Claude review: arm64: dts: ti: beagley-ai: Enable HDMI display and audio

[Claude Code Review Bot <claude-review@example.com>]

Patch Review

Board DTS enabling HDMI via IT66122 bridge on DSS1-VP1 with DPI output, plus HDMI audio via McASP1. Well structured with proper pinctrl, power supply, and interrupt configuration.

**Minor note**: The `assigned-clock-parents` comment:
```
assigned-clock-parents = <&k3_clks 241 2>, /* PLL 17 HDMI */
                         <&k3_clks 240 1>, /* PLL 18 DSI */
```
VP1 is used for HDMI but its parent is labeled "PLL 18 DSI" - this is just the PLL name, not a functional issue, but worth noting the clock routing might be less obvious to future readers.

No blocking issues.

---

**Summary**: The series is well-crafted with good separation of concerns. The main items to address:

1. **Patch 9**: Remove the `+ 0x0` in the regmap_write offset.
2. **Patch 12**: Consider using `pm_runtime_resume_and_get()` instead of `pm_runtime_get_sync()`. Also rename the misleading `err_put_node` label.
3. **Patch 14**: The syscon-on-simple-bus pattern may draw DT reviewer comments, though it appears to be an established TI pattern.

---
Generated by Claude Code Patch Reviewer