[PATCH RESEND v4 0/3] drm/bridge: sii9234: use extcon to detect cable attachment

[Henrik Grimler <henrik@grimler.se>]

Hi,

This series fixes so HDMI through the sii9234 MHL chip works when
cable is hotplugged, by making the MHL chip use extcon cable detection
functions. Patch 3, that actually implements the extcon parts, is heavily
inspired by commit 688838442147 ("drm/bridge/sii8620: use micro-USB
cable detection logic to detect MHL") by Maciej Purski.

Before these changes, HDMI only worked if cable was plugged in before
booting. If no cable was connected, then wlr-randr still showed HDMI
as connected, with 0x0 px, which confused at least some UIs (phosh)
and caused problems:
https://gitlab.gnome.org/World/Phosh/phosh/-/issues/828

Tested on exynos4412-i9305.

Best regards,
Henrik Grimler

Signed-off-by: Henrik Grimler <henrik@grimler.se>
---
Changes in v4:
- Collect tags
- Link to v3: https://lore.kernel.org/r/20250824-exynos4-sii9234-driver-v3-0-80849e716a37@grimler.se

Changes in v3:
- Fix return of dev_err_probe in patch 2 and patch 3, spotted by
  Dmitry and Marek respectively.
- Change to depends on EXTCON || !EXTCON instead of select
- Collect tags for patch 1 (not 3 since there were (minor) changes)
- Link to v2: https://lore.kernel.org/r/20250724-exynos4-sii9234-driver-v2-0-faee244f1d40@grimler.se

Changes in v2:
- Add dependency on extcon in patch 3. Issue reported by kernel test robot <lkp@intel.com>
- Link to v1: https://lore.kernel.org/r/20250721-exynos4-sii9234-driver-v1-0-2e47ed02f677@grimler.se

---
Henrik Grimler (3):
      drm/bridge: sii9234: fix some typos in comments and messages
      drm/bridge: sii9234: use dev_err_probe where applicable
      drm/bridge: sii9234: use extcon cable detection logic to detect MHL

 drivers/gpu/drm/bridge/Kconfig   |   1 +
 drivers/gpu/drm/bridge/sii9234.c | 124 +++++++++++++++++++++++++++++++--------
 2 files changed, 102 insertions(+), 23 deletions(-)
---
base-commit: a87fef0880c4f52769b5a3c2fc1b2d73aaa04eb3
change-id: 20231218-exynos4-sii9234-driver-d817d4b511d5

Best regards,
-- 
Henrik Grimler <henrik@grimler.se>