[PATCH RFT 0/5] drm/msm: Attach a driver to GMU

[Akhil P Oommen <akhilpo@oss.qualcomm.com>]

With the introduction of sync_state in the genpd framework, any consumer
device of GCC and GPUCC which is not bound to a driver will result in
bootup warnings like below:

[   24.362666] gcc-kaanapali 100000.clock-controller: sync_state() pending due to 3d37000.gmu
[   24.371210] gxclkctl-kaanapali 3d64000.clock-controller: sync_state() pending due to 3d37000.gmu
[   24.380268] gpucc-kaanapali 3d90000.clock-controller: sync_state() pending due to 3d37000.gmu

To silence these warnings and also to have a proper state in driver core,
attach a driver to the GMU and set it up as a component device for the drm
master device.

The first few patches are preparatory fixes and refactorings. And the
final patch introduces a driver for GMU devices.

Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
---
Akhil P Oommen (5):
      drm/msm/adreno/a6xx: Mark cxpd device_link as stateless
      drm/msm: Centralize the standalone drm device check for GPU
      drm/msm/adreno: Fix invalid drvdata typecast in adreno_remove()
      drm/msm: Always use component model for standalone GPU
      drm/msm: Attach a driver to the GMU

 drivers/gpu/drm/msm/adreno/a6xx_gmu.c      | 76 ++++++++++++++++++++++++++++--
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c      | 30 +++++-------
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h      |  3 --
 drivers/gpu/drm/msm/adreno/adreno_device.c | 27 +++++++----
 drivers/gpu/drm/msm/adreno/adreno_gpu.h    |  3 +-
 drivers/gpu/drm/msm/msm_drv.c              | 49 ++++++++++++++-----
 drivers/gpu/drm/msm/msm_drv.h              |  8 ++--
 7 files changed, 143 insertions(+), 53 deletions(-)
---
base-commit: bb1459368dd795c43380057523f571d5eb0ddded
change-id: 20260511-gmu-sync-state-fix-bc6b2d809371

Best regards,
-- 
Akhil P Oommen <akhilpo@oss.qualcomm.com>