From: Jérôme de Bretagne via B4 Relay <devnull+jerome.debretagne.gmail.com@kernel.org>
To: Douglas Anderson <dianders@chromium.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
Jérôme de Bretagne <jerome.debretagne@gmail.com>,
Bartosz Golaszewski <brgl@kernel.org>
Subject: [PATCH 09/11] arm64: dts: qcom: sc8280xp-arcata: model the PMU of the on-board wcn6855
Date: Wed, 20 May 2026 18:40:13 +0200 [thread overview]
Message-ID: <20260520-surface-sp9-5g-for-next-v1-9-9df52552bf87@gmail.com> (raw)
In-Reply-To: <20260520-surface-sp9-5g-for-next-v1-0-9df52552bf87@gmail.com>
From: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Align the Surface Pro 9 5G with the other sc8280xp-based models as done in
this patch series [1] from Bartosz.
Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
and bluetooth nodes to consume the PMU's outputs.
With this we can drop the regulator-always-on properties from vreg_s11b
and vreg_s12b as they will now be enabled by the power sequencing
driver.
Use the fixed BT vddrfa1p7-supply supply name to align with bindings.
[1] https://lore.kernel.org/all/20241018-sc8280xp-pwrseq-v6-0-8da8310d9564@linaro.org/
Cc: Bartosz Golaszewski <brgl@kernel.org>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
---
.../boot/dts/qcom/sc8280xp-microsoft-arcata.dts | 103 ++++++++++++++++++---
1 file changed, 89 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index 4daff3a0ecf48ad2081a2fe98910adf0debef88f..52d8e9527bd26f97305905650e2486a59e6d7157 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -357,6 +357,70 @@ usb1_sbu_mux: endpoint {
};
};
};
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&bt_default>, <&wlan_en>;
+ pinctrl-names = "default";
+
+ wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_s10b>;
+ vddaon-supply = <&vreg_s12b>;
+ vddpmu-supply = <&vreg_s12b>;
+ vddpmumx-supply = <&vreg_s12b>;
+ vddpmucx-supply = <&vreg_s12b>;
+ vddrfa0p95-supply = <&vreg_s12b>;
+ vddrfa1p3-supply = <&vreg_s11b>;
+ vddrfa1p9-supply = <&vreg_s1c>;
+ vddpcie1p3-supply = <&vreg_s11b>;
+ vddpcie1p9-supply = <&vreg_s1c>;
+
+ regulators {
+ vreg_pmu_rfa_cmn_0p8: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn_0p8";
+ };
+
+ vreg_pmu_aon_0p8: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p8";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p8: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p8";
+ };
+
+ vreg_pmu_btcmx_0p8: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p8";
+ };
+
+ vreg_pmu_pcie_1p8: ldo5 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo6 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_rfa_0p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo8 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo9 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+ };
+ };
};
&apps_rsc {
@@ -383,7 +447,6 @@ vreg_s11b: smps11 {
regulator-min-microvolt = <1272000>;
regulator-max-microvolt = <1272000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-always-on;
};
vreg_s12b: smps12 {
@@ -391,7 +454,6 @@ vreg_s12b: smps12 {
regulator-min-microvolt = <984000>;
regulator-max-microvolt = <984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- regulator-always-on;
};
vreg_l3b: ldo3 {
@@ -653,6 +715,16 @@ wifi@0 {
compatible = "pci17cb,1103";
reg = <0x10000 0x0 0x0 0x0 0x0>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
qcom,calibration-variant = "MS_SP9_5G";
};
};
@@ -837,20 +909,16 @@ &uart2 {
bluetooth {
compatible = "qcom,wcn6855-bt";
- vddio-supply = <&vreg_s10b>;
- vddbtcxmx-supply = <&vreg_s12b>;
- vddrfacmn-supply = <&vreg_s12b>;
- vddrfa0p8-supply = <&vreg_s12b>;
- vddrfa1p2-supply = <&vreg_s11b>;
- vddrfa1p7-supply = <&vreg_s1c>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
max-speed = <3200000>;
-
- enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
- swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&bt_default>;
- pinctrl-names = "default";
};
};
@@ -1201,4 +1269,11 @@ reset-pins {
bias-disable;
};
};
+
+ wlan_en: wlan-en-state {
+ pins = "gpio134";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
};
--
2.47.3
next prev parent reply other threads:[~2026-05-20 16:40 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-20 16:40 [PATCH 00/11] Microsoft Surface Pro 9 5G update Jérôme de Bretagne via B4 Relay
2026-05-20 16:40 ` [PATCH 01/11] drm/panel: edp: Add LG LP129WT232166 panel Jérôme de Bretagne via B4 Relay
2026-05-21 16:21 ` Doug Anderson
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 02/11] arm64: dts: qcom: sc8280xp-arcata: Enable backlight Jérôme de Bretagne via B4 Relay
2026-05-20 22:26 ` Jérôme de Bretagne
2026-05-21 8:48 ` Konrad Dybcio
2026-05-21 17:57 ` Jérôme de Bretagne
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 03/11] arm64: dts: qcom: sc8280xp-arcata: Enable the eDP display Jérôme de Bretagne via B4 Relay
2026-05-21 8:50 ` Konrad Dybcio
2026-05-21 18:09 ` Jérôme de Bretagne
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 04/11] arm64: dts: qcom: sc8280xp-arcata: add USB-C orientation GPIOs Jérôme de Bretagne via B4 Relay
2026-05-21 8:52 ` Konrad Dybcio
2026-05-21 18:04 ` Jérôme de Bretagne
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 05/11] arm64: dts: qcom: sc8280xp-arcata: Fix top USB-C DP alt mode Jérôme de Bretagne via B4 Relay
2026-05-21 8:53 ` Konrad Dybcio
2026-05-21 17:59 ` Jérôme de Bretagne
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 06/11] arm64: dts: qcom: sc8280xp-arcata: Enable 4-lane DP support Jérôme de Bretagne via B4 Relay
2026-05-22 9:36 ` Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 07/11] arm64: dts: qcom: sc8280xp-arcata: Add volume up/down GPIO keys Jérôme de Bretagne via B4 Relay
2026-05-21 8:54 ` Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 08/11] arm64: dts: qcom: sc8280xp-arcata: Add lid switch Jérôme de Bretagne via B4 Relay
2026-05-21 8:54 ` Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` Jérôme de Bretagne via B4 Relay [this message]
2026-05-21 8:57 ` [PATCH 09/11] arm64: dts: qcom: sc8280xp-arcata: model the PMU of the on-board wcn6855 Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 10/11] arm64: dts: qcom: sc8280xp-arcata: Switch to uefi rtc offset Jérôme de Bretagne via B4 Relay
2026-05-21 8:57 ` Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-20 16:40 ` [PATCH 11/11] arm64: dts: qcom: sc8280xp-arcata: Drop duplicate DMIC supplies Jérôme de Bretagne via B4 Relay
2026-05-21 8:58 ` Konrad Dybcio
2026-05-25 11:20 ` Claude review: " Claude Code Review Bot
2026-05-25 11:20 ` Claude review: Microsoft Surface Pro 9 5G update Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260520-surface-sp9-5g-for-next-v1-9-9df52552bf87@gmail.com \
--to=devnull+jerome.debretagne.gmail.com@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jerome.debretagne@gmail.com \
--cc=jesszhan0024@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox