Claude review: Re: [PATCH 1/2] dt-bindings: display/bridge: lt9211: Add drive-strength-microamp property

[Claude Code Review Bot <claude-review@example.com>]

Patch Review

**Looks good.** The binding addition is well-formed.

The enum lists 16 values matching the 16 hardware levels, and the default of 25 matches the existing hardcoded behavior. Placement within the `properties:` block (between `vccio-supply` and `ports`) is reasonable.

Minor points:

1. **Property name context**: `drive-strength-microamp` originates from the pinctrl generic bindings (`pincfg-node.yaml`). Using it directly on a bridge device node is somewhat unusual. DT binding maintainers may prefer a vendor-prefixed property like `lontium,drive-strength-microamp`, or may be fine with it since the semantics are a natural fit. Worth confirming with Rob Herring / Krzysztof.

2. **Units**: As noted above, 12-36 uA is extremely low for LVDS drive current. If these values actually represent milliamps, the property name and all values would need correction. The commit message says "12 uA to 36 uA" — please verify against the datasheet.

3. **Example DT**: The binding example does not show usage of the new property. While optional, adding `drive-strength-microamp = <25>;` to the existing example would serve as documentation.

---
Generated by Claude Code Patch Reviewer