From: Claude Code Review Bot <claude-review@example.com>
To: dri-devel-reviews@example.com
Subject: Claude review: arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS
Date: Mon, 25 May 2026 18:25:03 +1000 [thread overview]
Message-ID: <review-patch11-20260522161105.277519-24-ivitro@gmail.com> (raw)
In-Reply-To: <20260522161105.277519-24-ivitro@gmail.com>
Patch Review
This overlay is very similar to patch 2 (native LVDS) but targets the Mezzanine expansion board rather than the Mallow carrier. Key differences:
- Backlight enable uses `mcu_gpio0 4` (Verdin GPIO_4 / SODIMM 212) instead of `main_gpio0 34` (Verdin I2S_2_D_OUT / SODIMM 46). This matches the Mezzanine board's different LVDS backlight wiring.
- Touch interrupt/reset use `mcu_gpio0` pins 3 and 2 (Verdin GPIO_3/GPIO_2) instead of `main_gpio0` pins 37 and 33. Again matches the Mezzanine's different touch routing.
- The backlight node does **not** have `pinctrl-names`/`pinctrl-0` properties, unlike patch 2. This is correct because the `mcu_gpio0` pins don't require explicit pinmux configuration on AM62 (they default to GPIO function).
- The touchscreen node also lacks `pinctrl-names`/`pinctrl-0` for the same reason. Correct.
**No blocking issues.**
---
Generated by Claude Code Patch Reviewer
next prev parent reply other threads:[~2026-05-25 8:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 16:11 [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Vitor Soares
2026-05-22 16:11 ` [PATCH v3 01/11] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 02/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 03/11] dt-bindings: vendor-prefixes: Add Riverdi Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 04/11] dt-bindings: display: panel-lvds: Add Riverdi RVT70HSLNWCA0 and RVT101HVLNWC00 Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 05/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 06/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 07/11] arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 08/11] arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 09/11] arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 10/11] arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN Vitor Soares
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
2026-05-22 16:11 ` [PATCH v3 11/11] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Vitor Soares
2026-05-25 8:25 ` Claude Code Review Bot [this message]
2026-05-22 17:05 ` [PATCH v3 00/11] arm64: dts: ti: k3-am62-verdin: Add display and peripheral overlays Francesco Dolcini
2026-05-25 8:25 ` Claude review: " Claude Code Review Bot
-- strict thread matches above, loose matches on Subject: below --
2026-05-21 15:00 [PATCH v1 00/15] " Vitor Soares
2026-05-21 15:00 ` [PATCH v1 12/15] arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS Vitor Soares
2026-05-25 9:56 ` Claude review: " Claude Code Review Bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=review-patch11-20260522161105.277519-24-ivitro@gmail.com \
--to=claude-review@example.com \
--cc=dri-devel-reviews@example.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox