdmi_qp_bridge_tmds_char_rate_valid(const struct drm_bridge *bridge,
return MODE_OK;
}
+static int dw_hdmi_qp_bridge_scrambler_enable(struct drm_bridge *bridge)
+{
+ struct dw_hdmi_qp *hdmi = bridge->driver_private;
+
+ dw_hdmi_qp_write(hdmi, 1, SCRAMB_CONFIG0);
+ dev_dbg(hdmi->dev, "scrambler enabled\n");
+
+ return 0;
+}
+
+static int dw_hdmi_qp_bridge_scrambler_disable(struct drm_bridge *bridge)
+{
+ struct dw_hdmi_qp *hdmi = bridge->driver_private;
+
+ dw_hdmi_qp_write(hdmi, 0, SCRAMB_CONFIG0);
+ dev_dbg(hdmi->dev, "scrambler disabled\n");
+
+ return 0;
+}
+
static int dw_hdmi_qp_bridge_clear_avi_infoframe(struct drm_bridge *bridge)
{
struct dw_hdmi_qp *hdmi = bridge->driver_private;
@@ -1216,6 +1253,8 @@ static const struct drm_bridge_funcs dw_hdmi_qp_bridge_funcs = {
.hpd_disable = dw_hdmi_qp_bridge_hpd_disable,
.edid_read = dw_hdmi_qp_bridge_edid_read,
.hdmi_tmds_char_rate_valid = dw_hdmi_qp_bridge_tmds_char_rate_valid,
+ .hdmi_scrambler_enable = dw_hdmi_qp_bridge_scrambler_enable,
+ .hdmi_scrambler_disable = dw_hdmi_qp_bridge_scrambler_disable,
.hdmi_clear_avi_infoframe = dw_hdmi_qp_bridge_clear_avi_infoframe,
.hdmi_write_avi_infoframe = dw_hdmi_qp_bridge_write_avi_infoframe,
.hdmi_clear_hdmi_infoframe = dw_hdmi_qp_bridge_clear_hdmi_infoframe,
@@ -1342,7 +1381,8 @@ struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,
DRM_BRIDGE_OP_HDMI |
DRM_BRIDGE_OP_HDMI_AUDIO |
DRM_BRIDGE_OP_HDMI_HDR_DRM_INFOFRAME |
- DRM_BRIDGE_OP_HDMI_SPD_INFOFRAME;
+ DRM_BRIDGE_OP_HDMI_SPD_INFOFRAME |
+ DRM_BRIDGE_OP_HDMI_SCRAMBLER;
if (!hdmi->no_hpd)
hdmi->bridge.ops |= DRM_BRIDGE_OP_HPD;
hdmi->bridge.of_node = pdev->dev.of_node;
--
2.54.0
next prev parent reply other threads:[~2026-06-01 22:45 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-01 22:44 [PATCH v7 00/30] Add HDMI 2.0 support to DW HDMI QP TX Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 01/30] drm/fb-helper: Remove unused local variable in hotplug_event() Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 02/30] drm/connector: Add HDMI 2.0 scrambler infrastructure Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 03/30] drm/display: scdc_helper: Add macro for connector-prefixed debug messages Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 04/30] drm/display: scdc_helper: Add HDMI 2.0 scrambling management helpers Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 05/30] drm/display: hdmi_state_helper: Add ctx-aware hotplug helper for SCDC sync Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 06/30] drm/display: hdmi_state_helper: Plumb HDMI 2.0 source scrambling capability Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 07/30] drm/bridge: Remove redundant error check in drm_bridge_helper_reset_crtc() Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 08/30] drm/bridge: Add HDMI 2.0 scrambler bridge operation and callbacks Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 09/30] drm/display: bridge_connector: Use cached connector status in .get_modes() Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 10/30] drm/display: bridge_connector: Switch to .detect_ctx() connector helper Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 11/30] drm/display: bridge_connector: Wire up HDMI 2.0 scrambler callbacks Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 12/30] drm/bridge: dw-hdmi-qp: Rate limit i2c read error messages Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 13/30] drm/bridge: dw-hdmi-qp: Provide .{enable|disable}_hpd() PHY ops Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` Cristian Ciocaltea [this message]
2026-06-04 3:33 ` Claude review: drm/bridge: dw-hdmi-qp: Add HDMI 2.0 SCDC scrambling support Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 15/30] drm/bridge: dw-hdmi-qp: Provide dw_hdmi_qp_hpd_notify() helper Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 16/30] drm/rockchip: dw_hdmi_qp: Add missing newlines in dev_err_probe() messages Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 17/30] drm/rockchip: dw_hdmi_qp: Use local dev variable consistently in bind() Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 18/30] drm/rockchip: dw_hdmi_qp: Drop unnecessary #include Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 19/30] drm/rockchip: dw_hdmi_qp: Defer HPD IRQ enable until after connector setup Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 20/30] drm/rockchip: dw_hdmi_qp: Mask HPD IRQ in rk3576_io_init() Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 21/30] drm/rockchip: dw_hdmi_qp: Implement .{enable|disable}_hpd() PHY ops Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 22/30] drm/rockchip: dw_hdmi_qp: Switch to dw_hdmi_qp_hpd_notify() Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 23/30] drm/bridge: dw-hdmi-qp: Remove obsolete .setup_hpd() phy op Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 24/30] drm/vc4: hdmi: Use common TMDS char rate constants Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 25/30] drm/vc4: hdmi: Convert to common HDMI 2.0 SCDC scrambling helpers Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: " Claude Code Review Bot
2026-06-01 22:44 ` [PATCH v7 26/30] drm/tests: connector: Add HDMI source-side scrambler capability tests Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 27/30] drm/tests: edid: Add 4K@60Hz EDID with 600MHz TMDS Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 28/30] drm/tests: hdmi_state_helper: Add HDMI 2.0 scrambling tests Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 29/30] drm/tests: edid: Fix conformity for 1080p+4K YUV420 200MHz EDID Cristian Ciocaltea
2026-06-01 22:44 ` [PATCH v7 30/30] drm/tests: edid: Fix conformity for 4K RGB/YUV 340MHz EDID Cristian Ciocaltea
2026-06-04 3:33 ` Claude review: Add HDMI 2.0 support to DW HDMI QP TX Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260602-dw-hdmi-qp-scramb-v7-14-445eb54ee1ed@collabora.com \
--to=cristian.ciocaltea@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.yan@rock-chips.com \
--cc=daniels@collabora.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=diederik@cknow-tech.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel-list@raspberrypi.com \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=maud_spierings@hotmail.com \
--cc=mcanal@igalia.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox