From: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
To: Jani Nikula <jani.nikula@linux.intel.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Daniel Stone <daniel@fooishbar.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
kernel@collabora.com,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Subject: [PATCH v5 2/4] drm/scdc-helper: Add scdc_status debugfs entry
Date: Thu, 04 Jun 2026 17:52:07 +0200 [thread overview]
Message-ID: <20260604-scdc-link-health-v5-2-11173b0ac3de@collabora.com> (raw)
In-Reply-To: <20260604-scdc-link-health-v5-0-11173b0ac3de@collabora.com>
SCDC provides status information on the current display link. At the
very least, it may be useful to expose this info through debugfs.
Add a debugfs entry for it under the connector, which displays a few
more details parsed out of the SCDC registers. A new
drm_scdc_debugfs_init function can be called by the connector
implementation to initialise the debugfs file.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
drivers/gpu/drm/display/drm_scdc_helper.c | 184 ++++++++++++++++++++++++++++++
include/drm/display/drm_scdc_helper.h | 32 ++++++
2 files changed, 216 insertions(+)
diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
index 8403f2390ab6..d98bcb8ce748 100644
--- a/drivers/gpu/drm/display/drm_scdc_helper.c
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -24,11 +24,14 @@
#include <linux/export.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
+#include <linux/overflow.h>
#include <drm/display/drm_scdc_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_device.h>
+#include <drm/drm_managed.h>
#include <drm/drm_print.h>
/**
@@ -55,6 +58,11 @@
#define SCDC_I2C_SLAVE_ADDRESS 0x54
+struct scdc_debugfs_priv {
+ struct drm_connector *connector;
+ struct drm_scdc_state state;
+};
+
/**
* drm_scdc_read - read a block of data from SCDC
* @adapter: I2C controller
@@ -276,3 +284,179 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector,
return true;
}
EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio);
+
+static void
+drm_scdc_parse_status0_flags(u8 val, struct drm_scdc_status_flags *flags)
+{
+ flags->clock_detected = val & SCDC_CLOCK_DETECT;
+ flags->ch0_locked = val & SCDC_CH0_LOCK;
+ flags->ch1_locked = val & SCDC_CH1_LOCK;
+ flags->ch2_locked = val & SCDC_CH2_LOCK;
+}
+
+static int drm_scdc_parse_error_counters(const u8 scdc[256], u16 counter[3])
+{
+ u8 sum = 0;
+ int i;
+
+ for (i = SCDC_ERR_DET_0_L; i <= SCDC_ERR_DET_CHECKSUM ; i++)
+ sum = wrapping_add(u8, sum, scdc[i]);
+
+ if (sum)
+ return -EPROTO;
+
+ for (i = 0; i < 3; i++) {
+ if (scdc[SCDC_ERR_DET_0_H + i * 2] & SCDC_CHANNEL_VALID)
+ counter[i] = (scdc[SCDC_ERR_DET_0_H + i * 2] &
+ ~SCDC_CHANNEL_VALID) << 8 |
+ scdc[SCDC_ERR_DET_0_L + i * 2];
+ else
+ counter[i] = 0;
+ }
+
+ return 0;
+}
+
+/**
+ * drm_scdc_read_state - Update state from SCDC
+ * @connector: pointer to a &struct drm_connector on which to operate on
+ * @state: pointer to a &struct drm_scdc_state to fill
+ *
+ * Reads the entire 256 byte SCDC state and parses it.
+ *
+ * Returns: %0 on success, negative errno on failure.
+ */
+int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *state)
+{
+ struct i2c_adapter *ddc;
+ struct drm_scdc *scdc;
+ u8 *buf = state->scdc;
+ int ret;
+
+ if (!state || !connector)
+ return -ENODEV;
+
+ scdc = &connector->display_info.hdmi.scdc;
+ ddc = connector->ddc;
+
+ if (!scdc->supported)
+ return -EOPNOTSUPP;
+
+ /* Read in 128-byte chunks, to work around DP<->HDMI converters with issues. */
+ ret = drm_scdc_read(ddc, 0, buf, 128);
+ if (ret)
+ return ret;
+
+ ret = drm_scdc_read(ddc, 127, &buf[127], 128);
+ if (ret)
+ return ret;
+
+ state->scrambling_enabled = buf[SCDC_TMDS_CONFIG] & SCDC_SCRAMBLING_ENABLE;
+ state->tmds_bclk_x40 = buf[SCDC_TMDS_CONFIG] & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
+
+ state->scrambling_detected = buf[SCDC_SCRAMBLER_STATUS] & SCDC_SCRAMBLING_STATUS;
+
+ drm_scdc_parse_status0_flags(buf[SCDC_STATUS_FLAGS_0], &state->stf);
+ ret = drm_scdc_parse_error_counters(buf, state->error_count);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read_state);
+
+#define scdc_print_str(_f, key, s) \
+ (seq_printf((_f), "%-30s: %s\n", (key), (s)))
+#define scdc_print_flag(_f, key, val) \
+ (scdc_print_str((_f), (key), str_yes_no((val))))
+#define scdc_print_dec(_f, key, val) \
+ (seq_printf((_f), "%-30s: %d\n", (key), (val)))
+
+static int scdc_status_show(struct seq_file *m, void *data)
+{
+ struct scdc_debugfs_priv *priv = m->private;
+ struct drm_scdc_state *st = &priv->state;
+ struct drm_connector *connector = priv->connector;
+ struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
+ int i, ret;
+
+ drm_connector_get(connector);
+
+ if (connector->status != connector_status_connected) {
+ ret = -ENODEV;
+ goto err_conn_put;
+ }
+
+ if (scdc->supported) {
+ ret = drm_scdc_read_state(connector, st);
+ if (ret)
