[PATCH RESEND v4 1/3] drm/bridge: sii9234: fix some typos in comments and messages

[Henrik Grimler <henrik@grimler.se>]

Fix spelling and formatting so that the code is easier to follow, and
so that it is more searchable.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Henrik Grimler <henrik@grimler.se>
---
v4: no changes
v3: collect tags
v2: no changes
---
 drivers/gpu/drm/bridge/sii9234.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii9234.c b/drivers/gpu/drm/bridge/sii9234.c
index bb1bed03eb5b..930117bbba87 100644
--- a/drivers/gpu/drm/bridge/sii9234.c
+++ b/drivers/gpu/drm/bridge/sii9234.c
@@ -339,7 +339,7 @@ static int sii9234_cbus_reset(struct sii9234 *ctx)
 	return sii9234_clear_error(ctx);
 }
 
-/* Require to chek mhl imformation of samsung in cbus_init_register */
+/* Require to check mhl information of samsung in cbus_init_register */
 static int sii9234_cbus_init(struct sii9234 *ctx)
 {
 	cbus_writeb(ctx, 0x07, 0xF2);
@@ -614,7 +614,7 @@ static void sii9234_cable_out(struct sii9234 *ctx)
 
 	disable_irq(to_i2c_client(ctx->dev)->irq);
 	tpi_writeb(ctx, TPI_DPD_REG, 0);
-	/* Turn on&off hpd festure for only QCT HDMI */
+	/* Turn on&off hpd feature for only QCT HDMI */
 	sii9234_hw_off(ctx);
 
 	ctx->state = ST_OFF;
@@ -708,7 +708,7 @@ static enum sii9234_state sii9234_rsen_change(struct sii9234 *ctx)
 {
 	int value;
 
-	/* Work_around code to handle wrong interrupt */
+	/* Workaround code to handle wrong interrupt */
 	if (ctx->state != ST_RGND_1K) {
 		dev_err(ctx->dev, "RSEN_HIGH without RGND_1K\n");
 		return ST_FAILURE;
@@ -723,9 +723,9 @@ static enum sii9234_state sii9234_rsen_change(struct sii9234 *ctx)
 	}
 	dev_dbg(ctx->dev, "RSEN lost\n");
 	/*
-	 * Once RSEN loss is confirmed,we need to check
-	 * based on cable status and chip power status,whether
-	 * it is SINK Loss(HDMI cable not connected, TV Off)
+	 * Once RSEN loss is confirmed, we need to check
+	 * based on cable status and chip power status, whether
+	 * it is SINK Loss (HDMI cable not connected, TV Off)
 	 * or MHL cable disconnection
 	 * TODO: Define the below mhl_disconnection()
 	 */
@@ -820,7 +820,7 @@ static int sii9234_init_resources(struct sii9234 *ctx,
 	int ret;
 
 	if (!ctx->dev->of_node) {
-		dev_err(ctx->dev, "not DT device\n");
+		dev_err(ctx->dev, "no DT device\n");
 		return -ENODEV;
 	}
 

-- 
2.54.0