[PATCH v7 24/30] drm/vc4: hdmi: Use common TMDS char rate constants

[Cristian Ciocaltea <cristian.ciocaltea@collabora.com>]

Replace HDMI_14_MAX_TMDS_CLK defined locally with
HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ provided by linux/hdmi.h.  Note this
incorrectly referenced HDMI 1.4, as the 340 MHz maximum TMDS character
rate was actually introduced in HDMI 1.3.

Similarly, use HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ instead of the 600000000
magic number.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 74dce4be0c00..046ac4f43ba8 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -45,6 +45,7 @@
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/gpio/consumer.h>
+#include <linux/hdmi.h>
 #include <linux/i2c.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -113,8 +114,6 @@
 #define HSM_MIN_CLOCK_FREQ	120000000
 #define CEC_CLOCK_FREQ 40000
 
-#define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
-
 static bool vc4_hdmi_supports_scrambling(struct vc4_hdmi *vc4_hdmi)
 {
 	struct drm_display_info *display = &vc4_hdmi->connector.display_info;
@@ -137,7 +136,7 @@ static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
 {
 	unsigned long long clock = drm_hdmi_compute_mode_clock(mode, bpc, fmt);
 
-	return clock > HDMI_14_MAX_TMDS_CLK;
+	return clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ;
 }
 
 static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
@@ -1727,7 +1726,7 @@ vc4_hdmi_connector_clock_valid(const struct drm_connector *connector,
 	if (clock > vc4_hdmi->variant->max_pixel_clock)
 		return MODE_CLOCK_HIGH;
 
-	if (!vc4->hvs->vc5_hdmi_enable_hdmi_20 && clock > HDMI_14_MAX_TMDS_CLK)
+	if (!vc4->hvs->vc5_hdmi_enable_hdmi_20 && clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
 		return MODE_CLOCK_HIGH;
 
 	/* 4096x2160@60 is not reliable without overclocking core */
@@ -3253,7 +3252,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	 * vc4_hdmi_disable_scrambling() will thus run at boot, make
 	 * sure it's disabled, and avoid any inconsistency.
 	 */
-	if (variant->max_pixel_clock > HDMI_14_MAX_TMDS_CLK)
+	if (variant->max_pixel_clock > HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ)
 		vc4_hdmi->scdc_enabled = true;
 
 	ret = variant->init_resources(drm, vc4_hdmi);
@@ -3383,7 +3382,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
 	.encoder_type		= VC4_ENCODER_TYPE_HDMI0,
 	.debugfs_name		= "hdmi0_regs",
 	.card_name		= "vc4-hdmi-0",
-	.max_pixel_clock	= 600000000,
+	.max_pixel_clock	= HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
 	.registers		= vc5_hdmi_hdmi0_fields,
 	.num_registers		= ARRAY_SIZE(vc5_hdmi_hdmi0_fields),
 	.phy_lane_mapping	= {
@@ -3412,7 +3411,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
 	.encoder_type		= VC4_ENCODER_TYPE_HDMI1,
 	.debugfs_name		= "hdmi1_regs",
 	.card_name		= "vc4-hdmi-1",
-	.max_pixel_clock	= HDMI_14_MAX_TMDS_CLK,
+	.max_pixel_clock	= HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ,
 	.registers		= vc5_hdmi_hdmi1_fields,
 	.num_registers		= ARRAY_SIZE(vc5_hdmi_hdmi1_fields),
 	.phy_lane_mapping	= {
@@ -3441,7 +3440,7 @@ static const struct vc4_hdmi_variant bcm2712_hdmi0_variant = {
 	.encoder_type		= VC4_ENCODER_TYPE_HDMI0,
 	.debugfs_name		= "hdmi0_regs",
 	.card_name		= "vc4-hdmi-0",
-	.max_pixel_clock	= 600000000,
+	.max_pixel_clock	= HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
 	.registers		= vc6_hdmi_hdmi0_fields,
 	.num_registers		= ARRAY_SIZE(vc6_hdmi_hdmi0_fields),
 	.phy_lane_mapping	= {
@@ -3468,7 +3467,7 @@ static const struct vc4_hdmi_variant bcm2712_hdmi1_variant = {
 	.encoder_type		= VC4_ENCODER_TYPE_HDMI1,
 	.debugfs_name		= "hdmi1_regs",
 	.card_name		= "vc4-hdmi-1",
-	.max_pixel_clock	= 600000000,
+	.max_pixel_clock	= HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ,
 	.registers		= vc6_hdmi_hdmi1_fields,
 	.num_registers		= ARRAY_SIZE(vc6_hdmi_hdmi1_fields),
 	.phy_lane_mapping	= {

-- 
2.54.0