+ goto err_conn_put;
+
+ for (i = 0; i < ARRAY_SIZE(st->scdc); i += 16)
+ seq_printf(m, "%*ph\n", 16, &st->scdc[i]);
+
+ seq_puts(m, "\n----------------\n\n");
+ }
+
+ scdc_print_flag(m, "SCDC Supported", scdc->supported);
+ if (!scdc->supported) {
+ ret = 0;
+ goto err_conn_put;
+ }
+
+ scdc_print_flag(m, "Sink Read Request Capable", scdc->read_request);
+ scdc_print_flag(m, "Scrambling Supported", scdc->scrambling.supported);
+ scdc_print_flag(m, "Low Rate Scrambling Supported", scdc->scrambling.low_rates);
+
+ drm_connector_put(connector);
+
+ scdc_print_flag(m, "Scrambling Enabled", st->scrambling_enabled);
+ scdc_print_flag(m, "Scrambling Detected", st->scrambling_detected);
+
+ if (st->tmds_bclk_x40)
+ scdc_print_str(m, "TMDS Bit Clock Ratio", "1/40");
+ else
+ scdc_print_str(m, "TMDS Bit Clock Ratio", "1/10");
+
+ scdc_print_flag(m, "Clock Detected", st->stf.clock_detected);
+ scdc_print_flag(m, "Channel 0 Locked", st->stf.ch0_locked);
+ scdc_print_flag(m, "Channel 1 Locked", st->stf.ch1_locked);
+ scdc_print_flag(m, "Channel 2 Locked", st->stf.ch2_locked);
+
+ scdc_print_dec(m, "Channel 0 Errors", st->error_count[0]);
+ scdc_print_dec(m, "Channel 1 Errors", st->error_count[1]);
+ scdc_print_dec(m, "Channel 2 Errors", st->error_count[2]);
+
+ return 0;
+
+err_conn_put:
+ drm_connector_put(connector);
+
+ return ret;
+}
+DEFINE_SHOW_ATTRIBUTE(scdc_status);
+
+/**
+ * drm_scdc_debugfs_init - Initialize scdc files in connector debugfs
+ * @connector: pointer to &struct drm_connector to operate on
+ * @root: debugfs &struct dentry for the debugfs root of @connector
+ *
+ * Creates SCDC-related debugfs files for @connector. Must be called after
+ * @root is already created.
+ */
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root)
+{
+ struct scdc_debugfs_priv *priv;
+
+ if (!root || !connector)
+ return;
+
+ priv = drmm_kzalloc(connector->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return;
+
+ priv->connector = connector;
+
+ debugfs_create_file("scdc_status", 0444, root, priv, &scdc_status_fops);
+}
+EXPORT_SYMBOL(drm_scdc_debugfs_init);
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
index e9ccaeba56dd..e0b79d79e1ff 100644
--- a/include/drm/display/drm_scdc_helper.h
+++ b/include/drm/display/drm_scdc_helper.h
@@ -30,6 +30,34 @@
struct drm_connector;
struct i2c_adapter;
+struct dentry;
+
+struct drm_scdc_status_flags {
+ /* Status Register 0 */
+ bool clock_detected;
+ bool ch0_locked;
+ bool ch1_locked;
+ bool ch2_locked;
+};
+
+struct drm_scdc_state {
+ /** @stf: contents of the status flag registers */
+ struct drm_scdc_status_flags stf;
+ /** @scramling_enabled: true if TMDS scrambling is on */
+ bool scrambling_enabled;
+ /** @scrambling_detected: true if the sink actually detected scrambling */
+ bool scrambling_detected;
+ /**
+ * @tmds_bclk_x40: true if TMDS bit period is 1/40th of the TMDS
+ * clock period, false if it's 1/10th of the clock period.
+ */
+ bool tmds_bclk_x40;
+ /** @error_count: character error counts for each channel */
+ u16 error_count[3];
+
+ /** @scdc: raw SCDC data buffer */
+ u8 scdc[256];
+};
int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
size_t size);
@@ -77,4 +105,8 @@ bool drm_scdc_get_scrambling_status(struct drm_connector *connector);
bool drm_scdc_set_scrambling(struct drm_connector *connector, bool enable);
bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector, bool set);
+int drm_scdc_read_state(struct drm_connector *connector,
+ struct drm_scdc_state *state);
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root);
+
#endif
--
2.54.0
next prev parent reply other threads:[~2026-06-04 15:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 15:52 [PATCH v5 0/4] Add SCDC information to connector debugfs Nicolas Frattaroli
2026-06-04 15:52 ` [PATCH v5 1/4] drm/scdc-helper: Don't use ssize_t return type for scdc_read/write Nicolas Frattaroli
2026-06-04 20:21 ` Claude review: " Claude Code Review Bot
2026-06-04 15:52 ` Nicolas Frattaroli [this message]
2026-06-04 20:21 ` Claude review: drm/scdc-helper: Add scdc_status debugfs entry Claude Code Review Bot
2026-06-04 15:52 ` [PATCH v5 3/4] drm/display: bridge_connector: init scdc debugfs for HDMI Nicolas Frattaroli
2026-06-04 20:21 ` Claude review: " Claude Code Review Bot
2026-06-04 15:52 ` [PATCH v5 4/4] drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields Nicolas Frattaroli
2026-06-04 20:21 ` Claude review: " Claude Code Review Bot
2026-06-04 20:21 ` Claude review: Add SCDC information to connector debugfs Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260604-scdc-link-health-v5-2-11173b0ac3de@collabora.com \
--to=nicolas.frattaroli@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=daniel@fooishbar.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hverkuil+cisco@kernel.org \
--cc=jani.nikula@linux.intel.com \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox