[PATCH v2 0/7] Add support for the Microsoft Surface Pro 12in 1st Edition (Snapdragon),

[PATCH v2 0/7] Add support for the Microsoft Surface Pro 12in 1st Edition (Snapdragon),

[Harrison Vanderbyl]

Changes in v2:
Ice device tree: 
 - Updated to use 0x0 formatting

Panel: 
 - Add edid to commit message

Device tree:
 - Fixed formatting and ordering nits
 - Removed extra dmic audio declarations
 - Added suspected devices on i2c busses
 - Fixed incorrect usb regulator
 - Describe panel pin regulator
 - Added defaults for volume button GPIOs

QSEECOM patch (4/8 in v1):
  - Applied by Bjorn Andersson
  
Hid patch (5/8 in v1):
  - Acked by Jiri Kosina, but not applied yet.

Link to v1:
https://lore.kernel.org/all/cover.1778498477.git.harrison.vanderbyl@gmail.com/


Currently supported:
  - UFS (with inline crypto)
  - Touchscreen, pen, cover keyboard and touchpad (via SAM)
  - USB 3.2 x2 with DP Alt Mode
  - Audio, WiFi, Bluetooth
  - CDSP, ADSP, GPU
  - Display (BOE NE120DRM-N28 panel)

Not yet supported:
  - Accelerometer
  - Front, back, and IR cameras
  - IRIS video decoder

Note on the compatible string: unlike other Microsoft Surface devices
upstream (denali, arcata, romulus13, blackrock), this device does not
appear to carry an internal codename in firmware. The DSDT, SMBIOS, and
EFI variables only refer to it as "Surface Pro 12in 1st Ed with
Snapdragon" (SKU 2110). I have used `microsoft,surface-pro-12in` as the
compatible. Suggestions welcome.

Although the device is marketed as just a smaller version of the denali,
it has enough differences that it warranted a different compatible and
device tree.

Tested on Surface Pro 12in 1st Ed with Snapdragon (SKU 2110).

Harrison Vanderbyl (7):
  dt-bindings: arm: qcom: Add Microsoft Surface Pro 12in
  dt-bindings: crypto: Add x1e80100 inline crypto
  platform/surface: SAM: Add support for Surface Pro 12in
  hid: Pen battery quirk for Surface Pro 12in
  drm/panel-edp: Add panel for Surface Pro 12in
  arm64: dts: qcom: hamoa: Add inline crypto for UFS
  arm64: dts: qcom: Add Microsoft Surface Pro 12in

 .../devicetree/bindings/arm/qcom.yaml         |    4 +
 .../crypto/qcom,inline-crypto-engine.yaml     |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 arch/arm64/boot/dts/qcom/hamoa.dtsi           |   10 +
 .../dts/qcom/x1p42100-microsoft-sp12in.dts    | 1201 +++++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c             |    1 +
 drivers/hid/hid-ids.h                         |    1 +
 drivers/hid/hid-input.c                       |    2 +
 .../surface/surface_aggregator_registry.c     |   15 +
 9 files changed, 1237 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-microsoft-sp12in.dts


base-commit: 5d6919055dec134de3c40167a490f33c74c12581
prerequisite-patch-id: a34133ba03bd1d31c0ed08612c31131b62015654
-- 
2.53.0

[PATCH v2 1/7] dt-bindings: arm: qcom: Add Microsoft Surface Pro 12in

[Harrison Vanderbyl]

Document the compatible string for the Microsoft Surface Pro
12-inch, 1st Edition with Snapdragon, based on the Qualcomm X1P42100
SoC.

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index b4943123d2e4..aaa9a129908a 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1168,6 +1168,10 @@ properties:
           - const: microsoft,denali
           - const: qcom,x1e80100
 
+      - items:
+          - const: microsoft,surface-pro-12in
+          - const: qcom,x1p42100
+
       - items:
           - enum:
               - qcom,purwa-iot-evk
-- 
2.53.0

[PATCH v2 2/7] dt-bindings: crypto: Add x1e80100 inline crypto

[Harrison Vanderbyl]

Add compatibility string for the x1e80100/x1p42100
inline crypto engine.

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 .../devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml    | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index 876bf90ed96e..a338c4a33e98 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -24,6 +24,7 @@ properties:
           - qcom,sm8550-inline-crypto-engine
           - qcom,sm8650-inline-crypto-engine
           - qcom,sm8750-inline-crypto-engine
+          - qcom,x1e80100-inline-crypto-engine
       - const: qcom,inline-crypto-engine
 
   reg:
-- 
2.53.0

[PATCH v2 3/7] platform/surface: SAM: Add support for Surface Pro 12in

[Harrison Vanderbyl]

Add a SAM client device node group and registry entry for the
Microsoft Surface Pro, 12-inch with Snapdragon.

This set enables the use of the following devices.
1: cover keyboard
2: cover touchpad
3: pen stash events.

The battery info and charger info devices have been
purposefully omitted as they are also reported by
other drivers and cause conflicts.

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 .../surface/surface_aggregator_registry.c         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 0599d5adf02e..884049961415 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -422,6 +422,19 @@ static const struct software_node *ssam_node_group_sp11[] = {
 	NULL,
 };
 
+/* Devices for Surface Pro 12" first edition (ARM/QCOM) */
+static const struct software_node *ssam_node_group_sp12in[] = {
+	&ssam_node_root,
+	&ssam_node_hub_kip,
+	&ssam_node_tmp_sensors,
+	&ssam_node_hid_kip_keyboard,
+	&ssam_node_hid_sam_penstash,
+	&ssam_node_hid_kip_touchpad,
+	&ssam_node_hid_kip_fwupd,
+	&ssam_node_pos_tablet_switch,
+	NULL,
+};
+
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
 static const struct acpi_device_id ssam_platform_hub_acpi_match[] = {
@@ -500,6 +513,8 @@ static const struct of_device_id ssam_platform_hub_of_match[] __maybe_unused = {
 	{ .compatible = "microsoft,arcata", (void *)ssam_node_group_sp9_5g },
 	/* Surface Pro 11 (ARM/QCOM) */
 	{ .compatible = "microsoft,denali", (void *)ssam_node_group_sp11 },
+	/* Surface Pro 12in First Edition (ARM/QCOM) */
+	{ .compatible = "microsoft,surface-pro-12in", (void *)ssam_node_group_sp12in },
 	/* Surface Laptop 7 */
 	{ .compatible = "microsoft,romulus13", (void *)ssam_node_group_sl7 },
 	{ .compatible = "microsoft,romulus15", (void *)ssam_node_group_sl7 },
-- 
2.53.0

[PATCH v2 4/7] hid: Pen battery quirk for Surface Pro 12in

[Harrison Vanderbyl]

The pen setup for this device uses bluetooth for
communicating battery levels and status instead of
reporting it over i2c.

Without this quirk, the device either reports an
extra, broken phantom battery, or hangs.

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
---
 drivers/hid/hid-ids.h   | 1 +
 drivers/hid/hid-input.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0cf63742315b..d16f55479786 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -459,6 +459,7 @@
 #define USB_DEVICE_ID_HP_X2		0x074d
 #define USB_DEVICE_ID_HP_X2_10_COVER	0x0755
 #define I2C_DEVICE_ID_CHROMEBOOK_TROGDOR_POMPOM	0x2F81
+#define I2C_DEVICE_ID_SURFACE_PRO_12IN  0x4376
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index d73cfa2e73d3..61ecd840d0bd 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -395,6 +395,8 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_CHROMEBOOK_TROGDOR_POMPOM),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_PRO_12IN),
+	  HID_BATTERY_QUIRK_IGNORE },
 	/*
 	 * Elan HID touchscreens seem to all report a non present battery,
 	 * set HID_BATTERY_QUIRK_IGNORE for all Elan I2C and USB HID devices.
-- 
2.53.0

[PATCH v2 5/7] drm/panel-edp: Add panel for Surface Pro 12in

[Harrison Vanderbyl]

Add an entry for the BOE NE120DRM-N28 panel,
used in the Microsoft Surface Pro 12-inch.

The values chosen were tested to be working fine
for wake from sleep and hibernation.

Panel edid:

00 ff ff ff ff ff ff 00 09 e5 c9 0c a0 06 00 07
0a 22 01 04 a5 19 11 78 07 9f 15 a6 55 4c 9b 25
0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 62 53 94 a0 80 b8 2e 50 18 10
3a 00 fe a9 00 00 00 1a 13 7d 94 a0 80 b8 2e 50
18 10 3a 00 fe a9 00 00 00 1a 00 00 00 fd 00 18
5a 5b 88 20 01 0a 20 20 20 20 20 20 00 00 00 fc
00 4e 45 31 32 30 44 52 4d 2d 4e 32 38 0a 00 0a

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 drivers/gpu/drm/panel/panel-edp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 497dcd48f57b..2cf52f03c217 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -2020,6 +2020,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c26, &delay_200_500_p2e200, "NV140WUM-T08"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0c93, &delay_200_500_e200, "Unknown"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cb6, &delay_200_500_e200, "NT116WHM-N44"),
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cc9, &delay_200_500_e50, "NE120DRM-N28"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cf2, &delay_200_500_e200, "NV156FHM-N4S"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cf6, &delay_200_500_e200_d100, "NV140WUM-N64"),
 	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cfa, &delay_200_500_e50, "NV116WHM-A4D"),
-- 
2.53.0

[PATCH v2 6/7] arm64: dts: qcom: hamoa: Add inline crypto for UFS

[Harrison Vanderbyl]

Add the Inline Crypto node and wire it to ufs_mem,
enabling UFS storage encryption on x1e80100 and
derivative SOCs.

This is needed to support encrypted storage on
the Microsoft Surface Pro 12-inch.

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 arch/arm64/boot/dts/qcom/hamoa.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 051dee076416..22420d0a323a 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -3952,6 +3952,8 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 
+			qcom,ice = <&ice>;
+
 			#reset-cells = <1>;
 
 			status = "disabled";
@@ -3997,6 +3999,14 @@ opp-300000000 {
 			};
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,x1e80100-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
-- 
2.53.0

[PATCH v2 7/7] arm64: dts: qcom: Add Microsoft Surface Pro 12in

[Harrison Vanderbyl]

Initial device tree for Microsoft Surface Pro 12in

Currently supported:
  - UFS
  - Touchscreen
  - Pen
  - USB 3.2 x2 (DP Alt Mode)
  - Audio
  - Wifi
  - Bluetooth
  - CDSP
  - ADSP
  - GPU

Not currently supported:
  - Accelerometer
  - Front, Back and IR cameras
  - IRIS video decoder

Tested on Surface_Pro_12in_1st_Ed_with_Snapdragon_2110

Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 .../dts/qcom/x1p42100-microsoft-sp12in.dts    | 1201 +++++++++++++++++
 2 files changed, 1203 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-microsoft-sp12in.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4ba8e7306419..8b6d3e4b479c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -449,3 +449,5 @@ x1p42100-lenovo-thinkbook-16-el2-dtbs	:= x1p42100-lenovo-thinkbook-16.dtb x1-el2
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
 x1p64100-microsoft-denali-el2-dtbs	:= x1p64100-microsoft-denali.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p64100-microsoft-denali.dtb x1p64100-microsoft-denali-el2.dtb
+x1p42100-microsoft-sp12in-el2-dtbs	:= x1p42100-microsoft-sp12in.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-microsoft-sp12in.dtb x1p42100-microsoft-sp12in-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-microsoft-sp12in.dts b/arch/arm64/boot/dts/qcom/x1p42100-microsoft-sp12in.dts
new file mode 100644
index 000000000000..32b8df249791
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-microsoft-sp12in.dts
@@ -0,0 +1,1201 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ * Copyright (c) 2025, Harrison Vanderbyl
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
+
+#include "purwa.dtsi"
+#include "hamoa-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "Surface Pro 12in 1st Edition";
+	compatible = "microsoft,surface-pro-12in", "qcom,x1p42100";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart14;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+
+		power-supply = <&vreg_edp_3p3>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>, <&vol_up_n_default>, <&vol_down_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+
+		key-vol-up {
+			gpios = <&pm8550_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				 <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Right-side upper port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* Right-side lower port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x20000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		vin-supply = <&vreg_panel_en>;
+	};
+
+	vreg_panel_en: regulator-panel-en {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PANEL_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-enable-ramp-delay = <150000>;
+
+		pinctrl-0 = <&panel_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1P42100-Microsoft-Surface-Pro-12in";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>,
+						<&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/Microsoft/Surface12/qcdxkmsucpurwa.mbn";
+};
+
+&i2c8 {
+	clock-frequency = <1000000>;
+
+	status = "okay";
+
+	touchscreen@16 {
+		compatible = "hid-over-i2c";
+		reg = <0x16>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 38 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/* MAX34417 @12 */
+	/* MAX34417 @14 */
+	/* MAX34417 @16 */
+	/* MAX34417 @18 */
+	/* MAX34417 @1a */
+
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+
+	// NFC @28, commercial devices only
+
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	qcom,dmic-sample-rate = <4800000>;
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel: panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pm8550_gpios {
+    vol_up_n_default: vol-up-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+    vol_down_n_default: vol-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/Microsoft/Surface12/qcadsp8380.mbn",
+			"qcom/x1p42100/Microsoft/Surface12/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/Microsoft/Surface12/qccdsp8380.mbn",
+			"qcom/x1p42100/Microsoft/Surface12/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+				   <44 4>; /* SPI (TPM) */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		bias-disable;
+	};
+
+	panel_en: panel-en-state {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	ssam_state: ssam-state-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio38";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	 };
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+
+	embedded-controller {
+		compatible = "microsoft,surface-sam";
+
+		interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+		current-speed = <4000000>;
+
+		pinctrl-0 = <&ssam_state>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l2i_1p2>;
+	vccq-max-microamp = <900000>;
+
+	vdd-hba-supply = <&vreg_l3j_0p8>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
-- 
2.53.0

Re: [PATCH v2 1/7] dt-bindings: arm: qcom: Add Microsoft Surface Pro 12in

[Krzysztof Kozlowski]

On Fri, May 15, 2026 at 03:41:46PM +1000, Harrison Vanderbyl wrote:
> Document the compatible string for the Microsoft Surface Pro
> 12-inch, 1st Edition with Snapdragon, based on the Qualcomm X1P42100
> SoC.
> 
> Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index b4943123d2e4..aaa9a129908a 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -1168,6 +1168,10 @@ properties:
>            - const: microsoft,denali
>            - const: qcom,x1e80100
>  
> +      - items:
> +          - const: microsoft,surface-pro-12in

Why isn't this part of the other enum with all devices?

Best regards,
Krzysztof

Re: [PATCH v2 2/7] dt-bindings: crypto: Add x1e80100 inline crypto

[Krzysztof Kozlowski]

On Fri, May 15, 2026 at 03:41:47PM +1000, Harrison Vanderbyl wrote:
> Add compatibility string for the x1e80100/x1p42100
> inline crypto engine.
> 
> Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>

This was posted, please do not duplicate work.
https://lore.kernel.org/all/eggp3un5ufbw2mjamxmpfccq3cs2luxabpa2sucofydzoak4vg@hy7mx3rtqfko/


Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets. See also:
https://elixir.bootlin.com/linux/v6.16-rc2/source/Documentation/process/submitting-patches.rst#L830

Best regards,
Krzysztof

Claude review: Add support for the Microsoft Surface Pro 12in 1st Edition (Snapdragon),

[Claude Code Review Bot]

Overall Series Review

Subject: Add support for the Microsoft Surface Pro 12in 1st Edition (Snapdragon),
Author: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Patches: 10
Reviewed: 2026-05-16T09:57:52.033216

---

This is a well-structured v2 series adding initial support for the Microsoft Surface Pro 12-inch (1st Edition with Snapdragon X Plus / x1p42100). The series covers DT bindings, crypto engine binding, SAM EC support, HID battery quirk, eDP panel entry, UFS inline crypto in the shared hamoa dtsi, and the board DTS itself. The scope is reasonable and the patches are logically split. The author has addressed v1 feedback.

The main concerns are cosmetic/style issues in the board DTS (indentation and comment style), which would likely be caught by DT CI checks. The functional content looks correct. The HID patch already has an Acked-by from Jiri Kosina.

**Overall: Looks reasonable to merge with minor style fixes in the DTS.**

---
Generated by Claude Code Patch Reviewer

Claude review: Re: [PATCH v2 1/7] dt-bindings: arm: qcom: Add Microsoft Surface Pro 12in

[Claude Code Review Bot]

Patch Review

Straightforward addition of the compatible string `microsoft,surface-pro-12in` paired with `qcom,x1p42100` to the qcom board bindings.

```yaml
+      - items:
+          - const: microsoft,surface-pro-12in
+          - const: qcom,x1p42100
```

The placement in the file is correct (after the `microsoft,denali` / `qcom,x1e80100` entry). The compatible string is descriptive. The cover letter notes the device doesn't have an internal codename in firmware unlike other Surface devices (denali, arcata, etc.), which justifies the descriptive name.

**No issues.**

---

---
Generated by Claude Code Patch Reviewer

Claude review: Re: [PATCH v2 2/7] dt-bindings: crypto: Add x1e80100 inline crypto

[Claude Code Review Bot]

Patch Review

One-line addition to the ICE (Inline Crypto Engine) binding:

```yaml
+          - qcom,x1e80100-inline-crypto-engine
```

This is added in alphabetical order within the compatible enum and is needed by patch 6/7. Straightforward.

**No issues.**

---

---
Generated by Claude Code Patch Reviewer

Claude review: platform/surface: SAM: Add support for Surface Pro 12in

[Claude Code Review Bot]

Patch Review

Adds a SAM node group and OF match entry for the Surface Pro 12in:

```c
+static const struct software_node *ssam_node_group_sp12in[] = {
+	&ssam_node_root,
+	&ssam_node_hub_kip,
+	&ssam_node_tmp_sensors,
+	&ssam_node_hid_kip_keyboard,
+	&ssam_node_hid_sam_penstash,
+	&ssam_node_hid_kip_touchpad,
+	&ssam_node_hid_kip_fwupd,
+	&ssam_node_pos_tablet_switch,
+	NULL,
+};
```

The commit message explains the deliberate omission of battery and charger info nodes to avoid conflicts with other drivers. The node group is similar to SP11 (`ssam_node_group_sp11`) but without battery-related nodes.

The OF match entry correctly uses the compatible from the DTS:

```c
+	{ .compatible = "microsoft,surface-pro-12in", (void *)ssam_node_group_sp12in },
```

**Minor nit:** The comment says `/* Surface Pro 12in First Edition (ARM/QCOM) */` while other entries use shorter names like `/* Surface Pro 11 (ARM/QCOM) */`. Consistent, but "First Edition" is a bit verbose for a comment. Not blocking.

**No functional issues.**

---

---
Generated by Claude Code Patch Reviewer

Claude review: hid: Pen battery quirk for Surface Pro 12in

[Claude Code Review Bot]

Patch Review

Adds `HID_BATTERY_QUIRK_IGNORE` for the Elan touchscreen controller on this device:

```c
+#define I2C_DEVICE_ID_SURFACE_PRO_12IN  0x4376
```

```c
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_PRO_12IN),
+	  HID_BATTERY_QUIRK_IGNORE },
```

The commit message explains the pen reports battery over Bluetooth, not I2C, so querying the I2C device for battery either shows a phantom battery or causes hangs. Using `HID_BATTERY_QUIRK_IGNORE` (not `AVOID_QUERY` like the Trogdor entry above it) is appropriate since the battery shouldn't be reported at all from this path.

Already Acked-by Jiri Kosina.

**Minor nit:** The `#define` uses two spaces before `0x4376` — other defines in hid-ids.h typically use a tab. This is cosmetic and likely fine.

**No functional issues.**

---

---
Generated by Claude Code Patch Reviewer

Claude review: drm/panel-edp: Add panel for Surface Pro 12in

[Claude Code Review Bot]

Patch Review

Adds a BOE NE120DRM-N28 panel entry using `delay_200_500_e50` timing:

```c
+	EDP_PANEL_ENTRY('B', 'O', 'E', 0x0cc9, &delay_200_500_e50, "NE120DRM-N28"),
```

The panel ID `0x0cc9` is correctly derived from the EDID hex dump provided in the commit message (bytes 8-9 of the EDID: `09 e5` is the manufacturer, `c9 0c` little-endian is product code `0x0cc9`). The entry is in the correct sorted position (between `0x0cb6` and `0x0cf2`). The timing choice `delay_200_500_e50` is described as tested for wake from sleep and hibernation.

The commit message helpfully includes the raw EDID which is good practice for panel patches.

**No issues.**

---

---
Generated by Claude Code Patch Reviewer

Claude review: arm64: dts: qcom: hamoa: Add inline crypto for UFS

[Claude Code Review Bot]

Patch Review

Adds the ICE node and wires it to the UFS host controller in the shared hamoa.dtsi:

```dts
+		ice: crypto@1d88000 {
+			compatible = "qcom,x1e80100-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
```

The `qcom,ice` property is added to the UFS node:

```dts
+			qcom,ice = <&ice>;
```

The ICE node address `0x1d88000` is correctly placed before `cryptobam` at `0x1dc4000` in ascending address order. The compatible uses the binding from patch 2/7. This affects all hamoa-based boards (x1e80100 family), which is intentional since the ICE hardware is part of the SoC.

**Potential concern:** This change affects the shared `hamoa.dtsi` which is used by all x1e80100/x1p42100 boards. Adding `qcom,ice` to the UFS node and a new ICE device node will affect existing boards (Surface Pro 11 / Denali, Lenovo ThinkPad, ASUS VivoBook, etc.). This should be fine since the ICE hardware exists on all these SoCs — but it would be good to confirm this doesn't break any existing boards. The ICE node has no `status` property so it defaults to "okay", and the `qcom,ice` property in the UFS node is optional in the driver. This should be safe.

---

---
Generated by Claude Code Patch Reviewer

Claude review: arm64: dts: qcom: Add Microsoft Surface Pro 12in

[Claude Code Review Bot]

Patch Review

This is the main board DTS file (1201 lines). The overall structure follows the established pattern for x1p42100 boards. A few style issues:

**Issue 1 — Indentation in `&pm8550_gpios` uses spaces instead of tabs:**

```dts
+&pm8550_gpios {
+    vol_up_n_default: vol-up-n-state {
+		pins = "gpio8";
```

and:

```dts
+    vol_down_n_default: vol-down-n-state {
+		pins = "gpio6";
```

The `vol_up_n_default` and `vol_down_n_default` lines use 4 spaces for indentation, while the rest of the file (and DTS convention) uses tabs. This should be fixed.

**Issue 2 — C++ style comment in i2c9:**

```dts
+&i2c9 {
+	clock-frequency = <400000>;
+
+	// NFC @28, commercial devices only
```

DTS files conventionally use C-style `/* */` comments. Some DT maintainers flag `//` comments. The `i2c4` section correctly uses `/* */` style comments for similar device annotations.

**Issue 3 — Extra whitespace in ts0_default closing brace:**

```dts
+	ts0_default: ts0-default-state {
+		...
+		reset-n-pins {
+			...
+		};
+	 };
```

The closing `};` has an extra space before it (`\t }`), making it misaligned compared to the opening.

**Minor observations (non-blocking):**
- The `chassis-type = "tablet"` is correct for this form factor.
- The two USB-C connectors are defined with correct pmic-glink wiring and SBU mux configuration.
- The `reserved-memory` CMA region at 512MB is typical for Qualcomm ARM64 boards.
- The regulator chain `vreg_panel_en` -> `vreg_edp_3p3` -> backlight/panel is logical with the 150ms enable ramp delay.
- The `vreg_l7b_2p8` has `regulator-always-on` which should be verified as intentional.
- The WSA8845 speakers both share the same `reset-gpios` (lpass_tlmm gpio12), which is the expected configuration for paired speakers.
- Firmware paths use `qcom/x1p42100/Microsoft/Surface12/` which is a sensible naming convention.

**Summary for patch 7:** Three style issues (spaces vs tabs, comment style, extra whitespace) should be fixed before merge. The functional content of the DTS looks correct.

---
Generated by Claude Code Patch Reviewer