Claude review: drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

Claude review: drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

[Claude Code Review Bot]

Patch Review

This patch extends for HDMI 2.1's FRL mode, adding lane 3 support, FRL rate, FFE levels, and status flags 1/2. Several bugs here:

**1. BUG: Lane 3 error counter missing `SCDC_CHANNEL_VALID` check**

```c
if (num_lanes == 4)
    counter[3] = buf[ERR_DET_OFF(SCDC_ERR_DET_3_L)] |
                (buf[ERR_DET_OFF(SCDC_ERR_DET_3_H)] & ~SCDC_CHANNEL_VALID) << 8;
else
    counter[3] = 0;
```

Channels 0–2 check `if (buf[i + 1] & SCDC_CHANNEL_VALID)` before using the counter value, setting it to 0 if invalid. Lane 3 unconditionally uses the value. This should mirror the existing pattern:

```c
if (num_lanes == 4) {
    if (buf[ERR_DET_OFF(SCDC_ERR_DET_3_H)] & SCDC_CHANNEL_VALID)
        counter[3] = buf[ERR_DET_OFF(SCDC_ERR_DET_3_L)] |
                    (buf[ERR_DET_OFF(SCDC_ERR_DET_3_H)] & ~SCDC_CHANNEL_VALID) << 8;
    else
        counter[3] = 0;
}
```

**2. BUG: Lane 3 error counters not cleared on write-back**

After reading, the loop zeroes `buf[0..5]` (channels 0–2) and `buf[6]` (checksum), but `buf[7]` and `buf[8]` (lane 3) are left with their original read values. The subsequent write-back:

```c
return drm_scdc_write(connector->ddc, SCDC_ERR_DET_0_L, buf, buf_sz);
```

writes those un-cleared values back, so lane 3 counters are never reset. Add:

```c
buf[ERR_DET_OFF(SCDC_ERR_DET_3_L)] = 0;
buf[ERR_DET_OFF(SCDC_ERR_DET_3_H)] = 0;
```

before the write-back (and after extracting the counter value).

**3. Checksum scope for 4-lane case — verify against HDMI 2.1 spec**

```c
for (i = 0; i < buf_sz; i++)
    sum = wrapping_add(u8, sum, buf[i]);
```

For `buf_sz = 9` (4 lanes), this sums registers 0x50–0x58 including the lane 3 bytes. The HDMI 2.0 checksum at register 0x56 was designed to make bytes 0x50–0x56 sum to zero. If the HDMI 2.1 spec extends the checksum to cover 0x50–0x58, this is correct. If it doesn't, this will produce false `EPROTO` failures whenever lane 3 has non-zero error counts. Please verify this matches the HDMI 2.1 spec — the code should have a comment citing the relevant spec section.

**4. `drm_scdc_frl_rate_str` returns NULL in default case**

```c
default:
    return NULL;
```

This value is passed to `seq_printf` via `scdc_print_str` with `%s`. While the default case should be unreachable (all 4-bit values are covered by the enum), returning NULL for `%s` is a latent kernel-oops-in-waiting. Return `"(Unknown)"` instead, or add a `WARN_ON` and return a string.

**5. `drm_scdc_read_status1_2_flags` — same clear-before-read pattern**

```c
ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_FLT_UPDATE);
```

Same concern as patch 1's `drm_scdc_read_status0_flags` — the FLT_UPDATE flag is cleared before reading STATUS_FLAGS_1/2. For debugfs, fine; as a public API, document the behavior.

**6. Minor: `__pure` on `static inline` function**

```c
static inline __pure int drm_scdc_num_frl_lanes(enum drm_scdc_frl_rate rate)
```

`__pure` on a `static inline` is redundant — the compiler already has full visibility of the function body. It's harmless but unnecessary.

---

**Summary**: The series needs fixes for the lane 3 error counter bugs (missing valid check, missing clear-on-writeback), removal of the inappropriate comment, and ideally a spec citation for the 4-lane checksum scope. The bitfield portability concern should at least be acknowledged. The overall feature is useful and the design is sound.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

[Claude Code Review Bot]

Patch Review

This patch extends the HDMI 2.0 code for HDMI 2.1 FRL (Fixed Rate Link) support. Good approach of not requiring a version check since HDMI 2.0 sinks have reserved fields defined as 0.

**Error counter checksum with 4 lanes:** For 4-lane mode, the code reads 9 bytes (0x50-0x58) and checksums all of them:

```c
case 4:
    buf_sz = 9;
    break;
...
for (i = 0; i < buf_sz; i++)
    sum = wrapping_add(u8, sum, buf[i]);
```

The checksum register is at 0x56 (buf[6]). This assumes the HDMI 2.1 checksum at 0x56 covers registers 0x50-0x55 *and* 0x57-0x58 (all error detection registers). Please confirm this matches the CTA-861-H spec. If the checksum only covers 0x50-0x55 (the HDMI 2.0 range), the validation would fail when lane 3 has non-zero data, as bytes 0x57-0x58 would be summed but not included in the checksum calculation by the sink.

**Enum bitfield:**

```c
enum drm_scdc_frl_rate rate : 4;
u8 ffe_levels : 4;
```

Enum bitfields are a GCC/Clang extension, not standard C. This works in the kernel build environment but is worth noting. The 4-bit width is sufficient for the 0-15 value range since GCC treats this enum's underlying type as unsigned (all values are non-negative).

**`scdc_err_cnt_buf_idx` function:** This works correctly but is more complex than needed. Since the registers are at known offsets, a simpler computation would be `lane * 2` for lanes 0-2 and 7 for lane 3. The switch statement is clearer about the non-contiguous register layout though (checksum sits between lane 2 and lane 3), so it's a reasonable choice.

**`drm_scdc_frl_rate_str` has a `default: return NULL` case:**

```c
default:
    return NULL;
```

All 16 possible 4-bit values are covered by the switch cases (0-6 named, 7-15 reserved), so the `default` is unreachable. Returning `NULL` from a function whose result is passed directly to `seq_printf` via `scdc_print_str` would cause a NULL dereference if it were ever reached. Consider returning `"(Unknown)"` instead, or removing the default case entirely.

**FRL rate 0 → 3 lanes fallback:** The handling in `drm_scdc_read_state` is correct:

```c
num_lanes = drm_scdc_num_frl_lanes(state->rate);
if (num_lanes < 0)
    return num_lanes;
if (!num_lanes)
    num_lanes = 3;
```

When FRL is off (TMDS mode), defaulting to 3 lanes for the HDMI 2.0 error counters makes sense.

**Status register 1 bitfield name:** The field is called `flags` but now contains 4-bit training pattern values rather than individual boolean flags:

```c
struct {
    u8 ln0_training_pattern : 4;
    u8 ln1_training_pattern : 4;
} flags __packed;
```

Consider renaming it to something like `fields` to better reflect the content, since these are multi-bit values, not flags.

---
Generated by Claude Code Patch Reviewer

[PATCH v4 0/4] Add SCDC information to connector debugfs

[Nicolas Frattaroli]

HDMI uses the DDC I2C bus for communicating various bits of link status
out of band with the actual HDMI video signal. This information can be
useful for debugging issues like questionable cables sabotaged by feline
teeth, Enthusiast Grade cables made of cow fencing wire, and other such
problems that ruin one's media viewing plans.

Consequently, this series exposes various bits of pertinent information
from the SCDC protocol in an HDMI connector's debugfs. To continually
poll the link status, userspace can poll the debugfs file.

---
Changes in v4:
- Don't use C struct bitfields for parsing status flags. Switch to
  bitwise AND for boolean flags, and FIELD_GET for multi-bit values.
- Drop the superfluous !! and parens
- Drop the __pure attributes on static functions
- Initialise stack local arrays with {}, not { 0 }.
- I've kept the print macros and %-30s format. Reason being that I don't
  want to repeat the format specifier and str_yes_no(foo) a bunch, and I
  like the %-30s format because it means all values are aligned with the
  value of the longest field, which is 30 chars long.
- Link to v3: https://patch.msgid.link/20260526-scdc-link-health-v3-0-59e4a4aaead1@collabora.com

Changes in v3:
- Add patch to change return type of drm_scdc_read/write.
- Rework error counter reading to duplicate less code.
- Also check lane 3 counter valid flag when reading its error counter.
- Use memset to clear buf for error counters, rather than doing it in
  the loop.
- Make read_error_counters not accept 0 as num_lanes; fix it up in the
  caller instead.
- Link to v2: https://patch.msgid.link/20260520-scdc-link-health-v2-0-511af18cd64b@collabora.com

Changes in v2:
- Add HDMI 2.1 SCDC status reporting
- Link to v1: https://patch.msgid.link/20260415-scdc-link-health-v1-0-8e731e88eaf0@collabora.com

To: Jani Nikula <jani.nikula@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
To: Andrzej Hajda <andrzej.hajda@intel.com>
To: Neil Armstrong <neil.armstrong@linaro.org>
To: Robert Foss <rfoss@kernel.org>
To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
To: Jonas Karlman <jonas@kwiboo.se>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: Luca Ceresoli <luca.ceresoli@bootlin.com>
To: Daniel Stone <daniel@fooishbar.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel@collabora.com
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>

---
Nicolas Frattaroli (4):
      drm/scdc-helper: Don't use ssize_t return type for scdc_read/write
      drm/scdc-helper: Add scdc_status debugfs entry
      drm/display: bridge_connector: init scdc debugfs for HDMI
      drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

 drivers/gpu/drm/display/drm_bridge_connector.c |   4 +
 drivers/gpu/drm/display/drm_scdc_helper.c      | 377 ++++++++++++++++++++++++-
 include/drm/display/drm_scdc.h                 |  16 +-
 include/drm/display/drm_scdc_helper.h          | 105 ++++++-
 4 files changed, 493 insertions(+), 9 deletions(-)
---
base-commit: 971288d0e77f7a0d356287121ce549ab5dad570a
change-id: 20260413-scdc-link-health-89326013d96c

Best regards,
--  
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>

[PATCH v4 1/4] drm/scdc-helper: Don't use ssize_t return type for scdc_read/write

[Nicolas Frattaroli]

drm_scdc_read and drm_scdc_write, both of which are only used within
drm_scdc_helper (although exported), use a ssize_t as their return type.

This would make sense if they returned the number of bytes read/written
on success, and negative errno otherwise. However, they return 0 on
success.

Demote them to "int" as their return type, in order to avoid needlessly
using 64 bits when less suffices.

No functional change.

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/display/drm_scdc_helper.c | 8 ++++----
 include/drm/display/drm_scdc_helper.h     | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
index df878aad4a36..8403f2390ab6 100644
--- a/drivers/gpu/drm/display/drm_scdc_helper.c
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -67,8 +67,8 @@
  * Returns:
  * 0 on success, negative error code on failure.
  */
-ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
-		      size_t size)
+int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
+		  size_t size)
 {
 	int ret;
 	struct i2c_msg msgs[2] = {
@@ -107,8 +107,8 @@ EXPORT_SYMBOL(drm_scdc_read);
  * Returns:
  * 0 on success, negative error code on failure.
  */
-ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
-		       const void *buffer, size_t size)
+int drm_scdc_write(struct i2c_adapter *adapter, u8 offset, const void *buffer,
+		   size_t size)
 {
 	struct i2c_msg msg = {
 		.addr = SCDC_I2C_SLAVE_ADDRESS,
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
index 34600476a1b9..e9ccaeba56dd 100644
--- a/include/drm/display/drm_scdc_helper.h
+++ b/include/drm/display/drm_scdc_helper.h
@@ -31,10 +31,10 @@
 struct drm_connector;
 struct i2c_adapter;
 
-ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
-		      size_t size);
-ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset,
-		       const void *buffer, size_t size);
+int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
+		  size_t size);
+int drm_scdc_write(struct i2c_adapter *adapter, u8 offset, const void *buffer,
+		   size_t size);
 
 /**
  * drm_scdc_readb - read a single byte from SCDC

-- 
2.54.0

[PATCH v4 2/4] drm/scdc-helper: Add scdc_status debugfs entry

[Nicolas Frattaroli]

SCDC provides status information on the current display link. At the
very least, it may be useful to expose this info through debugfs.

Add a debugfs entry for it under the connector, which displays a few
more details parsed out of the SCDC registers. A new
drm_scdc_debugfs_init function can be called by the connector
implementation to initialise the debugfs file.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/display/drm_scdc_helper.c | 237 ++++++++++++++++++++++++++++++
 include/drm/display/drm_scdc_helper.h     |  32 ++++
 2 files changed, 269 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
index 8403f2390ab6..7739fb5e77a1 100644
--- a/drivers/gpu/drm/display/drm_scdc_helper.c
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -24,11 +24,14 @@
 #include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/overflow.h>
 
 #include <drm/display/drm_scdc_helper.h>
 #include <drm/drm_connector.h>
 #include <drm/drm_device.h>
+#include <drm/drm_managed.h>
 #include <drm/drm_print.h>
 
 /**
@@ -55,6 +58,11 @@
 
 #define SCDC_I2C_SLAVE_ADDRESS 0x54
 
+struct scdc_debugfs_priv {
+	struct drm_connector *connector;
+	struct drm_scdc_state state;
+};
+
 /**
  * drm_scdc_read - read a block of data from SCDC
  * @adapter: I2C controller
@@ -276,3 +284,232 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector,
 	return true;
 }
 EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio);
+
+/**
+ * drm_scdc_read_status0_flags - Read SCDC "Status Flags" Register
+ * @connector: pointer to &struct drm_connector to issue the scdc request on
+ * @flags: pointer to the caller's &struct drm_scdc_status_flags to output to
+ *
+ * Reads the SCDC Status Flags 0 register, and outputs its contents to the
+ * destination @flags. Contents of @flags are only valid if function returns 0.
+ *
+ * Returns: %0 on success, negative errno on error.
+ */
+int drm_scdc_read_status0_flags(struct drm_connector *connector,
+				struct drm_scdc_status_flags *flags)
+{
+	int ret;
+	u8 val;
+
+	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_STATUS_UPDATE);
+	if (ret)
+		return ret;
+
+	ret = drm_scdc_readb(connector->ddc, SCDC_STATUS_FLAGS_0, &val);
+	if (ret)
+		return ret;
+
+	flags->clock_detected = val & SCDC_CLOCK_DETECT;
+	flags->ch0_locked = val & SCDC_CH0_LOCK;
+	flags->ch1_locked = val & SCDC_CH1_LOCK;
+	flags->ch2_locked = val & SCDC_CH2_LOCK;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read_status0_flags);
+
+/**
+ * drm_scdc_read_error_counters - Read and clear SCDC error counters
+ * @connector: pointer to &struct drm_connector to issue the scdc request on
+ * @counter: Caller's u16 array with 3 elements to write the counter values into
+ *
+ * Read the SCDC channel error counters. If the count of channel *n* is valid,
+ * write it into counter[n]. Otherwise, set counter[n] to 0. Reads all counters
+ * in one read chunk, then clears every counter, as is mandated.
+ *
+ * Returns: %0 on success, negative errno on error.
+ */
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3])
+{
+	u8 buf[7] = {};
+	int ret;
+	u8 sum = 0;
+	int i;
+
+	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_CED_UPDATE);
+	if (ret)
+		return ret;
+
+	ret = drm_scdc_read(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+	if (ret)
+		return ret;
+
+	/*
+	 * Verify the "checksum", i.e. sum up everything including the checksum
+	 * register as a wrapping unsigned 8-bit addition and verify it's 0.
+	 */
+	for (i = 0; i < ARRAY_SIZE(buf); i++)
+		sum = wrapping_add(u8, sum, buf[i]);
+
+	if (sum)
+		return -EPROTO;
+
+	for (i = 0; i < ARRAY_SIZE(buf) - 1; i += 2) {
+		if (buf[i + 1] & SCDC_CHANNEL_VALID)
+			counter[i / 2] = buf[i] | (buf[i + 1] & ~SCDC_CHANNEL_VALID) << 8;
+		else
+			counter[i / 2] = 0;
+
+		buf[i] = 0;
+		buf[i + 1] = 0;
+	}
+	buf[ARRAY_SIZE(buf) - 1] = 0;
+
+	return drm_scdc_write(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+}
+EXPORT_SYMBOL(drm_scdc_read_error_counters);
+
+/**
+ * drm_scdc_read_state - Update state from SCDC
+ * @connector: pointer to a &struct drm_connector on which to operate on
+ * @state: pointer to a &struct drm_scdc_state to fill
+ *
+ * Reads update flags from SCDC, and updates the parts of @state that SCDC
+ * claims have changed, as well as populating those where such a distinction
+ * can't be made.
+ *
+ * Returns: %0 on success, negative errno on failure.
+ */
+int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *state)
+{
+	u8 upd_flags[2] = {};
+	struct i2c_adapter *ddc;
+	struct drm_scdc *scdc;
+	int ret;
+	u8 val;
+
+	if (!state || !connector)
+		return -ENODEV;
+
+	scdc = &connector->display_info.hdmi.scdc;
+	ddc = connector->ddc;
+
+	if (!scdc->supported)
+		return -EOPNOTSUPP;
+
+	ret = drm_scdc_readb(ddc, SCDC_TMDS_CONFIG, &val);
+	if (ret)
+		return ret;
+
+	state->scrambling_enabled = val & SCDC_SCRAMBLING_ENABLE;
+	state->tmds_bclk_x40 = val & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40;
+
+	state->scrambling_detected = drm_scdc_get_scrambling_status(connector);
+
+	ret = drm_scdc_read(ddc, SCDC_UPDATE_0, &upd_flags, sizeof(upd_flags));
+	if (ret)
+		return ret;
+
+	if (upd_flags[0] & SCDC_STATUS_UPDATE) {
+		ret = drm_scdc_read_status0_flags(connector, &state->stf);
+		if (ret)
+			return ret;
+	}
+
+	if (upd_flags[0] & SCDC_CED_UPDATE) {
+		ret = drm_scdc_read_error_counters(connector, state->error_count);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read_state);
+
+#define scdc_print_str(_f, key, s) \
+	(seq_printf((_f), "%-30s: %s\n", (key), (s)))
+#define scdc_print_flag(_f, key, val) \
+	(scdc_print_str((_f), (key), str_yes_no((val))))
+#define scdc_print_dec(_f, key, val) \
+	(seq_printf((_f), "%-30s: %d\n", (key), (val)))
+
+static int scdc_status_show(struct seq_file *m, void *data)
+{
+	struct scdc_debugfs_priv *priv = m->private;
+	struct drm_scdc_state *st = &priv->state;
+	struct drm_connector *connector = priv->connector;
+	struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
+	int ret;
+
+	drm_connector_get(connector);
+
+	if (connector->status != connector_status_connected) {
+		ret = -ENODEV;
+		goto err_conn_put;
+	}
+
+	scdc_print_flag(m, "SCDC Supported", scdc->supported);
+	if (!scdc->supported) {
+		ret = 0;
+		goto err_conn_put;
+	}
+
+	scdc_print_flag(m, "Sink Read Request Capable", scdc->read_request);
+	scdc_print_flag(m, "Scrambling Supported", scdc->scrambling.supported);
+	scdc_print_flag(m, "Low Rate Scrambling Supported", scdc->scrambling.low_rates);
+
+	ret = drm_scdc_read_state(connector, st);
+	drm_connector_put(connector);
+	if (ret)
+		return ret;
+
+	scdc_print_flag(m, "Scrambling Enabled", st->scrambling_enabled);
+	scdc_print_flag(m, "Scrambling Detected", st->scrambling_detected);
+
+	if (st->tmds_bclk_x40)
+		scdc_print_str(m, "TMDS Bit Clock Ratio", "1/40");
+	else
+		scdc_print_str(m, "TMDS Bit Clock Ratio", "1/10");
+
+	scdc_print_flag(m, "Clock Detected", st->stf.clock_detected);
+	scdc_print_flag(m, "Channel 0 Locked", st->stf.ch0_locked);
+	scdc_print_flag(m, "Channel 1 Locked", st->stf.ch1_locked);
+	scdc_print_flag(m, "Channel 2 Locked", st->stf.ch2_locked);
+
+	scdc_print_dec(m, "Channel 0 Errors", st->error_count[0]);
+	scdc_print_dec(m, "Channel 1 Errors", st->error_count[1]);
+	scdc_print_dec(m, "Channel 2 Errors", st->error_count[2]);
+
+	return 0;
+
+err_conn_put:
+	drm_connector_put(connector);
+
+	return ret;
+}
+DEFINE_SHOW_ATTRIBUTE(scdc_status);
+
+/**
+ * drm_scdc_debugfs_init - Initialize scdc files in connector debugfs
+ * @connector: pointer to &struct drm_connector to operate on
+ * @root: debugfs &struct dentry for the debugfs root of @connector
+ *
+ * Creates SCDC-related debugfs files for @connector. Must be called after
+ * @root is already created.
+ */
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root)
+{
+	struct scdc_debugfs_priv *priv;
+
+	if (!root || !connector)
+		return;
+
+	priv = drmm_kzalloc(connector->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return;
+
+	priv->connector = connector;
+
+	debugfs_create_file("scdc_status", 0444, root, priv, &scdc_status_fops);
+}
+EXPORT_SYMBOL(drm_scdc_debugfs_init);
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
index e9ccaeba56dd..3b3a4e0e48ba 100644
--- a/include/drm/display/drm_scdc_helper.h
+++ b/include/drm/display/drm_scdc_helper.h
@@ -30,6 +30,31 @@
 
 struct drm_connector;
 struct i2c_adapter;
+struct dentry;
+
+struct drm_scdc_status_flags {
+	/* Status Register 0 */
+	bool clock_detected;
+	bool ch0_locked;
+	bool ch1_locked;
+	bool ch2_locked;
+};
+
+struct drm_scdc_state {
+	/** @stf: contents of the status flag registers */
+	struct drm_scdc_status_flags stf;
+	/** @scramling_enabled: true if TMDS scrambling is on */
+	bool scrambling_enabled;
+	/** @scrambling_detected: true if the sink actually detected scrambling */
+	bool scrambling_detected;
+	/**
+	 * @tmds_bclk_x40: true if TMDS bit period is 1/40th of the TMDS
+	 * clock period, false if it's 1/10th of the clock period.
+	 */
+	bool tmds_bclk_x40;
+	/** @error_count: character error counts for each channel */
+	u16 error_count[3];
+};
 
 int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
 		  size_t size);
@@ -77,4 +102,11 @@ bool drm_scdc_get_scrambling_status(struct drm_connector *connector);
 bool drm_scdc_set_scrambling(struct drm_connector *connector, bool enable);
 bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector, bool set);
 
+int drm_scdc_read_status0_flags(struct drm_connector *connector,
+				struct drm_scdc_status_flags *flags);
+int drm_scdc_read_state(struct drm_connector *connector,
+			struct drm_scdc_state *state);
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3]);
+void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root);
+
 #endif

-- 
2.54.0

[PATCH v4 3/4] drm/display: bridge_connector: init scdc debugfs for HDMI

[Nicolas Frattaroli]

On drm_bridge_connectors that contain an HDMI bridge, initialise the
SCDC debugfs entry under the connector's debugfs root.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/display/drm_bridge_connector.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c
index 649969fca141..8c2c890bd95d 100644
--- a/drivers/gpu/drm/display/drm_bridge_connector.c
+++ b/drivers/gpu/drm/display/drm_bridge_connector.c
@@ -25,6 +25,7 @@
 #include <drm/display/drm_hdmi_cec_helper.h>
 #include <drm/display/drm_hdmi_helper.h>
 #include <drm/display/drm_hdmi_state_helper.h>
+#include <drm/display/drm_scdc_helper.h>
 
 /**
  * DOC: overview
@@ -263,6 +264,9 @@ static void drm_bridge_connector_debugfs_init(struct drm_connector *connector,
 		if (bridge->funcs->debugfs_init)
 			bridge->funcs->debugfs_init(bridge, root);
 	}
+
+	if (bridge_connector->bridge_hdmi)
+		drm_scdc_debugfs_init(connector, root);
 }
 
 static void drm_bridge_connector_reset(struct drm_connector *connector)

-- 
2.54.0

[PATCH v4 4/4] drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

[Nicolas Frattaroli]

HDMI 2.1 redefines previously reserved fields in SCDC for various new
uses. No version check needs to be performed, as an HDMI 2.0 sink's
reserved SCDC fields are well-defined to be 0, and any zero-ness of
these fields for an HDMI 2.0 sink is not a surprise for SCDC parsers for
HDMI 2.1.

Implement reading and outputting these fields over debugfs.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/display/drm_scdc_helper.c | 164 +++++++++++++++++++++++++++---
 include/drm/display/drm_scdc.h            |  16 ++-
 include/drm/display/drm_scdc_helper.h     |  71 ++++++++++++-
 3 files changed, 231 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_scdc_helper.c b/drivers/gpu/drm/display/drm_scdc_helper.c
index 7739fb5e77a1..6e2ad335296e 100644
--- a/drivers/gpu/drm/display/drm_scdc_helper.c
+++ b/drivers/gpu/drm/display/drm_scdc_helper.c
@@ -21,6 +21,7 @@
  * DEALINGS IN THE SOFTWARE.
  */
 
+#include <linux/bitfield.h>
 #include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
@@ -63,6 +64,38 @@ struct scdc_debugfs_priv {
 	struct drm_scdc_state state;
 };
 
+static const char *drm_scdc_frl_rate_str(enum drm_scdc_frl_rate rate)
+{
+	switch (rate) {
+	case SCDC_FRL_RATE_OFF:
+		return "Off";
+	case SCDC_FRL_RATE_3X3:
+		return "3 Gbit/s x 3 lanes";
+	case SCDC_FRL_RATE_6X3:
+		return "6 Gbit/s x 3 lanes";
+	case SCDC_FRL_RATE_6X4:
+		return "6 Gbit/s x 4 lanes";
+	case SCDC_FRL_RATE_8X4:
+		return "8 Gbit/s x 4 lanes";
+	case SCDC_FRL_RATE_10X4:
+		return "10 Gbit/s x 4 lanes";
+	case SCDC_FRL_RATE_12X4:
+		return "12 Gbit/s x 4 lanes";
+	case SCDC_FRL_RATE_RESV_7:
+	case SCDC_FRL_RATE_RESV_8:
+	case SCDC_FRL_RATE_RESV_9:
+	case SCDC_FRL_RATE_RESV_10:
+	case SCDC_FRL_RATE_RESV_11:
+	case SCDC_FRL_RATE_RESV_12:
+	case SCDC_FRL_RATE_RESV_13:
+	case SCDC_FRL_RATE_RESV_14:
+	case SCDC_FRL_RATE_RESV_15:
+		return "(Reserved)";
+	default:
+		return NULL;
+	}
+}
+
 /**
  * drm_scdc_read - read a block of data from SCDC
  * @adapter: I2C controller
@@ -313,15 +346,72 @@ int drm_scdc_read_status0_flags(struct drm_connector *connector,
 	flags->ch0_locked = val & SCDC_CH0_LOCK;
 	flags->ch1_locked = val & SCDC_CH1_LOCK;
 	flags->ch2_locked = val & SCDC_CH2_LOCK;
+	flags->ln3_locked = val & SCDC_LN3_LOCK;
+	flags->flt_ready = val & SCDC_FLT_READY;
+	flags->dsc_fail = val & SCDC_DSC_FAIL;
 
 	return 0;
 }
 EXPORT_SYMBOL(drm_scdc_read_status0_flags);
 
+/**
+ * drm_scdc_read_status1_2_flags - Read SCDC "Status Flags" 1 and 2 Registers
+ * @connector: pointer to &struct drm_connector to issue the scdc request on
+ * @flags: pointer to the caller's &struct drm_scdc_status_flags to output to
+ *
+ * Reads the SCDC Status Flags 1 and 2 registers, and outputs their contents to
+ * the destination @flags. Contents of @flags are only valid if function returns
+ * 0.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int drm_scdc_read_status1_2_flags(struct drm_connector *connector,
+				  struct drm_scdc_status_flags *flags)
+{
+	u8 val[2] = {};
+	int ret;
+
+	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_FLT_UPDATE);
+	if (ret)
+		return ret;
+
+	ret = drm_scdc_read(connector->ddc, SCDC_STATUS_FLAGS_1, val, 2);
+	if (ret)
+		return ret;
+
+	flags->ln0_training_pattern = FIELD_GET(SCDC_LN_EVEN_TRAIN_PTRN, val[0]);
+	flags->ln1_training_pattern = FIELD_GET(SCDC_LN_ODD_TRAIN_PTRN, val[0]);
+
+	flags->ln2_training_pattern = FIELD_GET(SCDC_LN_EVEN_TRAIN_PTRN, val[1]);
+	flags->ln3_training_pattern = FIELD_GET(SCDC_LN_ODD_TRAIN_PTRN, val[1]);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_scdc_read_status1_2_flags);
+
+#define ERR_DET_OFF(x) ((x) - SCDC_ERR_DET_0_L)
+
+static int scdc_err_cnt_buf_idx(unsigned int lane)
+{
+	switch (lane) {
+	case 0:
+		return ERR_DET_OFF(SCDC_ERR_DET_0_L);
+	case 1:
+		return ERR_DET_OFF(SCDC_ERR_DET_1_L);
+	case 2:
+		return ERR_DET_OFF(SCDC_ERR_DET_2_L);
+	case 3:
+		return ERR_DET_OFF(SCDC_ERR_DET_3_L);
+	default:
+		return -EINVAL;
+	}
+}
+
 /**
  * drm_scdc_read_error_counters - Read and clear SCDC error counters
  * @connector: pointer to &struct drm_connector to issue the scdc request on
- * @counter: Caller's u16 array with 3 elements to write the counter values into
+ * @counter: Caller's u16 array with 4 elements to write the counter values into
+ * @num_lanes: number of active lanes, either 3 or 4
  *
  * Read the SCDC channel error counters. If the count of channel *n* is valid,
  * write it into counter[n]. Otherwise, set counter[n] to 0. Reads all counters
@@ -329,18 +419,31 @@ EXPORT_SYMBOL(drm_scdc_read_status0_flags);
  *
  * Returns: %0 on success, negative errno on error.
  */
-int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3])
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[4],
+				 unsigned int num_lanes)
 {
-	u8 buf[7] = {};
+	unsigned int buf_sz;
+	u8 buf[9] = {};
 	int ret;
 	u8 sum = 0;
-	int i;
+	int i, idx;
+
+	switch (num_lanes) {
+	case 3:
+		buf_sz = 7;
+		break;
+	case 4:
+		buf_sz = 9;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	ret = drm_scdc_writeb(connector->ddc, SCDC_UPDATE_0, SCDC_CED_UPDATE);
 	if (ret)
 		return ret;
 
-	ret = drm_scdc_read(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+	ret = drm_scdc_read(connector->ddc, SCDC_ERR_DET_0_L, buf, buf_sz);
 	if (ret)
 		return ret;
 
@@ -348,24 +451,23 @@ int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3]
 	 * Verify the "checksum", i.e. sum up everything including the checksum
 	 * register as a wrapping unsigned 8-bit addition and verify it's 0.
 	 */
-	for (i = 0; i < ARRAY_SIZE(buf); i++)
+	for (i = 0; i < buf_sz; i++)
 		sum = wrapping_add(u8, sum, buf[i]);
 
 	if (sum)
 		return -EPROTO;
 
-	for (i = 0; i < ARRAY_SIZE(buf) - 1; i += 2) {
-		if (buf[i + 1] & SCDC_CHANNEL_VALID)
-			counter[i / 2] = buf[i] | (buf[i + 1] & ~SCDC_CHANNEL_VALID) << 8;
+	for (i = 0; i < num_lanes; i++) {
+		idx = scdc_err_cnt_buf_idx(i);
+		if (buf[idx + 1] & SCDC_CHANNEL_VALID)
+			counter[i] = buf[idx] | (buf[idx + 1] & ~SCDC_CHANNEL_VALID) << 8;
 		else
-			counter[i / 2] = 0;
-
-		buf[i] = 0;
-		buf[i + 1] = 0;
+			counter[i] = 0;
 	}
-	buf[ARRAY_SIZE(buf) - 1] = 0;
 
-	return drm_scdc_write(connector->ddc, SCDC_ERR_DET_0_L, buf, ARRAY_SIZE(buf));
+	memset(buf, 0, buf_sz);
+
+	return drm_scdc_write(connector->ddc, SCDC_ERR_DET_0_L, buf, buf_sz);
 }
 EXPORT_SYMBOL(drm_scdc_read_error_counters);
 
@@ -385,6 +487,7 @@ int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *
 	u8 upd_flags[2] = {};
 	struct i2c_adapter *ddc;
 	struct drm_scdc *scdc;
+	int num_lanes;
 	int ret;
 	u8 val;
 
@@ -406,6 +509,19 @@ int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *
 
 	state->scrambling_detected = drm_scdc_get_scrambling_status(connector);
 
+	ret = drm_scdc_readb(ddc, SCDC_CONFIG_1, &val);
+	if (ret)
+		return ret;
+
+	state->rate = FIELD_GET(SCDC_FRL_RATE, val);
+	num_lanes = drm_scdc_num_frl_lanes(state->rate);
+	if (num_lanes < 0)
+		return num_lanes;
+	if (!num_lanes)
+		num_lanes = 3;
+
+	state->ffe_levels = FIELD_GET(SCDC_FFE_LEVELS, val);
+
 	ret = drm_scdc_read(ddc, SCDC_UPDATE_0, &upd_flags, sizeof(upd_flags));
 	if (ret)
 		return ret;
@@ -416,8 +532,15 @@ int drm_scdc_read_state(struct drm_connector *connector, struct drm_scdc_state *
 			return ret;
 	}
 
+	if (upd_flags[0] & SCDC_FLT_UPDATE) {
+		ret = drm_scdc_read_status1_2_flags(connector, &state->stf);
+		if (ret)
+			return ret;
+	}
+
 	if (upd_flags[0] & SCDC_CED_UPDATE) {
-		ret = drm_scdc_read_error_counters(connector, state->error_count);
+		ret = drm_scdc_read_error_counters(connector, state->error_count,
+						   num_lanes);
 		if (ret)
 			return ret;
 	}
@@ -465,6 +588,8 @@ static int scdc_status_show(struct seq_file *m, void *data)
 
 	scdc_print_flag(m, "Scrambling Enabled", st->scrambling_enabled);
 	scdc_print_flag(m, "Scrambling Detected", st->scrambling_detected);
+	scdc_print_str(m, "FRL Rate", drm_scdc_frl_rate_str(st->rate));
+	scdc_print_dec(m, "FFE Levels", st->ffe_levels);
 
 	if (st->tmds_bclk_x40)
 		scdc_print_str(m, "TMDS Bit Clock Ratio", "1/40");
@@ -475,10 +600,17 @@ static int scdc_status_show(struct seq_file *m, void *data)
 	scdc_print_flag(m, "Channel 0 Locked", st->stf.ch0_locked);
 	scdc_print_flag(m, "Channel 1 Locked", st->stf.ch1_locked);
 	scdc_print_flag(m, "Channel 2 Locked", st->stf.ch2_locked);
+	if (drm_scdc_num_frl_lanes(st->rate) == 4)
+		scdc_print_flag(m, "Lane 3 Locked", st->stf.ln3_locked);
+
+	scdc_print_flag(m, "Sink Ready For Link Training", st->stf.flt_ready);
+	scdc_print_flag(m, "Sink Failed To Decode DSC", st->stf.dsc_fail);
 
 	scdc_print_dec(m, "Channel 0 Errors", st->error_count[0]);
 	scdc_print_dec(m, "Channel 1 Errors", st->error_count[1]);
 	scdc_print_dec(m, "Channel 2 Errors", st->error_count[2]);
+	if (drm_scdc_num_frl_lanes(st->rate) == 4)
+		scdc_print_dec(m, "Lane 3 Errors", st->error_count[3]);
 
 	return 0;
 
diff --git a/include/drm/display/drm_scdc.h b/include/drm/display/drm_scdc.h
index 3d58f37e8ed8..9e365a95828d 100644
--- a/include/drm/display/drm_scdc.h
+++ b/include/drm/display/drm_scdc.h
@@ -29,6 +29,7 @@
 #define SCDC_SOURCE_VERSION 0x02
 
 #define SCDC_UPDATE_0 0x10
+#define  SCDC_FLT_UPDATE (1 << 5)
 #define  SCDC_READ_REQUEST_TEST (1 << 2)
 #define  SCDC_CED_UPDATE (1 << 1)
 #define  SCDC_STATUS_UPDATE (1 << 0)
@@ -46,14 +47,24 @@
 #define SCDC_CONFIG_0 0x30
 #define  SCDC_READ_REQUEST_ENABLE (1 << 0)
 
+#define SCDC_CONFIG_1 0x31
+#define  SCDC_FRL_RATE   0x0f
+#define  SCDC_FFE_LEVELS 0xf0
+
 #define SCDC_STATUS_FLAGS_0 0x40
+#define  SCDC_DSC_FAIL (1 << 7)
+#define  SCDC_FLT_READY (1 << 6)
+#define  SCDC_LN3_LOCK (1 << 4)
 #define  SCDC_CH2_LOCK (1 << 3)
 #define  SCDC_CH1_LOCK (1 << 2)
 #define  SCDC_CH0_LOCK (1 << 1)
-#define  SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK)
+#define  SCDC_CH_LOCK_MASK (SCDC_LN3_LOCK | SCDC_CH2_LOCK | SCDC_CH1_LOCK | \
+			    SCDC_CH0_LOCK)
 #define  SCDC_CLOCK_DETECT (1 << 0)
 
 #define SCDC_STATUS_FLAGS_1 0x41
+#define  SCDC_LN_EVEN_TRAIN_PTRN 0x0f
+#define  SCDC_LN_ODD_TRAIN_PTRN 0xf0
 
 #define SCDC_ERR_DET_0_L 0x50
 #define SCDC_ERR_DET_0_H 0x51
@@ -65,6 +76,9 @@
 
 #define SCDC_ERR_DET_CHECKSUM 0x56
 
+#define SCDC_ERR_DET_3_L 0x57
+#define SCDC_ERR_DET_3_H 0x58
+
 #define SCDC_TEST_CONFIG_0 0xc0
 #define  SCDC_TEST_READ_REQUEST (1 << 7)
 #define  SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f)
diff --git a/include/drm/display/drm_scdc_helper.h b/include/drm/display/drm_scdc_helper.h
index 3b3a4e0e48ba..926acf282cd3 100644
--- a/include/drm/display/drm_scdc_helper.h
+++ b/include/drm/display/drm_scdc_helper.h
@@ -24,6 +24,7 @@
 #ifndef DRM_SCDC_HELPER_H
 #define DRM_SCDC_HELPER_H
 
+#include <linux/errno.h>
 #include <linux/types.h>
 
 #include <drm/display/drm_scdc.h>
@@ -38,8 +39,65 @@ struct drm_scdc_status_flags {
 	bool ch0_locked;
 	bool ch1_locked;
 	bool ch2_locked;
+	bool ln3_locked;
+	bool flt_ready;
+	bool dsc_fail;
+
+	/* Status Register 1 */
+	u8 ln0_training_pattern : 4;
+	u8 ln1_training_pattern : 4;
+
+	/* Status Register 2 */
+	u8 ln2_training_pattern : 4;
+	u8 ln3_training_pattern : 4;
+};
+
+enum drm_scdc_frl_rate {
+	SCDC_FRL_RATE_OFF = 0,
+	SCDC_FRL_RATE_3X3 = 1,
+	SCDC_FRL_RATE_6X3 = 2,
+	SCDC_FRL_RATE_6X4 = 3,
+	SCDC_FRL_RATE_8X4 = 4,
+	SCDC_FRL_RATE_10X4 = 5,
+	SCDC_FRL_RATE_12X4 = 6,
+	SCDC_FRL_RATE_RESV_7 = 7,
+	SCDC_FRL_RATE_RESV_8 = 8,
+	SCDC_FRL_RATE_RESV_9 = 9,
+	SCDC_FRL_RATE_RESV_10 = 10,
+	SCDC_FRL_RATE_RESV_11 = 11,
+	SCDC_FRL_RATE_RESV_12 = 12,
+	SCDC_FRL_RATE_RESV_13 = 13,
+	SCDC_FRL_RATE_RESV_14 = 14,
+	SCDC_FRL_RATE_RESV_15 = 15
 };
 
+/**
+ * drm_scdc_num_frl_lanes - get number of lanes for a given FRL rate
+ * @rate: one of &enum drm_scdc_frl_rate
+ *
+ * For a given @rate, return the number of lanes it uses.
+ *
+ * Returns: %-EINVAL if @rate is not a valid FRL rate, or the number of lanes
+ * for a given &enum drm_scdc_frl_rate on success (including %0 for "off")
+ */
+static inline __pure int drm_scdc_num_frl_lanes(enum drm_scdc_frl_rate rate)
+{
+	switch (rate) {
+	case SCDC_FRL_RATE_OFF:
+		return 0;
+	case SCDC_FRL_RATE_3X3:
+	case SCDC_FRL_RATE_6X3:
+		return 3;
+	case SCDC_FRL_RATE_6X4:
+	case SCDC_FRL_RATE_8X4:
+	case SCDC_FRL_RATE_10X4:
+	case SCDC_FRL_RATE_12X4:
+		return 4;
+	default:
+		return -EINVAL;
+	}
+}
+
 struct drm_scdc_state {
 	/** @stf: contents of the status flag registers */
 	struct drm_scdc_status_flags stf;
@@ -52,8 +110,12 @@ struct drm_scdc_state {
 	 * clock period, false if it's 1/10th of the clock period.
 	 */
 	bool tmds_bclk_x40;
-	/** @error_count: character error counts for each channel */
-	u16 error_count[3];
+	/** @rate: FRL rate set by the source */
+	enum drm_scdc_frl_rate rate : 4;
+	/** @ffe_levels: The FFE levels for @rate set by the source */
+	u8 ffe_levels : 4;
+	/** @error_count: character error counts for each channel/link */
+	u16 error_count[4];
 };
 
 int drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer,
@@ -104,9 +166,12 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct drm_connector *connector, bool se
 
 int drm_scdc_read_status0_flags(struct drm_connector *connector,
 				struct drm_scdc_status_flags *flags);
+int drm_scdc_read_status1_2_flags(struct drm_connector *connector,
+				  struct drm_scdc_status_flags *flags);
 int drm_scdc_read_state(struct drm_connector *connector,
 			struct drm_scdc_state *state);
-int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[3]);
+int drm_scdc_read_error_counters(struct drm_connector *connector, u16 counter[4],
+				 unsigned int num_lanes);
 void drm_scdc_debugfs_init(struct drm_connector *connector, struct dentry *root);
 
