Re: [PATCH 1/2] drm/panel: Enable DSC for Visionox VTDR6130 panel

[sashiko-bot@kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The panel driver DRM_PANEL_VISIONOX_VTDR6130 lacks Kconfig dependencies for DSC helpers, causing a linker error when compiled without them.
--

commit 2b76aa2af63143268815713af0dc4f51234d7f43
Author: Jun Nie <jun.nie@linaro.org>

drm/panel: Enable DSC for Visionox VTDR6130 panel

This commit enables display compression (DSC v1.2) for the 1080x2400 Visionox
VTDR6130 AMOLED DSI panel. It sets up the DSC configuration parameters and
sends the picture parameter set during panel initialization.

> diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> index 97a79411e1ecd..0cdcdbbc766da 100644
> --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
[ ... ]
> @@ -123,6 +128,9 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
>  	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
>  	mipi_dsi_msleep(&dsi_ctx, 20);
>  
> +	drm_dsc_pps_payload_pack(&pps, dsi->dsc);

[Severity: Low]
Will this cause a linker error if CONFIG_DRM_DISPLAY_DSC_HELPER is not enabled?

This adds a call to drm_dsc_pps_payload_pack(), but it doesn't appear to
update the Kconfig entry for DRM_PANEL_VISIONOX_VTDR6130 to select
DRM_DISPLAY_DSC_HELPER and DRM_DISPLAY_HELPER.

Could this lead to undefined reference errors during the build for
configurations where the panel is enabled but the helpers are not?

> +	mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
> +
>  	return dsi_ctx.accum_err;
>  }

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260604-topic-sm8x50-vtdr6130-dsc-v1-0-09bcd1dff1fb@linaro.org?part=1