[PATCH v2 4/8] drm/bridge: inno-hdmi: Use the common TMDS char rate constant

[Javier Martinez Canillas <javierm@redhat.com>]

Replace the driver local INNO_HDMI_MIN_TMDS_CLOCK define with the shared
constant defined in the <linux/hdmi.h> header.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v1)

 drivers/gpu/drm/bridge/inno-hdmi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/inno-hdmi.c b/drivers/gpu/drm/bridge/inno-hdmi.c
index 1091af29ad8f..5fa533a4eb34 100644
--- a/drivers/gpu/drm/bridge/inno-hdmi.c
+++ b/drivers/gpu/drm/bridge/inno-hdmi.c
@@ -31,8 +31,6 @@
 #include <drm/display/drm_hdmi_helper.h>
 #include <drm/display/drm_hdmi_state_helper.h>
 
-#define INNO_HDMI_MIN_TMDS_CLOCK  25000000U
-
 #define DDC_SEGMENT_ADDR		0x30
 
 #define HDMI_SCL_RATE			(100 * 1000)
@@ -820,7 +818,7 @@ static enum drm_mode_status inno_hdmi_bridge_mode_valid(struct drm_bridge *bridg
 
 	mpixelclk = mode->clock * 1000;
 
-	if (mpixelclk < INNO_HDMI_MIN_TMDS_CLOCK)
+	if (mpixelclk < HDMI_TMDS_CHAR_RATE_MIN_HZ)
 		return MODE_CLOCK_LOW;
 
 	if (inno_hdmi_find_phy_config(hdmi, mpixelclk) < 0)
-- 
2.54.0