 #endif

-- 
2.54.0

Claude review: Add SCDC information to connector debugfs

[Claude Code Review Bot]

Overall Series Review

Subject: Add SCDC information to connector debugfs
Author: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Patches: 5
Reviewed: 2026-05-28T12:16:28.428232

---

This is a well-structured 4-patch series that exposes HDMI SCDC (Status and Control Data Channel) link health information through DRM connector debugfs. The series progresses logically: fix return types (patch 1), add HDMI 2.0 SCDC debugfs (patch 2), wire it into bridge connectors (patch 3), then extend for HDMI 2.1 fields (patch 4).

The code quality is good -- v4 changes show responsiveness to review feedback (dropping bitfield parsing, `__pure`, `!!` operators). The error counter checksum logic correctly handles the register layout gap between lane 2 and lane 3 (skipping the checksum register at 0x56). The connector ref-counting pattern in `scdc_status_show` is correct.

I have one moderate concern (training pattern values are read but never displayed in debugfs), a few minor nits, and otherwise this looks ready.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/scdc-helper: Don't use ssize_t return type for scdc_read/write

[Claude Code Review Bot]

Patch Review

**Verdict: Looks good.**

Straightforward cleanup. `drm_scdc_read` and `drm_scdc_write` return 0 on success or negative errno -- there's no reason for `ssize_t`. The change is consistent between the `.c` and `.h` files.

No issues.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/scdc-helper: Add scdc_status debugfs entry

[Claude Code Review Bot]

Patch Review

**Verdict: Minor issues.**

This is the bulk of the series. The overall architecture is clean: `drm_scdc_read_state` as the core state reader, separate `drm_scdc_read_status0_flags` and `drm_scdc_read_error_counters` for individual fields, and `scdc_status_show` as the debugfs presentation layer.

**1. Doc comment typo** in `drm_scdc_state`:

```c
/** @scramling_enabled: true if TMDS scrambling is on */
```
Should be `@scrambling_enabled`.

**2. Exported functions with no external callers yet**: `drm_scdc_read_status0_flags`, `drm_scdc_read_error_counters`, and `drm_scdc_read_state` are all `EXPORT_SYMBOL` and declared in the public header, but currently only used internally by `scdc_status_show`. If no driver is expected to call these directly soon, they could be `static` to reduce API surface. However, if the intent is to provide a public API for drivers that want to query SCDC state programmatically, then exporting proactively is fine -- just worth stating the intent.

**3. Status flag clear-before-read ordering**: `drm_scdc_read_status0_flags` writes `SCDC_STATUS_UPDATE` to clear the flag *before* reading the status register. The HDMI spec recommends reading the data first, then clearing the flag. For a debugfs polling interface this is fine in practice, but worth noting the deviation.

**4. Connector get/put pattern is correct**: The success path drops the ref after `drm_scdc_read_state` returns (before printing cached state), and the error path uses `err_conn_put`. Clean.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/display: bridge_connector: init scdc debugfs for HDMI

[Claude Code Review Bot]

Patch Review

**Verdict: Looks good.**

Trivially correct -- four lines that call `drm_scdc_debugfs_init` when `bridge_connector->bridge_hdmi` is present. The placement inside `drm_bridge_connector_debugfs_init` after the per-bridge `debugfs_init` calls is appropriate.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/scdc-helper: Implement parsing and printing HDMI 2.1 fields

[Claude Code Review Bot]

Patch Review

**Verdict: A couple of issues.**

The HDMI 2.1 extension is well done overall. The `scdc_err_cnt_buf_idx` helper correctly handles the register gap (lane 3 at 0x57-0x58, after checksum at 0x56). The FRL rate enum and helper are clean.

**1. Training patterns are read but never displayed** (moderate): `drm_scdc_read_status1_2_flags` reads `ln{0,1,2,3}_training_pattern` from status registers 1 and 2, and `drm_scdc_read_state` calls it when `SCDC_FLT_UPDATE` is set. However, `scdc_status_show` never prints these training pattern values. If the fields are worth reading and storing, they should be displayed in the debugfs output. Otherwise, there's no way for users to see them.

**2. `__pure` still present on `drm_scdc_num_frl_lanes`** despite the v4 changelog stating "Drop the __pure attributes on static functions":

```c
static inline __pure int drm_scdc_num_frl_lanes(enum drm_scdc_frl_rate rate)
```

The `__pure` attribute on a `static inline` function whose body is fully visible to the compiler is redundant -- GCC can already see it's a pure function. This is harmless but inconsistent with the stated v4 changes.

**3. Enum bitfield**: `enum drm_scdc_frl_rate rate : 4` in `drm_scdc_state` -- the signedness of enum bitfields is implementation-defined in C. With values 0-15 in the enum, a signed 4-bit field would misrepresent values 8-15. GCC infers unsigned for enums whose range fits in unsigned, so this works in practice, but it's a portability subtlety worth being aware of.

**4. `drm_scdc_frl_rate_str` returns `NULL` for the `default` case**: Since all 16 possible 4-bit values are covered by explicit cases (0-6 valid, 7-15 reserved), the `default` branch returning `NULL` is unreachable. If somehow hit, passing NULL to `seq_printf`'s `%s` would trigger a kernel warning. Consider returning `"(Unknown)"` instead of `NULL` for defensive safety, or drop the `default` case entirely.

---
Generated by Claude Code Patch Reviewer