Claude review: dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup

Claude review: dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup

[Claude Code Review Bot]

Patch Review

Small and correct. Extends the compatible from `const` to `enum` to add the new `waveshare,dsi2lvds` variant.

**Minor:** Typo in commit message — "defailed" should be "detailed":
```
it is not defailed and it uses Waveshare prefix
```

Also the subject line says "dsp2dpi" but the file is `dsi2dpi` — though this matches the existing filename so it's fine as a reference, just slightly confusing.

No functional issues.

---
Generated by Claude Code Patch Reviewer

[PATCH v2 0/4] drm/panel: simple: add Waveshare LCD panels

[Dmitry Baryshkov]

Waveshare have a serie of DSI panel kits with the DPI or LVDS panel
being attached to the DSI2DPI or DSI2LVDS bridge. Commit 80b0eb11f8e0
("dt-bindings: display: panel: Add waveshare DPI panel support")
described two of them in the bindings and commit 46be11b678e0
("drm/panel: simple: Add Waveshare 13.3" panel support") added
definitions for one of those panels. Add support for the rest of them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Changes in v2:
- Updated waveshare,dsi2dpi schema to implicitly mention LVDS
  (Krzysztof)
- Updated commit message to explain why the ICN6202 / ICN6211 bridges
  are not a part of the DT bindings.
- Link to v1: https://patch.msgid.link/20260330-ws-lcd-v1-0-309834a435c0@oss.qualcomm.com

---
Dmitry Baryshkov (4):
      dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup
      drm/bridge: waveshare-dsi: support DSI LCD kits with LVDS panels
      dt-bindings: display: panel: add Waveshare LCD panels
      drm/panel: simple: add Waveshare LCD panels

 .../bindings/display/bridge/waveshare,dsi2dpi.yaml |   9 +-
 .../bindings/display/panel/panel-simple.yaml       |  28 ++
 drivers/gpu/drm/bridge/waveshare-dsi.c             |   5 +-
 drivers/gpu/drm/panel/panel-simple.c               | 381 +++++++++++++++++++++
 4 files changed, 418 insertions(+), 5 deletions(-)
---
base-commit: 3b058d1aeeeff27a7289529c4944291613b364e9
change-id: 20260330-ws-lcd-b65c03c5ac17

Best regards,
--  
With best wishes
Dmitry

[PATCH v2 1/4] dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup

[Dmitry Baryshkov]

Several the Waveshare DSI LCD panel kits use DSI2LVDS ICN6202 bridge
together with the LVDS panels. Define new compatible for the on-kit
bridge setup (it is not itmized and it uses Waveshare prefix since the
rest of the integration details are not known).

Note: the ICN6202 / ICN6211 bridges are completely handled by the board
itself, they should not be programmed by the host (which otherwise might
override correct params), etc. As such, it doesn't make sense to use
those in the compat strings. I consider those to be an internal detail
of the setup.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 .../devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml    | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml
index 3820dd7e11af..4d34a92192bf 100644
--- a/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml
@@ -10,11 +10,14 @@ maintainers:
   - Joseph Guo <qijian.guo@nxp.com>
 
 description:
-  Waveshare bridge board is part of Waveshare panel which converts DSI to DPI.
+  Waveshare bridge board is part of Waveshare panel which converts DSI to DPI
+  or LVDS.
 
 properties:
   compatible:
-    const: waveshare,dsi2dpi
+    enum:
+      - waveshare,dsi2dpi
+      - waveshare,dsi2lvds
 
   reg:
     maxItems: 1
@@ -53,7 +56,7 @@ properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
-          Video port for MIPI DPI output panel.
+          Video port for MIPI DPI or LVDS output to the panel.
 
     required:
       - port@0

-- 
2.47.3

[PATCH v2 2/4] drm/bridge: waveshare-dsi: support DSI LCD kits with LVDS panels

[Dmitry Baryshkov]

Several Waveshare DSI LCD kits use LVDS panels and the ICN6202 DSI2LVDS
bridge. Support that setup by handling waveshare,dsi2lvds compatible.
The only difference with the existing waveshare,dsi2dpi is the bridge's
output type (LVDS vs DPI).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/bridge/waveshare-dsi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/waveshare-dsi.c b/drivers/gpu/drm/bridge/waveshare-dsi.c
index 32d40414adb9..ded57f298d64 100644
--- a/drivers/gpu/drm/bridge/waveshare-dsi.c
+++ b/drivers/gpu/drm/bridge/waveshare-dsi.c
@@ -177,7 +177,7 @@ static int ws_bridge_probe(struct i2c_client *i2c)
 	regmap_write(ws->reg_map, 0xc2, 0x01);
 	regmap_write(ws->reg_map, 0xac, 0x01);
 
-	ws->bridge.type = DRM_MODE_CONNECTOR_DPI;
+	ws->bridge.type = (uintptr_t)i2c_get_match_data(i2c);
 	ws->bridge.of_node = dev->of_node;
 	devm_drm_bridge_add(dev, &ws->bridge);
 
@@ -185,7 +185,8 @@ static int ws_bridge_probe(struct i2c_client *i2c)
 }
 
 static const struct of_device_id ws_bridge_of_ids[] = {
-	{.compatible = "waveshare,dsi2dpi",},
+	{.compatible = "waveshare,dsi2dpi", .data = (void *)DRM_MODE_CONNECTOR_DPI, },
+	{.compatible = "waveshare,dsi2lvds", .data = (void *)DRM_MODE_CONNECTOR_LVDS, },
 	{ }
 };
 

-- 
2.47.3

[PATCH v2 3/4] dt-bindings: display: panel: add Waveshare LCD panels

[Dmitry Baryshkov]

Waveshare has a family of LVDS / DPI panels bundled with the DSI2DPI or
DSI2LVDS bridge. The bridge and the rest of the logic are covered by the
waveshare,dsi2dpi compatible. The bindings already include several
entries for the panels from this series (waveshare,13.3inch-panel,
waveshare,7.0inch-c-panel). Define compatible strings for the rest of
the panels from that series.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 .../bindings/display/panel/panel-simple.yaml       | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 9b8fa03f7cbc..c9ac59e04118 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -343,10 +343,38 @@ properties:
       - vivax,tpc9150-panel
         # VXT 800x480 color TFT LCD panel
       - vxt,vl050-8048nt-c01
+        # Waveshare 10.1" WXGA (1280x800) LCD panel
+      - waveshare,10.1inch-c-panel
+        # Waveshare 11.9" (320x1480) LCD panel
+      - waveshare,11.9inch-panel
         # Waveshare 13.3" FHD (1920x1080) LCD panel
       - waveshare,13.3inch-panel
+        # Waveshare 2.8" VGA (480x640) LCD panel
+      - waveshare,2.8inch-panel
+        # Waveshare 3.4" (800x800) LCD panel
+      - waveshare,3.4inch-c-panel
+        # Waveshare 4.0" WVGA (480x800) LCD panel
+      - waveshare,4.0inch-panel
+        # Waveshare 4.0" (720x720) LCD panel
+      - waveshare,4.0inch-c-panel
+        # Waveshare 5.0" WSVGA (1024x600) LCD panel
+      - waveshare,5.0inch-c-panel
+        # Waveshare 5.0" HD 720p (720x1280) LCD panel
+      - waveshare,5.0inch-d-panel
+        # Waveshare 6.25" (720x1560) LCD panel
+      - waveshare,6.25inch-panel
         # Waveshare 7.0" WSVGA (1024x600) LCD panel
       - waveshare,7.0inch-c-panel
+        # Waveshare 7.0" WXGA (1280x800) LCD panel
+      - waveshare,7.0inch-e-panel
+        # Waveshare 7.0" HD 720p (720x1280) LCD panel
+      - waveshare,7.0inch-h-panel
+        # Waveshare 7.9" (400x1280) LCD panel
+      - waveshare,7.9inch-panel
+        # Waveshare 8.0" WXGA (1280x800) LCD panel
+      - waveshare,8.0inch-c-panel
+        # Waveshare 8.8" (480x1920) LCD panel
+      - waveshare,8.8inch-panel
         # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
       - winstar,wf35ltiacd
         # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel

-- 
2.47.3

[PATCH v2 4/4] drm/panel: simple: add Waveshare LCD panels

[Dmitry Baryshkov]

Waveshare have a serie of DSI panel kits with the DPI or LVDS panel
being attached to the DSI2DPI or DSI2LVDS bridge. The commit
46be11b678e0 ("drm/panel: simple: Add Waveshare 13.3" panel support")
added definitions for one of those panels, describe the rest of them.

Note, since the panels are hidden behind the bridges which are not being
programmed by the kernel, I could not confirm the pixel format for the
panels.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 381 +++++++++++++++++++++++++++++++++++
 1 file changed, 381 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 236bd56208cc..b2708a1fe464 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -5061,6 +5061,342 @@ static const struct panel_desc vl050_8048nt_c01 = {
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
 };
 
+static const struct drm_display_mode waveshare_28_lcd_mode = {
+	.clock = 50000,
+	.hdisplay = 480,
+	.hsync_start = 480 + 150,
+	.hsync_end = 480 + 150 + 50,
+	.htotal = 480 + 150 + 50 + 150,
+	.vdisplay = 640,
+	.vsync_start = 640 + 150,
+	.vsync_end = 640 + 150 + 50,
+	.vtotal = 640 + 150 + 50 + 150,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc waveshare_28_lcd_panel = {
+	.modes = &waveshare_28_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 44,
+		.height = 58,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+	.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE,
+};
+
+static const struct drm_display_mode waveshare_34_lcd_c_mode = {
+	.clock = 50000,
+	.hdisplay = 800,
+	.hsync_start = 800 + 32,
+	.hsync_end = 800 + 32 + 6,
+	.htotal = 800 + 32 + 6 + 120,
+	.vdisplay = 800,
+	.vsync_start = 800 + 8,
+	.vsync_end = 800 + 8 + 4,
+	.vtotal = 800 + 8 + 4 + 16,
+};
+
+static const struct panel_desc waveshare_34_lcd_c_panel = {
+	.modes = &waveshare_34_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 88,
+		.height = 88,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_40_lcd_mode = {
+	.clock = 50000,
+	.hdisplay = 480,
+	.hsync_start = 480 + 150,
+	.hsync_end = 480 + 150 + 100,
+	.htotal = 480 + 150 + 100 + 150,
+	.vdisplay = 800,
+	.vsync_start = 800 + 20,
+	.vsync_end = 800 + 20 + 100,
+	.vtotal = 800 + 20 + 100 + 20,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc waveshare_40_lcd_panel = {
+	.modes = &waveshare_40_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 52,
+		.height = 87,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+	.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE,
+};
+
+static const struct drm_display_mode waveshare_40_lcd_c_mode = {
+	.clock = 50000,
+	.hdisplay = 720,
+	.hsync_start = 720 + 32,
+	.hsync_end = 720 + 32 + 200,
+	.htotal = 720 + 32 + 200 + 120,
+	.vdisplay = 720,
+	.vsync_start = 720 + 8,
+	.vsync_end = 720 + 8 + 4,
+	.vtotal = 720 + 8 + 4 + 16,
+};
+
+static const struct panel_desc waveshare_40_lcd_c_panel = {
+	.modes = &waveshare_40_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 102,
+		.height = 102,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_50_lcd_c_mode = {
+	.clock = 50000,
+	.hdisplay = 1024,
+	.hsync_start = 1024 + 100,
+	.hsync_end = 1024 + 100 + 100,
+	.htotal = 1024 + 100 + 100 + 100,
+	.vdisplay = 600,
+	.vsync_start = 600 + 10,
+	.vsync_end = 600 + 10 + 10,
+	.vtotal = 600 + 10 + 10 + 10,
+	.flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc waveshare_50_lcd_c_panel = {
+	.modes = &waveshare_50_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 109,
+		.height = 66,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+	.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE,
+};
+
+static const struct drm_display_mode waveshare_50_lcd_d_mode = {
+	.clock = 83333,
+	.hdisplay = 720,
+	.hsync_start = 720 + 100,
+	.hsync_end = 720 + 100 + 80,
+	.htotal = 720 + 100 + 80 + 100,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 20,
+	.vsync_end = 1280 + 20 + 20,
+	.vtotal = 1280 + 20 + 20 + 20,
+};
+
+static const struct panel_desc waveshare_50_lcd_d_panel = {
+	.modes = &waveshare_50_lcd_d_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 62,
+		.height = 110,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_625_lcd_mode = {
+	.clock = 83333,
+	.hdisplay = 720,
+	.hsync_start = 720 + 50,
+	.hsync_end = 720 + 50 + 50,
+	.htotal = 720 + 50 + 50 + 50,
+	.vdisplay = 1560,
+	.vsync_start = 1560 + 20,
+	.vsync_end = 1560 + 20 + 20,
+	.vtotal = 1560 + 20 + 20 + 20,
+};
+
+static const struct panel_desc waveshare_625_lcd_panel = {
+	.modes = &waveshare_625_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 66,
+		.height = 144,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct panel_desc waveshare_70_lcd_c_panel = {
+	.modes = &waveshare_50_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 155,
+		.height = 87,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+	.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE,
+};
+
+static const struct drm_display_mode waveshare_80_lcd_c_mode;
+static const struct panel_desc waveshare_70_lcd_e_panel = {
+	.modes = &waveshare_80_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 152,
+		.height = 95,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_70_lcd_h_mode = {
+	.clock = 83333,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 64,
+	.hsync_end = 1280 + 64 + 64,
+	.htotal = 1280 + 64 + 64 + 64,
+	.vdisplay = 720,
+	.vsync_start = 720 + 64,
+	.vsync_end = 720 + 64 + 64,
+	.vtotal = 720 + 64 + 64 + 64,
+};
+
+static const struct panel_desc waveshare_70_lcd_h_panel = {
+	.modes = &waveshare_70_lcd_h_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 155,
+		.height = 88,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_79_lcd_mode = {
+	.clock = 50000,
+	.hdisplay = 400,
+	.hsync_start = 400 + 40,
+	.hsync_end = 400 + 40 + 30,
+	.htotal = 400 + 40 + 30 + 40,
+	.vdisplay = 1280,
+	.vsync_start = 1280 + 20,
+	.vsync_end = 1280 + 20 + 10,
+	.vtotal = 1280 + 20 + 10 + 20,
+};
+
+static const struct panel_desc waveshare_79_lcd_panel = {
+	.modes = &waveshare_79_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 60,
+		.height = 191,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_80_lcd_c_mode = {
+	.clock = 83333,
+	.hdisplay = 1280,
+	.hsync_start = 1280 + 156,
+	.hsync_end = 1280 + 156 + 20,
+	.htotal = 1280 + 156 + 20 + 40,
+	.vdisplay = 800,
+	.vsync_start = 800 + 40,
+	.vsync_end = 800 + 40 + 48,
+	.vtotal = 800 + 40 + 48 + 40,
+};
+
+static const struct panel_desc waveshare_80_lcd_c_panel = {
+	.modes = &waveshare_80_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 173,
+		.height = 108,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_88_lcd_mode = {
+	.clock = 83333,
+	.hdisplay = 480,
+	.hsync_start = 480 + 50,
+	.hsync_end = 480 + 50 + 50,
+	.htotal = 480 + 50 + 50 + 50,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 20,
+	.vsync_end = 1920 + 20 + 20,
+	.vtotal = 1920 + 20 + 20 + 20,
+};
+
+static const struct panel_desc waveshare_88_lcd_panel = {
+	.modes = &waveshare_88_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 56,
+		.height = 220,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct panel_desc waveshare_101_lcd_c_panel = {
+	.modes = &waveshare_80_lcd_c_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
+static const struct drm_display_mode waveshare_119_lcd_mode = {
+	.clock = 50000,
+	.hdisplay = 320,
+	.hsync_start = 320 + 60,
+	.hsync_end = 320 + 60 + 60,
+	.htotal = 320 + 60 + 60 + 60,
+	.vdisplay = 1480,
+	.vsync_start = 1480 + 60,
+	.vsync_end = 1480 + 60 + 60,
+	.vtotal = 1480 + 60 + 60 + 60,
+};
+
+static const struct panel_desc waveshare_119_lcd_panel = {
+	.modes = &waveshare_119_lcd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 58,
+		.height = 268,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode waveshare_133inch_mode = {
 	.clock = 148500,
 	.hdisplay = 1920,
@@ -5697,6 +6033,51 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "vxt,vl050-8048nt-c01",
 		.data = &vl050_8048nt_c01,
+	}, {
+		.compatible = "waveshare,2.8inch-panel",
+		.data = &waveshare_28_lcd_panel
+	}, {
+		.compatible = "waveshare,3.4inch-c-panel",
+		.data = &waveshare_34_lcd_c_panel
+	}, {
+		.compatible = "waveshare,4.0inch-panel",
+		.data = &waveshare_40_lcd_panel
+	}, {
+		.compatible = "waveshare,4.0inch-c-panel",
+		.data = &waveshare_40_lcd_c_panel
+	}, {
+		.compatible = "waveshare,5.0inch-c-panel",
+		.data = &waveshare_50_lcd_c_panel
+	}, {
+		.compatible = "waveshare,5.0inch-d-panel",
+		.data = &waveshare_50_lcd_d_panel
+	}, {
+		.compatible = "waveshare,6.25inch-panel",
+		.data = &waveshare_625_lcd_panel
+	}, {
+		.compatible = "waveshare,7.0inch-c-panel",
+		.data = &waveshare_70_lcd_c_panel
+	}, {
+		.compatible = "waveshare,7.0inch-e-panel",
+		.data = &waveshare_70_lcd_e_panel
+	}, {
+		.compatible = "waveshare,7.0inch-h-panel",
+		.data = &waveshare_70_lcd_h_panel
+	}, {
+		.compatible = "waveshare,7.9inch-panel",
+		.data = &waveshare_79_lcd_panel
+	}, {
+		.compatible = "waveshare,8.0inch-c-panel",
+		.data = &waveshare_80_lcd_c_panel
+	}, {
+		.compatible = "waveshare,8.8inch-panel",
+		.data = &waveshare_88_lcd_panel
+	}, {
+		.compatible = "waveshare,10.1inch-c-panel",
+		.data = &waveshare_101_lcd_c_panel
+	}, {
+		.compatible = "waveshare,11.9inch-panel",
+		.data = &waveshare_119_lcd_panel
 	}, {
 		.compatible = "waveshare,13.3inch-panel",
 		.data = &waveshare_133inch,

-- 
2.47.3

Claude review: drm/panel: simple: add Waveshare LCD panels

[Claude Code Review Bot]

Overall Series Review

Subject: drm/panel: simple: add Waveshare LCD panels
Author: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patches: 5
Reviewed: 2026-04-01T07:39:19.359525

---

This is a well-structured, straightforward series by Dmitry Baryshkov adding support for additional Waveshare DSI LCD panel kits. The series is logically organized: bindings first (patches 1 and 3), then driver support (patches 2 and 4). The technical approach is sound -- reusing the existing waveshare-dsi bridge driver with a new compatible for LVDS variants, and adding panel timing definitions in panel-simple.c.

The series has one notable issue: **missing trailing commas** in the OF match table entries in patch 4. There is also a forward declaration of `waveshare_80_lcd_c_mode` that, while functional, could be avoided by reordering the definitions. Overall this looks ready with minor style fixes.

---

---
Generated by Claude Code Patch Reviewer

Claude review: dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup

[Claude Code Review Bot]

Patch Review

Clean binding extension. The change from `const` to `enum` for the compatible property is the right approach, and the description updates are accurate.

Minor nit: the subject says "dsp2dpi" but the file is `dsi2dpi`. This is just a typo in the subject line (the actual file path in the diff is correct).

No functional issues.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/bridge: waveshare-dsi: support DSI LCD kits with LVDS panels

[Claude Code Review Bot]

Patch Review

The approach of using `i2c_get_match_data()` with the connector type stored in `.data` is clean and follows established kernel patterns.

```c
ws->bridge.type = (uintptr_t)i2c_get_match_data(i2c);
```

This is correct -- `i2c_get_match_data()` returns `const void *`, and casting to `uintptr_t` for the enum value is standard practice. The two OF table entries are well-formed.

One question for the author: the commit message says "The only difference with the existing waveshare,dsi2dpi is the bridge's output type (LVDS vs DPI)." -- is that truly the only difference? The ICN6211 (DSI2DPI) and ICN6202 (DSI2LVDS) are different chips. The probe function writes to registers `0xc0`, `0xc2`, `0xac` -- are those register writes valid/harmless for the ICN6202 as well, or is the bridge firmware handling those registers independently? The cover letter says the bridges are "completely handled by the board itself" so this is probably fine, but worth confirming.

No code issues.

---
Generated by Claude Code Patch Reviewer

Claude review: dt-bindings: display: panel: add Waveshare LCD panels

[Claude Code Review Bot]

Patch Review

The panel compatible strings are added in alphabetical order, which matches the existing style in `panel-simple.yaml`. Each entry has a descriptive comment with the resolution.

Note that `waveshare,7.0inch-c-panel` is listed in the cover letter as already existing in the bindings but is not re-added here -- this is correct since it's already present in the file.

Already has `Acked-by: Krzysztof Kozlowski`. No issues.

---
Generated by Claude Code Patch Reviewer

Claude review: drm/panel: simple: add Waveshare LCD panels

[Claude Code Review Bot]

Patch Review

This is the bulk of the series, adding 15 panel definitions. Several observations:

**1. Missing trailing commas in OF table entries.** Every new `.data` line is missing a trailing comma, while the existing entries all have them:

```c
	}, {
		.compatible = "waveshare,2.8inch-panel",
		.data = &waveshare_28_lcd_panel    /* <-- missing comma */
	}, {
```

Compare with existing style:
```c
	}, {
		.compatible = "waveshare,13.3inch-panel",
		.data = &waveshare_133inch,        /* <-- has comma */
	}, {
```

All 15 new entries are missing the trailing comma. While this compiles fine (the comma is optional before `}`), the existing code consistently uses trailing commas and this should match for style consistency.

**2. Forward declaration of `waveshare_80_lcd_c_mode`.** The patch uses:

```c
static const struct drm_display_mode waveshare_80_lcd_c_mode;
static const struct panel_desc waveshare_70_lcd_e_panel = {
	.modes = &waveshare_80_lcd_c_mode,
```

...with the actual definition appearing later. This works in C but is unusual for this file. It could be avoided by simply reordering the definitions so `waveshare_80_lcd_c_mode` and `waveshare_80_lcd_c_panel` appear before `waveshare_70_lcd_e_panel`. Since the panels are ordered numerically, moving 8.0" before 7.0"-E would be a minor ordering inconsistency, but the forward declaration is more surprising than a slightly out-of-order definition. Either approach is acceptable; just noting the trade-off.

**3. Mode reuse pattern.** Several panels share display modes:
- `waveshare_70_lcd_c_panel` reuses `waveshare_50_lcd_c_mode` (both 1024x600)
- `waveshare_70_lcd_e_panel` reuses `waveshare_80_lcd_c_mode` (both 1280x800)
- `waveshare_101_lcd_c_panel` reuses `waveshare_80_lcd_c_mode` (both 1280x800)

This is fine and follows existing practice in panel-simple.c where panels with identical timings share mode structs.

**4. Clock values.** The `waveshare_34_lcd_c_mode` has `.clock = 50000` for an 800x800 panel with htotal=958, vtotal=828. That gives a refresh rate of 50000000/(958*828) = ~63 Hz, which seems reasonable. The `.clock = 83333` entries (e.g., for 720x1280 @ 83333000/(1000*1340) = ~62 Hz) also check out. The timings appear plausible.

**5. Pixel format note.** The commit message honestly states: "since the panels are hidden behind the bridges which are not being programmed by the kernel, I could not confirm the pixel format for the panels." This is worth keeping in mind -- the LVDS panels all use `MEDIA_BUS_FMT_RGB888_1X7X4_SPWG` (JEIDA mapping), which is a reasonable default but may need correction if specific panels actually use VESA mapping (`MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA` -- though SPWG and JEIDA are effectively the same thing in this context). Since the bridge handles the conversion, this shouldn't matter in practice.

**Summary for patch 4:** Add trailing commas to all 15 OF table entries. Consider eliminating the forward declaration by reordering definitions.

---
Generated by Claude Code Patch Reviewer

Claude review: dt-bindings: display: waveshare,dsp2dpi: describe DSI2LVDS setup

[Claude Code Review Bot]

Patch Review

**Subject line typo**: The subject says `dsp2dpi` but the binding file is `dsi2dpi`. This is a minor cosmetic issue in the commit subject only (the actual file path in the diff is correct).

The binding changes are straightforward:

1. **Compatible changed from `const` to `enum`** — correctly adds `waveshare,dsi2lvds` alongside the existing `waveshare,dsi2dpi`:
```yaml
   compatible:
-    const: waveshare,dsi2dpi
+    enum:
+      - waveshare,dsi2dpi
+      - waveshare,dsi2lvds
```
This is the standard approach for extending a single-compatible binding.

2. **Description updates** — appropriately broadened to mention "or LVDS":
```yaml
-  Waveshare bridge board is part of Waveshare panel which converts DSI to DPI.
+  Waveshare bridge board is part of Waveshare panel which converts DSI to DPI
+  or LVDS.
```
and:
```yaml
-          Video port for MIPI DPI output panel.
+          Video port for MIPI DPI or LVDS output to the panel.
```

The commit message has a useful note explaining why the ICN6202/ICN6211 bridges are not itemized in the compatible strings (they're handled entirely on the board, not by the host). This is good context for DT reviewers. Minor nit: "itmized" in the commit body is a typo for "itemized".

No issues with the binding schema itself.

---
Generated by Claude Code Patch Reviewer