Claude review: Improvements on RZ/G2L MIPI DSI driver

[Claude Code Review Bot <claude-review@example.com>]

Overall Series Review

Subject: Improvements on RZ/G2L MIPI DSI driver
Author: Biju <biju.das.au@gmail.com>
Patches: 4
Reviewed: 2026-03-31T17:20:05.256307

---

This is a well-structured 3-patch series that brings the RZ/G2L MIPI DSI driver into conformance with the hardware manual (Rev. 1.50, Section 34.4.2.1). The changes are:

1. Move display timing setup to after HS clock start
2. Fix the reset deassertion delay from 1 usec to 1 msec
3. Move CMN_RSTB deassert/assert to the correct points in the startup/stop sequence

The series is logically ordered and the patches are appropriately separated. Patches 1 and 2 carry Fixes tags and Cc: stable, which is appropriate. The overall approach is sound and the code changes are small and targeted.

**One concern spans patches 1 and 3**: the return value of `rzg2l_mipi_dsi_startup()` is silently dropped in `rzg2l_mipi_dsi_atomic_pre_enable()` after patch 1. This was already the case before patch 1 (the original code had `if (ret < 0) return;` which just returned void), but patch 1 makes it more explicit by removing the check entirely. This isn't a regression introduced by this series, but it's worth noting.

---

---
Generated by Claude Code Patch Reviewer