From: Claude Code Review Bot <claude-review@example.com>
To: dri-devel-reviews@example.com
Subject: Claude review: arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS
Date: Mon, 25 May 2026 18:25:01 +1000 [thread overview]
Message-ID: <review-patch2-20260522161105.277519-15-ivitro@gmail.com> (raw)
In-Reply-To: <20260522161105.277519-15-ivitro@gmail.com>
Patch Review
This overlay drives the same panel (LT170410-2WHC) but via the native AM62 OLDI output rather than a DSI bridge, for carrier boards like Mallow.
- The overlay correctly defines `pinctrl_i2s_2_d_in_gpio` and `pinctrl_i2s_2_sync_gpio` in `&main_pmx0` within the overlay itself. These pin controls are NOT in the base dtsi, so they must be defined here. This is correct — they're only needed when this specific overlay is applied.
- The `reg_3v3_lvds` fixed regulator has `regulator-name = "+V3.3_LVDS"` — good, this was a v3 fix.
- The touchscreen is on `&main_i2c2` (Verdin I2C_2_DSI), which is the correct bus for display touch on this platform.
- The `backlight-pwm2` uses `epwm0 1` (PWM_2 / SODIMM 16), while patch 1 uses `epwm1 0` (PWM_3_DSI / SODIMM 19). The different PWM channels match the different Verdin signal routing for LVDS vs DSI. Correct.
**No blocking issues.**
---
Generated by Claude Code Patch Reviewer
next prev parent reply other threads:[~2026-05-25 8:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 16:11 [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Vitor Soares
2026-05-22 16:11 ` [PATCH v3 01/11] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 02/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS Vitor Soares
2026-05-25 8:25 ` Claude Code Review Bot [this message]
2026-05-22 16:11 ` [PATCH v3 03/11] dt-bindings: vendor-prefixes: Add Riverdi Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 04/11] dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and RVT101HVLNWC00 Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 05/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 06/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 07/11] arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 08/11] arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 09/11] arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 10/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 11/11] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 17:05 ` [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Francesco Dolcini
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
-- strict thread matches above, loose matches on Subject: below --
2026-05-21 15:00 [PATCH v1 00/15] " Vitor Soares
2026-05-21 15:00 ` [PATCH v1 03/15] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS Vitor Soares
2026-05-25 9:56 ` Claude review: " Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=review-patch2-20260522161105.277519-15-ivitro@gmail.com \
--to=claude-review@example.com \
--cc=dri-devel-reviews@example.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox