Claude review: drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()

Claude review: drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()

[Claude Code Review Bot]

Patch Review

Removes the empty `dw_hdmi_phy_update_hpd()` and all references from the `dw_hdmi_phy_ops` tables in imx8mp, rockchip, sun4i, and the default synopsys PHY. The `update_hpd` field is removed from the `dw_hdmi_phy_ops` struct in the header. Clean removal across 5 files. **No Reviewed-by yet.**

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()

[Claude Code Review Bot]

Patch Review

Removes the now-empty `dw_hdmi_phy_update_hpd()` and its field from `struct dw_hdmi_phy_ops`. Touches all platform drivers (rockchip, imx8mp, sun4i) to remove the `.update_hpd` entry. Clean removal.

---
Generated by Claude Code Patch Reviewer

[PATCH v6 00/22] drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup

[Jonas Karlman]

This is a revival of an old dw-hdmi series and is the first series part
of a new effort to upstream old LibreELEC HDMI 2.0 patches for Rockchip
RK33xx devices.

This series ensure poweron/poweroff and CEC phys addr invalidation is
happening during normal DRM funcs, ensures EDID and CEC phys addr is
updated in detect() similar to how the bridge connector works with a
HDMI bridge attached, and also changes to debounce hotplug processing
to prevent a full disable/enable cycle during a HPD low voltage pulse.

After this series HPD, EDID and CEC handling should work very similar
regardless is the dw-hdmi connector or the bridge connector is used.
It should also help ensure a smoother transition when dw-hdmi is fully
converted into a HDMI bridge in a future series.

These changes have mainly been tested on Rockchip RK3328, RK3399 and
RK3568 devices using both the dw-hdmi connector and also using a basic
convert to use a bridge connector. The changes has also been tested on
a Amlogic S905X device that uses the bridge connector.

Testing with a Rock Pi 4 (RK3399) using a Reaspberry Pi Monitor with
Linux kms client console using drm.debug=0xe should log something like
following:

 Power cycle monitor using the power button:
  [CONNECTOR:68:HDMI-A-1] CEA VCDB 0x4a
  [CONNECTOR:68:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 0 kHz
  [CONNECTOR:68:HDMI-A-1] ELD monitor RPI MON156
  [CONNECTOR:68:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
  [CONNECTOR:68:HDMI-A-1] ELD size 36, SAD count 1
  [CONNECTOR:68:HDMI-A-1] Same epoch counter 10
 
 Cable unplugged:
  [CONNECTOR:68:HDMI-A-1] EDID changed, epoch counter 11
  [CONNECTOR:68:HDMI-A-1] status updated from connected to disconnected
  [CONNECTOR:68:HDMI-A-1] Changed epoch counter 10 => 12
  [CONNECTOR:68:HDMI-A-1] generating connector hotplug event
  [CONNECTOR:68:HDMI-A-1] Sent hotplug event

 Cable connected:
  [CONNECTOR:68:HDMI-A-1] CEA VCDB 0x4a
  [CONNECTOR:68:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 0 kHz
  [CONNECTOR:68:HDMI-A-1] ELD monitor RPI MON156
  [CONNECTOR:68:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
  [CONNECTOR:68:HDMI-A-1] ELD size 36, SAD count 1
  [CONNECTOR:68:HDMI-A-1] status updated from disconnected to connected
  [CONNECTOR:68:HDMI-A-1] Changed epoch counter 12 => 13
  [CONNECTOR:68:HDMI-A-1] generating connector hotplug event
  [CONNECTOR:68:HDMI-A-1] Sent hotplug event

This series has evolved into an initial part of a larger multi series
effort to:
- drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup [v6]
- drm/bridge: dw-hdmi: Improve input/output bus format handling
- drm/bridge: dw-hdmi: Convert to a HDMI bridge and use of bridge connector
- drm/bridge: dw-hdmi: Add and use tmds_char_rate_valid() plat data ops
- drm/meson: hdmi: Misc cleanup and use CEC notifier helpers
- phy: rockchip: inno-hdmi: Change TMDS rate handling to configure() ops [v3]
- drm/rockchip: dw_hdmi: Misc cleanup and propagate bus format [v1]
- drm/rockchip: dw_hdmi: Enable YCbCr and Deep Color modes
Link to snapshot: https://github.com/Kwiboo/linux-rockchip/commits/next-20260508-rk-hdmi-v4/

Changes in v6:
- Update EDID and CEC phys addr in the bridge detect() func
- Add CEC notifier bridge op for the bridge connector
- Change back to disable_delayed_work_sync() in hpd disable ops,
  a possible deadlock is avoided by not using drm_bridge_hpd_notify()
- Drop use of a suspend helper now that hpd disable ops use sync() calls
- Ensure HPD interrupt is masked and IRQ handler is disabled early
  in dw_hdmi_remove() to prevent any irq re-arming of delayed work
- Update a few commit messages and cover letter
- Collect t-b tags
Link to v5: https://lore.kernel.org/dri-devel/20260510124111.1226584-1-jonas@kwiboo.se/

Changes in v5:
- Add patch that holds a bridge ref until connector cleanup, to fix
  a use-after-free issue during connector cleanup
- Add patch that unregister CEC notifier during connector cleanup
- Add patch that adds a common suspend helper
- Add patch that drops call to drm_bridge_hpd_notify()
- Collect r-b tag
- Rebased on next-20260508
Link to v4: https://lore.kernel.org/dri-devel/20260504191059.275928-1-jonas@kwiboo.se/

Changes in v4:
- Change to use generic CEC notifier helpers
- Disable/mask hpd_work until enable_hpd()/hpd_enable()
- Read connector status directly from HW regs in hpd_work
- Continued rework of HDP and RXSENSE interrupt handling
- Collect r-b tags
- Rebased on next-20260430
Link to v3: https://lore.kernel.org/dri-devel/20260403185303.80748-1-jonas@kwiboo.se/

Changes in v3:
- Rework EDID refresh handling to closer match bridge connector
- Use delayed work to debounce HPD processing
- Update commit messages
- Collect r-b tags
- Rebased on next-20260401
Link to v2: https://lore.kernel.org/dri-devel/20240908132823.3308029-1-jonas@kwiboo.se/

Changes in v2:
- Add patch to disable scrambler feature when not supported
- Add patch to only notify connected status on HPD interrupt
- Update commit messages
- Collect r-b tags
- Rebased on next-20240906
Link to v1: https://lore.kernel.org/dri-devel/20240611155108.1436502-1-jonas@kwiboo.se/

Jonas Karlman (22):
  drm: bridge: dw_hdmi: Disable scrambler feature when not supported
  drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt
  drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable
  drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode
  drm: bridge: dw_hdmi: Fold poweron and setup functions
  drm: bridge: dw_hdmi: Remove previous_mode and mode_set
  drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup
  drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup
  drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect
  drm: bridge: dw_hdmi: Remove cec_notifier_mutex
  drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()
  drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()
  drm: bridge: dw_hdmi: Use generic CEC notifier helpers
  drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()
  drm: bridge: dw_hdmi: Declare bridge CEC notifier support
  drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio
  drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()
  drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event
  drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling
  drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()
  drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()
  drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers

 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c |   1 -
 drivers/gpu/drm/bridge/synopsys/Kconfig     |   1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c   | 498 ++++++++------------
 drivers/gpu/drm/meson/meson_dw_hdmi.c       |   3 -
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c |   2 -
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c      |   2 -
 include/drm/bridge/dw_hdmi.h                |   6 -
 7 files changed, 187 insertions(+), 326 deletions(-)

-- 
2.54.0

[PATCH v6 01/22] drm: bridge: dw_hdmi: Disable scrambler feature when not supported

[Jonas Karlman]

The scrambler feature can be left enabled when hotplugging from a sink
and mode that require scrambling to a sink that does not support SCDC or
scrambling.

Typically a blank screen or 'no signal' message can be observed after
using a HDMI 2.0 4K@60Hz mode and then hotplugging to a sink that only
support HDMI 1.4.

Fix this by disabling the scrambler feature when SCDC is not supported.

Fixes: 264fce6cc2c1 ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support")
Reported-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: No change
v3: Collect r-b tag
v2: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 41b3a9cfa2f5..d3e6a6562870 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2135,6 +2135,8 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 				    HDMI_MC_SWRSTZ);
 			drm_scdc_set_scrambling(hdmi->curr_conn, 0);
 		}
+	} else if (hdmi->version >= 0x200a) {
+		hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
 	}
 
 	/* Set up horizontal active pixel width */
-- 
2.54.0

[PATCH v6 02/22] drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt

[Jonas Karlman]

drm_helper_hpd_irq_event() and drm_bridge_hpd_notify() may incorrectly
be called with a connected status when HPD is high and RX sense is
changed. This typically happens when the HDMI cable is unplugged,
shortly before the HPD is changed to low.

The original intent of commit da09daf88108 ("drm: bridge: dw_hdmi: only
trigger hotplug event on link change") was to signal hotplug event at
correct interrupt states.

Based on the commit message the intent was to trigger hotplug event:
- when HPD goes high (plugin)
- when both HPD and RX sense has gone low (plugout)

However, following interrupt state changes can typically be observed
when the HDMI cable is unplugged:
- RX interrupt:  HPD=high RX=low  -> triggers a connected event
- HPD interrupt: HPD=low  RX=low  -> triggers a disconnected event

Fix this by only notify connected status on the HPD interrupt when HPD
is going high, not on the RX sense interrupt when RX sense is changed.

After this a connected event should be triggered when HPD=high at HPD
interrupt, and a disconnected event should be triggered when both
HPD=low and RX=low at either HPD or RX interrupt.

Fixes: da09daf88108 ("drm: bridge: dw_hdmi: only trigger hotplug event on link change")
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: Collect r-b tag
v3: Update commit message
v2: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index d3e6a6562870..b7bfc0e9a6b2 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3157,7 +3157,8 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 			mutex_unlock(&hdmi->cec_notifier_mutex);
 		}
 
-		if (phy_stat & HDMI_PHY_HPD)
+		if ((intr_stat & HDMI_IH_PHY_STAT0_HPD) &&
+		    (phy_stat & HDMI_PHY_HPD))
 			status = connector_status_connected;
 
 		if (!(phy_stat & (HDMI_PHY_HPD | HDMI_PHY_RX_SENSE)))
-- 
2.54.0

[PATCH v6 03/22] drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable

[Jonas Karlman]

Change to only call poweron/poweroff from atomic_enable/atomic_disable
funcs instead of trying to be clever by keeping a bridge_is_on state and
poweron/off in the hotplug IRQ handler.

The bridge is already enabled/disabled depending on connection status
with the call to drm_helper_hpd_irq_event() in hotplug IRQ handler.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Update commit message,
    Collect t-b tag
v5: No change
v4: No change
v3: Collect r-b tag
v2: Update commit message
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 33 ++---------------------
 1 file changed, 2 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index b7bfc0e9a6b2..8f7949d2c7f2 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -171,7 +171,6 @@ struct dw_hdmi {
 	enum drm_connector_force force;	/* mutex-protected force state */
 	struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */
 	bool disabled;			/* DRM has disabled our bridge */
-	bool bridge_is_on;		/* indicates the bridge is on */
 	bool rxsense;			/* rxsense state */
 	u8 phy_mask;			/* desired phy int mask settings */
 	u8 mc_clkdis;			/* clock disable register */
@@ -2400,8 +2399,6 @@ static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
 
 static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
 {
-	hdmi->bridge_is_on = true;
-
 	/*
 	 * The curr_conn field is guaranteed to be valid here, as this function
 	 * is only be called when !hdmi->disabled.
@@ -2415,30 +2412,6 @@ static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
 		hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
 		hdmi->phy.enabled = false;
 	}
-
-	hdmi->bridge_is_on = false;
-}
-
-static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
-{
-	int force = hdmi->force;
-
-	if (hdmi->disabled) {
-		force = DRM_FORCE_OFF;
-	} else if (force == DRM_FORCE_UNSPECIFIED) {
-		if (hdmi->rxsense)
-			force = DRM_FORCE_ON;
-		else
-			force = DRM_FORCE_OFF;
-	}
-
-	if (force == DRM_FORCE_OFF) {
-		if (hdmi->bridge_is_on)
-			dw_hdmi_poweroff(hdmi);
-	} else {
-		if (!hdmi->bridge_is_on)
-			dw_hdmi_poweron(hdmi);
-	}
 }
 
 /*
@@ -2563,7 +2536,6 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
 
 	mutex_lock(&hdmi->mutex);
 	hdmi->force = connector->force;
-	dw_hdmi_update_power(hdmi);
 	dw_hdmi_update_phy_mask(hdmi);
 	mutex_unlock(&hdmi->mutex);
 }
@@ -2988,7 +2960,7 @@ static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
 	mutex_lock(&hdmi->mutex);
 	hdmi->disabled = true;
 	hdmi->curr_conn = NULL;
-	dw_hdmi_update_power(hdmi);
+	dw_hdmi_poweroff(hdmi);
 	dw_hdmi_update_phy_mask(hdmi);
 	handle_plugged_change(hdmi, false);
 	mutex_unlock(&hdmi->mutex);
@@ -3006,7 +2978,7 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
 	mutex_lock(&hdmi->mutex);
 	hdmi->disabled = false;
 	hdmi->curr_conn = connector;
-	dw_hdmi_update_power(hdmi);
+	dw_hdmi_poweron(hdmi);
 	dw_hdmi_update_phy_mask(hdmi);
 	handle_plugged_change(hdmi, true);
 	mutex_unlock(&hdmi->mutex);
@@ -3106,7 +3078,6 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
 		if (hpd)
 			hdmi->rxsense = true;
 
-		dw_hdmi_update_power(hdmi);
 		dw_hdmi_update_phy_mask(hdmi);
 	}
 	mutex_unlock(&hdmi->mutex);
-- 
2.54.0

[PATCH v6 04/22] drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode

[Jonas Karlman]

Use the passed mode instead of mixing use of passed mode and the stored
previous_mode in dw_hdmi_setup(). The passed mode is currenly always the
previous_mode.

Also fix a small typo and add a variable to help shorten a code line.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: No change
v3: Collect r-b tag
v2: Update commit message, s/type/typo/
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 8f7949d2c7f2..aa12397b3343 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2258,6 +2258,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi,
 			 const struct drm_connector *connector,
 			 const struct drm_display_mode *mode)
 {
+	const struct drm_display_info *display = &connector->display_info;
 	int ret;
 
 	hdmi_disable_overflow_interrupts(hdmi);
@@ -2303,12 +2304,10 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi,
 	hdmi->hdmi_data.video_mode.mdataenablepolarity = true;
 
 	/* HDMI Initialization Step B.1 */
-	hdmi_av_composer(hdmi, &connector->display_info, mode);
+	hdmi_av_composer(hdmi, display, mode);
 
-	/* HDMI Initializateion Step B.2 */
-	ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data,
-				  &connector->display_info,
-				  &hdmi->previous_mode);
+	/* HDMI Initialization Step B.2 */
+	ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, display, mode);
 	if (ret)
 		return ret;
 	hdmi->phy.enabled = true;
-- 
2.54.0

[PATCH v6 05/22] drm: bridge: dw_hdmi: Fold poweron and setup functions

[Jonas Karlman]

Fold the poweron and setup functions into one function and use the
adjusted_mode directly from the new crtc_state to remove the need of
storing previous_mode.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change, rebase on next-20260508
v4: No change
v3: Collect r-b tag
v2: No change
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index aa12397b3343..607faf4da967 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2254,9 +2254,9 @@ static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi)
 		    HDMI_IH_MUTE_FC_STAT2);
 }
 
-static int dw_hdmi_setup(struct dw_hdmi *hdmi,
-			 const struct drm_connector *connector,
-			 const struct drm_display_mode *mode)
+static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
+			   const struct drm_connector *connector,
+			   const struct drm_display_mode *mode)
 {
 	const struct drm_display_info *display = &connector->display_info;
 	int ret;
@@ -2396,15 +2396,6 @@ static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
 	hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE);
 }
 
-static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
-{
-	/*
-	 * The curr_conn field is guaranteed to be valid here, as this function
-	 * is only be called when !hdmi->disabled.
-	 */
-	dw_hdmi_setup(hdmi, hdmi->curr_conn, &hdmi->previous_mode);
-}
-
 static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
 {
 	if (hdmi->phy.enabled) {
@@ -2969,15 +2960,19 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
 					 struct drm_atomic_commit *state)
 {
 	struct dw_hdmi *hdmi = bridge->driver_private;
+	const struct drm_display_mode *mode;
 	struct drm_connector *connector;
+	struct drm_crtc *crtc;
 
 	connector = drm_atomic_get_new_connector_for_encoder(state,
 							     bridge->encoder);
+	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
+	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
 
 	mutex_lock(&hdmi->mutex);
 	hdmi->disabled = false;
 	hdmi->curr_conn = connector;
-	dw_hdmi_poweron(hdmi);
+	dw_hdmi_poweron(hdmi, connector, mode);
 	dw_hdmi_update_phy_mask(hdmi);
 	handle_plugged_change(hdmi, true);
 	mutex_unlock(&hdmi->mutex);
-- 
2.54.0

[PATCH v6 06/22] drm: bridge: dw_hdmi: Remove previous_mode and mode_set

[Jonas Karlman]

With the use of adjusted_mode directly from the crtc_state there is no
longer a need to store a copy in previous_mode, remove it and the now
unneeded mode_set ops.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change, rebase on next-20260508
v4: No change
v3: Collect r-b tag
v2: No change
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 607faf4da967..a176eb55418c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -156,8 +156,6 @@ struct dw_hdmi {
 		bool enabled;
 	} phy;
 
-	struct drm_display_mode previous_mode;
-
 	struct i2c_adapter *ddc;
 	void __iomem *regs;
 	bool sink_is_hdmi;
@@ -167,7 +165,7 @@ struct dw_hdmi {
 	struct pinctrl_state *default_state;
 	struct pinctrl_state *unwedge_state;
 
-	struct mutex mutex;		/* for state below and previous_mode */
+	struct mutex mutex;		/* for state below */
 	enum drm_connector_force force;	/* mutex-protected force state */
 	struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */
 	bool disabled;			/* DRM has disabled our bridge */
@@ -2928,20 +2926,6 @@ dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
 	return mode_status;
 }
 
-static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
-				    const struct drm_display_mode *orig_mode,
-				    const struct drm_display_mode *mode)
-{
-	struct dw_hdmi *hdmi = bridge->driver_private;
-
-	mutex_lock(&hdmi->mutex);
-
-	/* Store the display mode for plugin/DKMS poweron events */
-	drm_mode_copy(&hdmi->previous_mode, mode);
-
-	mutex_unlock(&hdmi->mutex);
-}
-
 static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
 					  struct drm_atomic_commit *state)
 {
@@ -3005,7 +2989,6 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
 	.atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
 	.atomic_enable = dw_hdmi_bridge_atomic_enable,
 	.atomic_disable = dw_hdmi_bridge_atomic_disable,
-	.mode_set = dw_hdmi_bridge_mode_set,
 	.mode_valid = dw_hdmi_bridge_mode_valid,
 	.detect = dw_hdmi_bridge_detect,
 	.edid_read = dw_hdmi_bridge_edid_read,
-- 
2.54.0

[PATCH v6 07/22] drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup

[Jonas Karlman]

drmres connector cleanup typically run after devres has released the
last dw-hdmi bridge reference. Since struct dw_hdmi, where the connector
lives, is freed when the last bridge reference is released, connector
cleanup can end up accessing freed memory.

Call trace without a bridge reference held until connector cleanup:
- dw_hdmi_bridge_detach()
- dw_hdmi_bridge_destroy()      <<-- struct dw_hdmi is free()
- [drm:drm_managed_release] drmres release begin
- [drm:drm_managed_release] REL (____ptrval____) drm_mode_config_init_release (0 bytes)
- dw_hdmi_connector_destroy()
  - drm_connector_cleanup()     <<-- drm_connector is use-after-free
  [...]
- [drm:drm_managed_release] drmres release end

Hold a bridge reference for as long as the connector exists and drop it
after drm_connector_cleanup() has completed to keep struct dw_hdmi alive
until connector teardown is finished and avoids the use-after-free.

Call trace with a bridge reference held until connector cleanup:
- dw_hdmi_bridge_detach()
- [drm:drm_managed_release] drmres release begin
- [drm:drm_managed_release] REL (____ptrval____) drm_mode_config_init_release (0 bytes)
- dw_hdmi_connector_destroy()
  - drm_connector_cleanup()     <<-- drm_connector is destroy()
  - drm_bridge_put()
- dw_hdmi_bridge_destroy()      <<-- struct dw_hdmi is free()
  [...]
- [drm:drm_managed_release] drmres release end

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a176eb55418c..cbbd15578042 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2528,10 +2528,18 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
 	mutex_unlock(&hdmi->mutex);
 }
 
+static void dw_hdmi_connector_destroy(struct drm_connector *connector)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
+
+	drm_connector_cleanup(connector);
+	drm_bridge_put(&hdmi->bridge);
+}
+
 static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = dw_hdmi_connector_detect,
-	.destroy = drm_connector_cleanup,
+	.destroy = dw_hdmi_connector_destroy,
 	.force = dw_hdmi_connector_force,
 	.reset = drm_atomic_helper_connector_reset,
 	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
@@ -2548,6 +2556,7 @@ static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
 	struct drm_connector *connector = &hdmi->connector;
 	struct cec_connector_info conn_info;
 	struct cec_notifier *notifier;
+	int ret;
 
 	if (hdmi->version >= 0x200a)
 		connector->ycbcr_420_allowed =
@@ -2560,10 +2569,14 @@ static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
 
 	drm_connector_helper_add(connector, &dw_hdmi_connector_helper_funcs);
 
-	drm_connector_init_with_ddc(hdmi->bridge.dev, connector,
-				    &dw_hdmi_connector_funcs,
-				    DRM_MODE_CONNECTOR_HDMIA,
-				    hdmi->ddc);
+	ret = drm_connector_init_with_ddc(hdmi->bridge.dev, connector,
+					  &dw_hdmi_connector_funcs,
+					  DRM_MODE_CONNECTOR_HDMIA,
+					  hdmi->ddc);
+	if (ret)
+		return ret;
+
+	drm_bridge_get(&hdmi->bridge);
 
 	/*
 	 * drm_connector_attach_max_bpc_property() requires the
-- 
2.54.0

[PATCH v6 08/22] drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup

[Jonas Karlman]

The CEC notifier is being unregistered when the bridge detach,
something that happens earlier than normal connector cleanup.

Change to unregister the CEC notifier at connector cleanup, in the
connector .destroy() func, to align the lifetime of the connector and
the CEC notifier and closer match a drmres handled generic CEC notifier.

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index cbbd15578042..5fd26ff8f55b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2532,6 +2532,11 @@ static void dw_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 
+	mutex_lock(&hdmi->cec_notifier_mutex);
+	cec_notifier_conn_unregister(hdmi->cec_notifier);
+	hdmi->cec_notifier = NULL;
+	mutex_unlock(&hdmi->cec_notifier_mutex);
+
 	drm_connector_cleanup(connector);
 	drm_bridge_put(&hdmi->bridge);
 }
@@ -2909,16 +2914,6 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge,
 	return dw_hdmi_connector_create(hdmi);
 }
 
-static void dw_hdmi_bridge_detach(struct drm_bridge *bridge)
-{
-	struct dw_hdmi *hdmi = bridge->driver_private;
-
-	mutex_lock(&hdmi->cec_notifier_mutex);
-	cec_notifier_conn_unregister(hdmi->cec_notifier);
-	hdmi->cec_notifier = NULL;
-	mutex_unlock(&hdmi->cec_notifier_mutex);
-}
-
 static enum drm_mode_status
 dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
 			  const struct drm_display_info *info,
@@ -2996,7 +2991,6 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset = drm_atomic_helper_bridge_reset,
 	.attach = dw_hdmi_bridge_attach,
-	.detach = dw_hdmi_bridge_detach,
 	.atomic_check = dw_hdmi_bridge_atomic_check,
 	.atomic_get_output_bus_fmts = dw_hdmi_bridge_atomic_get_output_bus_fmts,
 	.atomic_get_input_bus_fmts = dw_hdmi_bridge_atomic_get_input_bus_fmts,
-- 
2.54.0

[PATCH v6 09/22] drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect

[Jonas Karlman]

Wait until the connector detect ops is called to invalidate CEC phys
addr instead of doing it directly from the irq handler.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: No change
v3: No change
v2: Collect r-b tag
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 5fd26ff8f55b..aae1b890167b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2472,7 +2472,17 @@ dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
 					     connector);
-	return dw_hdmi_detect(hdmi);
+	enum drm_connector_status status;
+
+	status = dw_hdmi_detect(hdmi);
+
+	if (status == connector_status_disconnected) {
+		mutex_lock(&hdmi->cec_notifier_mutex);
+		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+		mutex_unlock(&hdmi->cec_notifier_mutex);
+	}
+
+	return status;
 }
 
 static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
@@ -3106,12 +3116,6 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 				       phy_stat & HDMI_PHY_HPD,
 				       phy_stat & HDMI_PHY_RX_SENSE);
 
-		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) {
-			mutex_lock(&hdmi->cec_notifier_mutex);
-			cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
-			mutex_unlock(&hdmi->cec_notifier_mutex);
-		}
-
 		if ((intr_stat & HDMI_IH_PHY_STAT0_HPD) &&
 		    (phy_stat & HDMI_PHY_HPD))
 			status = connector_status_connected;
-- 
2.54.0

[PATCH v6 10/22] drm: bridge: dw_hdmi: Remove cec_notifier_mutex

[Jonas Karlman]

With CEC phys addr invalidation moved away from the irq handler there is
no longer a need for cec_notifier_mutex, remove it.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change, cec_notifier_conn_unregister() call moved
v4: No change
v3: No change
v2: Collect r-b tag
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index aae1b890167b..0dd4c823c60a 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -189,7 +189,6 @@ struct dw_hdmi {
 	void (*enable_audio)(struct dw_hdmi *hdmi);
 	void (*disable_audio)(struct dw_hdmi *hdmi);
 
-	struct mutex cec_notifier_mutex;
 	struct cec_notifier *cec_notifier;
 
 	hdmi_codec_plugged_cb plugged_cb;
@@ -2476,11 +2475,8 @@ dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
 
 	status = dw_hdmi_detect(hdmi);
 
-	if (status == connector_status_disconnected) {
-		mutex_lock(&hdmi->cec_notifier_mutex);
+	if (status == connector_status_disconnected)
 		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
-		mutex_unlock(&hdmi->cec_notifier_mutex);
-	}
 
 	return status;
 }
@@ -2542,10 +2538,8 @@ static void dw_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 
-	mutex_lock(&hdmi->cec_notifier_mutex);
 	cec_notifier_conn_unregister(hdmi->cec_notifier);
 	hdmi->cec_notifier = NULL;
-	mutex_unlock(&hdmi->cec_notifier_mutex);
 
 	drm_connector_cleanup(connector);
 	drm_bridge_put(&hdmi->bridge);
@@ -2612,9 +2606,7 @@ static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
 	if (!notifier)
 		return -ENOMEM;
 
-	mutex_lock(&hdmi->cec_notifier_mutex);
 	hdmi->cec_notifier = notifier;
-	mutex_unlock(&hdmi->cec_notifier_mutex);
 
 	return 0;
 }
@@ -3323,7 +3315,6 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 
 	mutex_init(&hdmi->mutex);
 	mutex_init(&hdmi->audio_mutex);
-	mutex_init(&hdmi->cec_notifier_mutex);
 	spin_lock_init(&hdmi->audio_lock);
 
 	ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
-- 
2.54.0

[PATCH v6 11/22] drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()

[Jonas Karlman]

Move connector EDID update and CEC phys addr handling to a helper
function as a preparation before moving EDID refresh from get_modes
funcs to detect/force funcs.

Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Pass struct dw_hdmi as a parameter, to allow calls from bridge funcs,
    Collect t-b tag
v5: No change
v4: Collect r-b tag
v3: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 27 ++++++++++++++---------
 1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0dd4c823c60a..a056e147731b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2466,6 +2466,21 @@ static const struct drm_edid *dw_hdmi_edid_read(struct dw_hdmi *hdmi,
  * DRM Connector Operations
  */
 
+static void
+dw_hdmi_connector_status_update(struct dw_hdmi *hdmi,
+				struct drm_connector *connector,
+				enum drm_connector_status status)
+{
+	const struct drm_edid *drm_edid;
+
+	drm_edid = dw_hdmi_edid_read(hdmi, connector);
+	drm_edid_connector_update(connector, drm_edid);
+	drm_edid_free(drm_edid);
+
+	cec_notifier_set_phys_addr(hdmi->cec_notifier,
+				   connector->display_info.source_physical_address);
+}
+
 static enum drm_connector_status
 dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
@@ -2485,18 +2500,10 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
 					     connector);
-	const struct drm_edid *drm_edid;
-	int ret;
 
-	drm_edid = dw_hdmi_edid_read(hdmi, connector);
+	dw_hdmi_connector_status_update(hdmi, connector, connector->status);
 
-	drm_edid_connector_update(connector, drm_edid);
-	cec_notifier_set_phys_addr(hdmi->cec_notifier,
-				   connector->display_info.source_physical_address);
-	ret = drm_edid_connector_add_modes(connector);
-	drm_edid_free(drm_edid);
-
-	return ret;
+	return drm_edid_connector_add_modes(connector);
 }
 
 static int dw_hdmi_connector_atomic_check(struct drm_connector *connector,
-- 
2.54.0

[PATCH v6 12/22] drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()

[Jonas Karlman]

Update connector EDID and CEC phys addr from detect and force funcs to
ensure that userspace always have access to latest read EDID after a
sink use a HPD low voltage pulse to indicate that EDID has changed.

With EDID being updated in detect and force funcs, there should no
longer be a need to re-read EDID in get_modes funcs, so drop it.

This change make the dw-hdmi connector work more closely like the bridge
connector does with a hdmi bridge.

Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Pass struct dw_hdmi as a parameter,
    Collect t-b tag
v5: No change
v4: Move last_connector_result assign in force ops to this patch,
    Collect r-b tag
v3: Reworked 'Update EDID during hotplug processing' patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 28 ++++++++++++-----------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a056e147731b..a4ecf830103d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2473,36 +2473,36 @@ dw_hdmi_connector_status_update(struct dw_hdmi *hdmi,
 {
 	const struct drm_edid *drm_edid;
 
+	if (status == connector_status_disconnected) {
+		drm_edid_connector_update(connector, NULL);
+		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+		return;
+	}
+
 	drm_edid = dw_hdmi_edid_read(hdmi, connector);
 	drm_edid_connector_update(connector, drm_edid);
 	drm_edid_free(drm_edid);
 
-	cec_notifier_set_phys_addr(hdmi->cec_notifier,
-				   connector->display_info.source_physical_address);
+	if (status == connector_status_connected)
+		cec_notifier_set_phys_addr(hdmi->cec_notifier,
+				connector->display_info.source_physical_address);
 }
 
 static enum drm_connector_status
 dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
-	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
-					     connector);
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 	enum drm_connector_status status;
 
 	status = dw_hdmi_detect(hdmi);
 
-	if (status == connector_status_disconnected)
-		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+	dw_hdmi_connector_status_update(hdmi, connector, status);
 
 	return status;
 }
 
 static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
 {
-	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
-					     connector);
-
-	dw_hdmi_connector_status_update(hdmi, connector, connector->status);
-
 	return drm_edid_connector_add_modes(connector);
 }
 
@@ -2532,13 +2532,15 @@ static int dw_hdmi_connector_atomic_check(struct drm_connector *connector,
 
 static void dw_hdmi_connector_force(struct drm_connector *connector)
 {
-	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
-					     connector);
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 
 	mutex_lock(&hdmi->mutex);
 	hdmi->force = connector->force;
+	hdmi->last_connector_result = connector->status;
 	dw_hdmi_update_phy_mask(hdmi);
 	mutex_unlock(&hdmi->mutex);
+
+	dw_hdmi_connector_status_update(hdmi, connector, connector->status);
 }
 
 static void dw_hdmi_connector_destroy(struct drm_connector *connector)
-- 
2.54.0

[PATCH v6 13/22] drm: bridge: dw_hdmi: Use generic CEC notifier helpers

[Jonas Karlman]

The commit 8b1a8f8b2002 ("drm/display: add CEC helpers code") added
generic CEC helpers to be used by HDMI drivers.

Replace the open-coded CEC notifier handling with use of the generic CEC
notifier helpers. Ensure DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER is also
selected when DRM_DW_HDMI_CEC is enabled so that the CEC helpers is
available.

The drmm release action for the generic CEC notifier should run just
before dw_hdmi_connector_destroy(), closely matching the lifetime of
the replaced CEC notifier and the connector.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Update commit message,
    Collect t-b tag
v5: Collect r-b tag
v4: New patch
---
 drivers/gpu/drm/bridge/synopsys/Kconfig   |  1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 26 +++++------------------
 2 files changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index a46df7583bcf..e6723af03b43 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -49,6 +49,7 @@ config DRM_DW_HDMI_CEC
 	depends on DRM_DW_HDMI
 	select CEC_CORE
 	select CEC_NOTIFIER
+	select DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER
 	help
 	  Support the CE interface which is part of the Synopsys
 	  Designware HDMI block.
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a4ecf830103d..2bb043d64b65 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -23,12 +23,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 
-#include <media/cec-notifier.h>
-
 #include <linux/media-bus-format.h>
 #include <linux/videodev2.h>
 
 #include <drm/bridge/dw_hdmi.h>
+#include <drm/display/drm_hdmi_cec_helper.h>
 #include <drm/display/drm_hdmi_helper.h>
 #include <drm/display/drm_scdc_helper.h>
 #include <drm/drm_atomic.h>
@@ -189,8 +188,6 @@ struct dw_hdmi {
 	void (*enable_audio)(struct dw_hdmi *hdmi);
 	void (*disable_audio)(struct dw_hdmi *hdmi);
 
-	struct cec_notifier *cec_notifier;
-
 	hdmi_codec_plugged_cb plugged_cb;
 	struct device *codec_dev;
 	enum drm_connector_status last_connector_result;
@@ -2475,7 +2472,7 @@ dw_hdmi_connector_status_update(struct dw_hdmi *hdmi,
 
 	if (status == connector_status_disconnected) {
 		drm_edid_connector_update(connector, NULL);
-		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+		drm_connector_cec_phys_addr_invalidate(connector);
 		return;
 	}
 
@@ -2484,8 +2481,7 @@ dw_hdmi_connector_status_update(struct dw_hdmi *hdmi,
 	drm_edid_free(drm_edid);
 
 	if (status == connector_status_connected)
-		cec_notifier_set_phys_addr(hdmi->cec_notifier,
-				connector->display_info.source_physical_address);
+		drm_connector_cec_phys_addr_set(connector);
 }
 
 static enum drm_connector_status
@@ -2547,9 +2543,6 @@ static void dw_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 
-	cec_notifier_conn_unregister(hdmi->cec_notifier);
-	hdmi->cec_notifier = NULL;
-
 	drm_connector_cleanup(connector);
 	drm_bridge_put(&hdmi->bridge);
 }
@@ -2572,8 +2565,6 @@ static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs =
 static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
 {
 	struct drm_connector *connector = &hdmi->connector;
-	struct cec_connector_info conn_info;
-	struct cec_notifier *notifier;
 	int ret;
 
 	if (hdmi->version >= 0x200a)
@@ -2609,15 +2600,8 @@ static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
 
 	drm_connector_attach_encoder(connector, hdmi->bridge.encoder);
 
-	cec_fill_conn_info_from_drm(&conn_info, connector);
-
-	notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info);
-	if (!notifier)
-		return -ENOMEM;
-
-	hdmi->cec_notifier = notifier;
-
-	return 0;
+	return drmm_connector_hdmi_cec_notifier_register(connector, NULL,
+							 hdmi->dev);
 }
 
 /* -----------------------------------------------------------------------------
-- 
2.54.0

[PATCH v6 14/22] drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()

[Jonas Karlman]

Update EDID and CEC phys addr in the bridge detect() func to closely
match the behavior of a bridge connector with a HDMI bridge attached
and the dw-hdmi connector.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: New patch

This is a temporary change until dw-hdmi is fully converted into a
HDMI bridge in a future part of this multi-series effort.
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 2bb043d64b65..3649ccf8d994 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2969,8 +2969,17 @@ static enum drm_connector_status
 dw_hdmi_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = bridge->driver_private;
+	enum drm_connector_status status;
 
-	return dw_hdmi_detect(hdmi);
+	status = dw_hdmi_detect(hdmi);
+
+	/*
+	 * Update EDID and CEC phys addr to match the behavior of a bridge
+	 * connector with a HDMI bridge attached and the dw-hdmi connector.
+	 */
+	dw_hdmi_connector_status_update(hdmi, connector, status);
+
+	return status;
 }
 
 static const struct drm_edid *dw_hdmi_bridge_edid_read(struct drm_bridge *bridge,
-- 
2.54.0

[PATCH v6 15/22] drm: bridge: dw_hdmi: Declare bridge CEC notifier support

[Jonas Karlman]

EDID and CEC phys addr is now being updated in bridge detect() func,
making it possible to have CEC notifier support using the bridge
connector.

Add the CEC notifier bridge op to instruct the bridge connector to make
use of the generic CEC notifier helpers.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 3649ccf8d994..1402b3963ae1 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3537,6 +3537,9 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 		pdevinfo.dma_mask = 0;
 
 		hdmi->cec = platform_device_register_full(&pdevinfo);
+
+		hdmi->bridge.ops |= DRM_BRIDGE_OP_HDMI_CEC_NOTIFIER;
+		hdmi->bridge.hdmi_cec_dev = hdmi->dev;
 	}
 
 	drm_bridge_add(&hdmi->bridge);
-- 
2.54.0

[PATCH v6 16/22] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio

[Jonas Karlman]

drm_edid_connector_update() is being called from bridge connector funcs
and from detect and force funcs for dw-hdmi connector.

Change to use is_hdmi and has_audio from display_info directly instead
of keeping our own state in sink_is_hdmi and sink_has_audio.

Also remove the old and unused edid struct member and related define.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: Collect r-b tag
v3: No change
v2: Collect r-b tag
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 32 ++++-------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 1402b3963ae1..e9c4e24c090c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -45,8 +45,6 @@
 #define DDC_CI_ADDR		0x37
 #define DDC_SEGMENT_ADDR	0x30
 
-#define HDMI_EDID_LEN		512
-
 /* DW-HDMI Controller >= 0x200a are at least compliant with SCDC version 1 */
 #define SCDC_MIN_SOURCE_VERSION	0x1
 
@@ -146,8 +144,6 @@ struct dw_hdmi {
 
 	int vic;
 
-	u8 edid[HDMI_EDID_LEN];
-
 	struct {
 		const struct dw_hdmi_phy_ops *ops;
 		const char *name;
@@ -157,8 +153,6 @@ struct dw_hdmi {
 
 	struct i2c_adapter *ddc;
 	void __iomem *regs;
-	bool sink_is_hdmi;
-	bool sink_has_audio;
 
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *default_state;
@@ -2053,7 +2047,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 		HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
 		HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
 
-	inv_val |= hdmi->sink_is_hdmi ?
+	inv_val |= display->is_hdmi ?
 		HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
 		HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
 
@@ -2289,7 +2283,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
 		hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 
-	hdmi->hdmi_data.rgb_limited_range = hdmi->sink_is_hdmi &&
+	hdmi->hdmi_data.rgb_limited_range = display->is_hdmi &&
 		drm_default_rgb_quant_range(mode) ==
 		HDMI_QUANTIZATION_RANGE_LIMITED;
 
@@ -2309,7 +2303,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	/* HDMI Initialization Step B.3 */
 	dw_hdmi_enable_video_path(hdmi);
 
-	if (hdmi->sink_has_audio) {
+	if (display->has_audio) {
 		dev_dbg(hdmi->dev, "sink has audio support\n");
 
 		/* HDMI Initialization Step E - Configure audio */
@@ -2318,7 +2312,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	}
 
 	/* not for DVI mode */
-	if (hdmi->sink_is_hdmi) {
+	if (display->is_hdmi) {
 		dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
 
 		/* HDMI Initialization Step F - Configure AVI InfoFrame */
@@ -2432,29 +2426,13 @@ static const struct drm_edid *dw_hdmi_edid_read(struct dw_hdmi *hdmi,
 						struct drm_connector *connector)
 {
 	const struct drm_edid *drm_edid;
-	const struct edid *edid;
 
 	if (!hdmi->ddc)
 		return NULL;
 
 	drm_edid = drm_edid_read_ddc(connector, hdmi->ddc);
-	if (!drm_edid) {
+	if (!drm_edid)
 		dev_dbg(hdmi->dev, "failed to get edid\n");
-		return NULL;
-	}
-
-	/*
-	 * FIXME: This should use connector->display_info.is_hdmi and
-	 * connector->display_info.has_audio from a path that has read the EDID
-	 * and called drm_edid_connector_update().
-	 */
-	edid = drm_edid_raw(drm_edid);
-
-	dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
-		edid->width_cm, edid->height_cm);
-
-	hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
-	hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
 
 	return drm_edid;
 }
-- 
2.54.0

[PATCH v6 17/22] drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()

[Jonas Karlman]

The use of calls to both drm_helper_hpd_irq_event() and
drm_bridge_hpd_notify() from the HPD IRQ handler may cause multiple
hotplug uevents and modesets when the bridge connector is used.

Use of drm_helper_hpd_irq_event() cause the internal DRM function
check_connector_changed() to be called, which in turn calls the
connector detect()/force() funcs to detect any connection status or
epoch changes, and when changed trigger a hotplug uevent. This also
help ensure that EDID and CEC phys addr is updated.

If only a call drm_bridge_hpd_notify() would be used, a custom connector
status/EDID change detection logic needs to be implemented, to fully
match what check_connector_changed() already provides.

The bridge connector detect() func also ensures that any hpd_notify()
funcs are called for all bridges in the chain, so there is not really
any need to have a call to drm_bridge_hpd_notify() here.

With both calls there is two hotplug uevents, two modesets and a total
of four .hpd_notify() calls (using a bridge connector):

  dw_hdmi_irq(): EVENT=plugout
  drm_helper_hpd_irq_event():
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:check_connector_changed] [CONNECTOR:46:HDMI-A-1] status updated from connected to disconnected
    [drm:check_connector_changed] [CONNECTOR:46:HDMI-A-1] Changed epoch counter 1 => 2
    [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:46:HDMI-A-1] generating connector hotplug event
   drm_client_hotplug():
    [drm:drm_fb_helper_hotplug_event]
    [drm:drm_client_modeset_probe]
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1]
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected
    [drm:drm_edid_connector_update] [CONNECTOR:46:HDMI-A-1] EDID changed, epoch counter 3
    [drm:drm_client_modeset_probe] No connectors reported connected with modes
    [drm:drm_client_modeset_probe] [CONNECTOR:46:HDMI-A-1] enabled? no
    [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
    [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
    [drm:drm_client_hotplug] fbdev: ret=0
  drm_bridge_hpd_notify():
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:46:HDMI-A-1] generating connector hotplug event
   drm_client_hotplug():
    [drm:drm_fb_helper_hotplug_event]
    [drm:drm_client_modeset_probe]
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1]
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected
    [drm:drm_client_modeset_probe] No connectors reported connected with modes
    [drm:drm_client_modeset_probe] [CONNECTOR:46:HDMI-A-1] enabled? no
    [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
    [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
    [drm:drm_client_hotplug] fbdev: ret=0

Change to only call drm_helper_hpd_irq_event() from HPD IRQ handler to
ensure that only one hotplug uevent is sent to userspace when connection
status or EDID changes.

With only a call the drm_helper_hpd_irq_event() there is only a single
hotplug uevent and only two .hpd_notify() calls:

  dw_hdmi_irq(): EVENT=plugout
  drm_helper_hpd_irq_event():
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:check_connector_changed] [CONNECTOR:46:HDMI-A-1] status updated from connected to disconnected
    [drm:check_connector_changed] [CONNECTOR:46:HDMI-A-1] Changed epoch counter 1 => 2
    [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:46:HDMI-A-1] generating connector hotplug event
   drm_client_hotplug():
    [drm:drm_fb_helper_hotplug_event]
    [drm:drm_client_modeset_probe]
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1]
    dw_hdmi_bridge_hpd_notify(status=2)
    [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-1] disconnected
    [drm:drm_edid_connector_update] [CONNECTOR:46:HDMI-A-1] EDID changed, epoch counter 3
    [drm:drm_client_modeset_probe] No connectors reported connected with modes
    [drm:drm_client_modeset_probe] [CONNECTOR:46:HDMI-A-1] enabled? no
    [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
    [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
    [drm:drm_client_hotplug] fbdev: ret=0

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Drop the call from IRQ handler instead, prior to use of a HPD
    delayed work to avoid a possible deadlock with use of sync() calls
    in the bridge hpd_disable() ops,
    Update commit message,
    Collect t-b tag
v5: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index e9c4e24c090c..6cc7b2a860bd 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3101,10 +3101,8 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 			status == connector_status_connected ?
 			"plugin" : "plugout");
 
-		if (hdmi->bridge.dev) {
+		if (hdmi->bridge.dev)
 			drm_helper_hpd_irq_event(hdmi->bridge.dev);
-			drm_bridge_hpd_notify(&hdmi->bridge, status);
-		}
 	}
 
 	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
-- 
2.54.0

[PATCH v6 18/22] drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event

[Jonas Karlman]

HDMI Specification Version 1.4b chapter 8.5 mentions:

  An HDMI Sink shall not assert high voltage level on its Hot Plug
  Detect pin when the E-EDID is not available for reading.

  A Source may use a high voltage level Hot Plug Detect signal to
  initiate the reading of E-EDID data.

  An HDMI Sink shall indicate any change to the contents of the E-EDID
  by driving a low voltage level pulse on the Hot Plug Detect pin. This
  pulse shall be at least 100 msec.

Use a delayed work to debounce reacting on HPD events to improve
handling of a HPD low voltage level pulse when a sink changes the EDID.

The delayed work is only enabled between enable_hpd()/hpd_enable() and
disable_hpd()/hpd_disable() calls from core, i.e. enabled after
attach/bind/resume and disabled before detach/unbind/suspend.

The 1100 msec hotplug debounce timeout was arbitrarily picked to match
other drivers using same const, and testing using a Raspberry Pi Monitor
seem to use a 200-300 msec pulse when going from standby to power on
state.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Change back to disable_delayed_work_sync() in hpd disable ops,
    Ensure HPD interrupt is masked and IRQ handler is disabled early
    in dw_hdmi_remove() to prevent any irq re-arming of delayed work,
    Drop use of suspend helper
v5: Change to none-sync disable_delayed_work() in hpd disable ops,
    Change to cancel_delayed_work_sync() in remove,
    Add cancel_delayed_work_sync() to new suspend helper
v4: Disable/mask delayed_work until enable_hpd()/hpd_enable(),
    Read connector status directly from HW regs in hpd_work
v3: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 76 +++++++++++++++++++++--
 1 file changed, 71 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 6cc7b2a860bd..300dac4a6c35 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -50,6 +50,8 @@
 
 #define HDMI14_MAX_TMDSCLK	340000000
 
+#define HOTPLUG_DEBOUNCE_MS	1100
+
 static const u16 csc_coeff_default[3][4] = {
 	{ 0x2000, 0x0000, 0x0000, 0x0000 },
 	{ 0x0000, 0x2000, 0x0000, 0x0000 },
@@ -185,6 +187,7 @@ struct dw_hdmi {
 	hdmi_codec_plugged_cb plugged_cb;
 	struct device *codec_dev;
 	enum drm_connector_status last_connector_result;
+	struct delayed_work hpd_work;
 };
 
 const struct dw_hdmi_plat_data *dw_hdmi_to_plat_data(struct dw_hdmi *hdmi)
@@ -2517,6 +2520,20 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
 	dw_hdmi_connector_status_update(hdmi, connector, connector->status);
 }
 
+static void dw_hdmi_connector_enable_hpd(struct drm_connector *connector)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
+
+	enable_delayed_work(&hdmi->hpd_work);
+}
+
+static void dw_hdmi_connector_disable_hpd(struct drm_connector *connector)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
+
+	disable_delayed_work_sync(&hdmi->hpd_work);
+}
+
 static void dw_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
@@ -2538,6 +2555,8 @@ static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
 static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
 	.get_modes = dw_hdmi_connector_get_modes,
 	.atomic_check = dw_hdmi_connector_atomic_check,
+	.enable_hpd = dw_hdmi_connector_enable_hpd,
+	.disable_hpd = dw_hdmi_connector_disable_hpd,
 };
 
 static int dw_hdmi_connector_create(struct dw_hdmi *hdmi)
@@ -2968,6 +2987,20 @@ static const struct drm_edid *dw_hdmi_bridge_edid_read(struct drm_bridge *bridge
 	return dw_hdmi_edid_read(hdmi, connector);
 }
 
+static void dw_hdmi_bridge_hpd_enable(struct drm_bridge *bridge)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+
+	enable_delayed_work(&hdmi->hpd_work);
+}
+
+static void dw_hdmi_bridge_hpd_disable(struct drm_bridge *bridge)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+
+	disable_delayed_work_sync(&hdmi->hpd_work);
+}
+
 static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
@@ -2981,6 +3014,8 @@ static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
 	.mode_valid = dw_hdmi_bridge_mode_valid,
 	.detect = dw_hdmi_bridge_detect,
 	.edid_read = dw_hdmi_bridge_edid_read,
+	.hpd_enable = dw_hdmi_bridge_hpd_enable,
+	.hpd_disable = dw_hdmi_bridge_hpd_disable,
 };
 
 /* -----------------------------------------------------------------------------
@@ -3101,8 +3136,8 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 			status == connector_status_connected ?
 			"plugin" : "plugout");
 
-		if (hdmi->bridge.dev)
-			drm_helper_hpd_irq_event(hdmi->bridge.dev);
+		mod_delayed_work(system_percpu_wq, &hdmi->hpd_work,
+				 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
 	}
 
 	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
@@ -3112,6 +3147,29 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void dw_hdmi_hpd_work(struct work_struct *work)
+{
+	struct dw_hdmi *hdmi = container_of(work, struct dw_hdmi, hpd_work.work);
+	struct drm_device *dev = hdmi->bridge.dev;
+
+	if (WARN_ON(!dev))
+		return;
+
+	/*
+	 * Notify the DRM core of the HPD event using drm_helper_hpd_irq_event()
+	 * instead of drm_bridge_hpd_notify(). This will cause the DRM function
+	 * check_connector_changed() to be called, which in turn calls the
+	 * connector detect()/force() funcs to detect any connection status or
+	 * epoch changes. The bridge connector detect() func also ensures that
+	 * any hpd_notify() funcs are called for all bridges in the chain.
+	 *
+	 * drm_bridge_hpd_notify() shares a mutex with drm_bridge_hpd_disable(),
+	 * and can result in a deadlock due to the disable_delayed_work_sync()
+	 * call to wait on work to complete in dw_hdmi_bridge_hpd_disable().
+	 */
+	drm_helper_hpd_irq_event(dev);
+}
+
 static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
 	{
 		.type = DW_HDMI_PHY_DWC_HDMI_TX_PHY,
@@ -3396,6 +3454,9 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 		goto err_res;
 	}
 
+	INIT_DELAYED_WORK(&hdmi->hpd_work, dw_hdmi_hpd_work);
+	disable_delayed_work(&hdmi->hpd_work);
+
 	ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
 					dw_hdmi_irq, IRQF_SHARED,
 					dev_name(dev), hdmi);
@@ -3531,6 +3592,14 @@ EXPORT_SYMBOL_GPL(dw_hdmi_probe);
 
 void dw_hdmi_remove(struct dw_hdmi *hdmi)
 {
+	struct platform_device *pdev = to_platform_device(hdmi->dev);
+	int irq = platform_get_irq(pdev, 0);
+
+	/* Disable cable hot plug irq. */
+	hdmi_writeb(hdmi, ~0, HDMI_PHY_MASK0);
+	devm_free_irq(hdmi->dev, irq, hdmi);
+	cancel_delayed_work_sync(&hdmi->hpd_work);
+
 	drm_bridge_remove(&hdmi->bridge);
 
 	if (hdmi->audio && !IS_ERR(hdmi->audio))
@@ -3538,9 +3607,6 @@ void dw_hdmi_remove(struct dw_hdmi *hdmi)
 	if (!IS_ERR(hdmi->cec))
 		platform_device_unregister(hdmi->cec);
 
-	/* Disable all interrupts */
-	hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
-
 	if (hdmi->i2c)
 		i2c_del_adapter(&hdmi->i2c->adap);
 	else
-- 
2.54.0

[PATCH v6 19/22] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling

[Jonas Karlman]

The commit aeac23bda87f ("drm: bridge/dw_hdmi: improve HDMI
enable/disable handling") added use of PHY RXSENSE indications to avoid
triggering a full enable/disable of the HDMI block when a sink use a HPD
low voltage level pulse to indicate changes of the EDID.

HDMI Specification Version 1.4b chapter 8.5 mentions:

  An HDMI Sink shall indicate any change to the contents of the E-EDID
  by driving a low voltage level pulse on the Hot Plug Detect pin. This
  pulse shall be at least 100 msec.

A delayed work is now used to debounce reacting on a HPD low voltage
level pulse when a sink changes the EDID. The delayed work triggers a
hotplug uevent every time the connection status or EDID has changed.

Remove RXSENSE handling to simplify the HPD interrupt handling and
instead depend on the delayed work to detect any connection status or
EDID changes.

This also ensures the initial HPD interrupt polarity is based on current
HPD status to avoid an unnecessary interrupt from being triggered
immediately at probe or resume when a sink is connected.

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Update commit message,
    Collect t-b tag
v5: Add comment about interrupt generation
v4: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 144 ++++------------------
 1 file changed, 21 insertions(+), 123 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 300dac4a6c35..39e94d22249b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -161,11 +161,7 @@ struct dw_hdmi {
 	struct pinctrl_state *unwedge_state;
 
 	struct mutex mutex;		/* for state below */
-	enum drm_connector_force force;	/* mutex-protected force state */
 	struct drm_connector *curr_conn;/* current connector (only valid when !disabled) */
-	bool disabled;			/* DRM has disabled our bridge */
-	bool rxsense;			/* rxsense state */
-	u8 phy_mask;			/* desired phy int mask settings */
 	u8 mc_clkdis;			/* clock disable register */
 
 	spinlock_t audio_lock;
@@ -196,14 +192,6 @@ const struct dw_hdmi_plat_data *dw_hdmi_to_plat_data(struct dw_hdmi *hdmi)
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_to_plat_data);
 
-#define HDMI_IH_PHY_STAT0_RX_SENSE \
-	(HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \
-	 HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3)
-
-#define HDMI_PHY_RX_SENSE \
-	(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
-	 HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
-
 static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
 {
 	regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
@@ -1702,36 +1690,25 @@ EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
 void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
 			    bool force, bool disabled, bool rxsense)
 {
-	u8 old_mask = hdmi->phy_mask;
-
-	if (force || disabled || !rxsense)
-		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
-	else
-		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
-
-	if (old_mask != hdmi->phy_mask)
-		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
 
 void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
 {
 	/*
-	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
-	 * any pending interrupt.
+	 * Configure the PHY HPD interrupt polarity based on current HPD status
+	 * and clear any pending interrupt.
 	 */
-	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
-	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
-		    HDMI_IH_PHY_STAT0);
+	hdmi_modb(hdmi, hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
+		  0 : HDMI_PHY_HPD, HDMI_PHY_HPD, HDMI_PHY_POL0);
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD, HDMI_IH_PHY_STAT0);
 
 	/* Enable cable hot plug irq. */
-	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+	hdmi_writeb(hdmi, ~HDMI_PHY_HPD, HDMI_PHY_MASK0);
 
 	/* Clear and unmute interrupts. */
-	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
-		    HDMI_IH_PHY_STAT0);
-	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
-		    HDMI_IH_MUTE_PHY_STAT0);
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD, HDMI_IH_PHY_STAT0);
+	hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
 
@@ -2395,26 +2372,6 @@ static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
 	}
 }
 
-/*
- * Adjust the detection of RXSENSE according to whether we have a forced
- * connection mode enabled, or whether we have been disabled.  There is
- * no point processing RXSENSE interrupts if we have a forced connection
- * state, or DRM has us disabled.
- *
- * We also disable rxsense interrupts when we think we're disconnected
- * to avoid floating TDMS signals giving false rxsense interrupts.
- *
- * Note: we still need to listen for HPD interrupts even when DRM has us
- * disabled so that we can detect a connect event.
- */
-static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
-{
-	if (hdmi->phy.ops->update_hpd)
-		hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
-					  hdmi->force, hdmi->disabled,
-					  hdmi->rxsense);
-}
-
 static enum drm_connector_status dw_hdmi_detect(struct dw_hdmi *hdmi)
 {
 	enum drm_connector_status result;
@@ -2512,9 +2469,7 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
 	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi, connector);
 
 	mutex_lock(&hdmi->mutex);
-	hdmi->force = connector->force;
 	hdmi->last_connector_result = connector->status;
-	dw_hdmi_update_phy_mask(hdmi);
 	mutex_unlock(&hdmi->mutex);
 
 	dw_hdmi_connector_status_update(hdmi, connector, connector->status);
@@ -2932,10 +2887,8 @@ static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
 	struct dw_hdmi *hdmi = bridge->driver_private;
 
 	mutex_lock(&hdmi->mutex);
-	hdmi->disabled = true;
 	hdmi->curr_conn = NULL;
 	dw_hdmi_poweroff(hdmi);
-	dw_hdmi_update_phy_mask(hdmi);
 	handle_plugged_change(hdmi, false);
 	mutex_unlock(&hdmi->mutex);
 }
@@ -2954,10 +2907,8 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
 	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
 
 	mutex_lock(&hdmi->mutex);
-	hdmi->disabled = false;
 	hdmi->curr_conn = connector;
 	dw_hdmi_poweron(hdmi, connector, mode);
-	dw_hdmi_update_phy_mask(hdmi);
 	handle_plugged_change(hdmi, true);
 	mutex_unlock(&hdmi->mutex);
 }
@@ -3060,78 +3011,29 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
 
 void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
 {
-	mutex_lock(&hdmi->mutex);
-
-	if (!hdmi->force) {
-		/*
-		 * If the RX sense status indicates we're disconnected,
-		 * clear the software rxsense status.
-		 */
-		if (!rx_sense)
-			hdmi->rxsense = false;
-
-		/*
-		 * Only set the software rxsense status when both
-		 * rxsense and hpd indicates we're connected.
-		 * This avoids what seems to be bad behaviour in
-		 * at least iMX6S versions of the phy.
-		 */
-		if (hpd)
-			hdmi->rxsense = true;
-
-		dw_hdmi_update_phy_mask(hdmi);
-	}
-	mutex_unlock(&hdmi->mutex);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
 
 static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 {
 	struct dw_hdmi *hdmi = dev_id;
-	u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
-	enum drm_connector_status status = connector_status_unknown;
-
-	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-	phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
-	phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0);
-
-	phy_pol_mask = 0;
-	if (intr_stat & HDMI_IH_PHY_STAT0_HPD)
-		phy_pol_mask |= HDMI_PHY_HPD;
-	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0)
-		phy_pol_mask |= HDMI_PHY_RX_SENSE0;
-	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1)
-		phy_pol_mask |= HDMI_PHY_RX_SENSE1;
-	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2)
-		phy_pol_mask |= HDMI_PHY_RX_SENSE2;
-	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3)
-		phy_pol_mask |= HDMI_PHY_RX_SENSE3;
-
-	if (phy_pol_mask)
-		hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0);
+	u8 intr_stat;
 
 	/*
-	 * RX sense tells us whether the TDMS transmitters are detecting
-	 * load - in other words, there's something listening on the
-	 * other end of the link.  Use this to decide whether we should
-	 * power on the phy as HPD may be toggled by the sink to merely
-	 * ask the source to re-read the EDID.
+	 * Interrupt generation is accomplished in the following way:
+	 *   interrupt = (mask == 0) && (polarity == status)
+	 * All interrupts are forwarded to the Interrupt Handler sticky bit
+	 * register ih_phy_stat0 and muted using the register ih_mute_phy_stat0.
 	 */
-	if (intr_stat &
-	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
-		dw_hdmi_setup_rx_sense(hdmi,
-				       phy_stat & HDMI_PHY_HPD,
-				       phy_stat & HDMI_PHY_RX_SENSE);
+	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
+	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
+		enum drm_connector_status status;
 
-		if ((intr_stat & HDMI_IH_PHY_STAT0_HPD) &&
-		    (phy_stat & HDMI_PHY_HPD))
-			status = connector_status_connected;
+		/* Set HPD interrupt polarity based on current HPD status. */
+		status = dw_hdmi_phy_read_hpd(hdmi, hdmi->phy.data);
+		hdmi_modb(hdmi, status == connector_status_connected ?
+			  0 : HDMI_PHY_HPD, HDMI_PHY_HPD, HDMI_PHY_POL0);
 
-		if (!(phy_stat & (HDMI_PHY_HPD | HDMI_PHY_RX_SENSE)))
-			status = connector_status_disconnected;
-	}
-
-	if (status != connector_status_unknown) {
 		dev_dbg(hdmi->dev, "EVENT=%s\n",
 			status == connector_status_connected ?
 			"plugin" : "plugout");
@@ -3141,8 +3043,7 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 	}
 
 	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
-	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
-		    HDMI_IH_MUTE_PHY_STAT0);
+	hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
 
 	return IRQ_HANDLED;
 }
@@ -3343,9 +3244,6 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 	hdmi->dev = dev;
 	hdmi->sample_rate = 48000;
 	hdmi->channels = 2;
-	hdmi->disabled = true;
-	hdmi->rxsense = true;
-	hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE);
 	hdmi->mc_clkdis = 0x7f;
 	hdmi->last_connector_result = connector_status_disconnected;
 
-- 
2.54.0

[PATCH v6 20/22] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()

[Jonas Karlman]

The dw_hdmi_setup_rx_sense() helper is empty and no longer needed after
recent RXSENSE and HPD rework, remove it.

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 -----
 drivers/gpu/drm/meson/meson_dw_hdmi.c     | 3 ---
 include/drm/bridge/dw_hdmi.h              | 2 --
 3 files changed, 10 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 39e94d22249b..59864b9084f6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3009,11 +3009,6 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
 	return ret;
 }
 
-void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
-{
-}
-EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
-
 static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 {
 	struct dw_hdmi *hdmi = dev_id;
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index fef1702acb14..2a8756da569b 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -524,9 +524,6 @@ static irqreturn_t dw_hdmi_top_thread_irq(int irq, void *dev_id)
 		if (stat & HDMITX_TOP_INTR_HPD_RISE)
 			hpd_connected = true;
 
-		dw_hdmi_setup_rx_sense(dw_hdmi->hdmi, hpd_connected,
-				       hpd_connected);
-
 		drm_helper_hpd_irq_event(dw_hdmi->bridge->dev);
 		drm_bridge_hpd_notify(dw_hdmi->bridge,
 				      hpd_connected ? connector_status_connected
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 8500dd4f99d8..a612b9fa6dbb 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -186,8 +186,6 @@ struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
 
 void dw_hdmi_resume(struct dw_hdmi *hdmi);
 
-void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
-
 int dw_hdmi_set_plugged_cb(struct dw_hdmi *hdmi, hdmi_codec_plugged_cb fn,
 			   struct device *codec_dev);
 void dw_hdmi_set_sample_non_pcm(struct dw_hdmi *hdmi, unsigned int non_pcm);
-- 
2.54.0

[PATCH v6 21/22] drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()

[Jonas Karlman]

The dw_hdmi_phy_update_hpd() helper is empty and no longer needed after
recent RXSENSE and HPD rework, remove it.

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect t-b tag
v5: No change
v4: New patch
---
 drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 1 -
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c   | 7 -------
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 --
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c      | 2 --
 include/drm/bridge/dw_hdmi.h                | 4 ----
 5 files changed, 16 deletions(-)

diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
index 8e8cfd66f23b..20d389dbfdc5 100644
--- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c
@@ -78,7 +78,6 @@ static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = {
 	.disable	= imx8mp_hdmi_phy_disable,
 	.setup_hpd	= im8mp_hdmi_phy_setup_hpd,
 	.read_hpd	= dw_hdmi_phy_read_hpd,
-	.update_hpd	= dw_hdmi_phy_update_hpd,
 };
 
 static int imx8mp_dw_hdmi_bind(struct device *dev)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 59864b9084f6..79851ae27496 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1687,12 +1687,6 @@ enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
 
-void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
-			    bool force, bool disabled, bool rxsense)
-{
-}
-EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
-
 void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
 {
 	/*
@@ -1716,7 +1710,6 @@ static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
 	.init = dw_hdmi_phy_init,
 	.disable = dw_hdmi_phy_disable,
 	.read_hpd = dw_hdmi_phy_read_hpd,
-	.update_hpd = dw_hdmi_phy_update_hpd,
 	.setup_hpd = dw_hdmi_phy_setup_hpd,
 };
 
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 0dc1eb5d2ae3..7136e713df2e 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -413,7 +413,6 @@ static const struct dw_hdmi_phy_ops rk3228_hdmi_phy_ops = {
 	.init		= dw_hdmi_rockchip_genphy_init,
 	.disable	= dw_hdmi_rockchip_genphy_disable,
 	.read_hpd	= dw_hdmi_phy_read_hpd,
-	.update_hpd	= dw_hdmi_phy_update_hpd,
 	.setup_hpd	= dw_hdmi_rk3228_setup_hpd,
 };
 
@@ -449,7 +448,6 @@ static const struct dw_hdmi_phy_ops rk3328_hdmi_phy_ops = {
 	.init		= dw_hdmi_rockchip_genphy_init,
 	.disable	= dw_hdmi_rockchip_genphy_disable,
 	.read_hpd	= dw_hdmi_rk3328_read_hpd,
-	.update_hpd	= dw_hdmi_phy_update_hpd,
 	.setup_hpd	= dw_hdmi_rk3328_setup_hpd,
 };
 
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 4fa69c463dc4..2ac99b8ce8c4 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -221,7 +221,6 @@ static const struct dw_hdmi_phy_ops sun8i_a83t_hdmi_phy_ops = {
 	.init		= sun8i_a83t_hdmi_phy_config,
 	.disable	= sun8i_a83t_hdmi_phy_disable,
 	.read_hpd	= dw_hdmi_phy_read_hpd,
-	.update_hpd	= dw_hdmi_phy_update_hpd,
 	.setup_hpd	= dw_hdmi_phy_setup_hpd,
 };
 
@@ -395,7 +394,6 @@ static const struct dw_hdmi_phy_ops sun8i_h3_hdmi_phy_ops = {
 	.init		= sun8i_h3_hdmi_phy_config,
 	.disable	= sun8i_h3_hdmi_phy_disable,
 	.read_hpd	= dw_hdmi_phy_read_hpd,
-	.update_hpd	= dw_hdmi_phy_update_hpd,
 	.setup_hpd	= dw_hdmi_phy_setup_hpd,
 };
 
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index a612b9fa6dbb..10013b8d3adb 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -118,8 +118,6 @@ struct dw_hdmi_phy_ops {
 		    const struct drm_display_mode *mode);
 	void (*disable)(struct dw_hdmi *hdmi, void *data);
 	enum drm_connector_status (*read_hpd)(struct dw_hdmi *hdmi, void *data);
-	void (*update_hpd)(struct dw_hdmi *hdmi, void *data,
-			   bool force, bool disabled, bool rxsense);
 	void (*setup_hpd)(struct dw_hdmi *hdmi, void *data);
 };
 
@@ -213,8 +211,6 @@ void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi);
 
 enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
 					       void *data);
-void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
-			    bool force, bool disabled, bool rxsense);
 void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
 
 bool dw_hdmi_bus_fmt_is_420(struct dw_hdmi *hdmi);
-- 
2.54.0

[PATCH v6 22/22] drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers

[Jonas Karlman]

The bottom half IRQ handler only modify delay of or queue a delayed work
used for HPD handling. The mod_delayed_work() called is documented as
being safe to call from any context including IRQ handler.

Merge top and bottom half IRQ handlers to simplify IRQ handling now that
HPD event is handled using a delayed work.

Tested-by: Diederik de Haas <diederik@cknow-tech.com>  # Rock64, RockPro64, Quartz64-B
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v6: Collect r-b tag
v5: No change
v4: New patch
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 34 ++++++++---------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 79851ae27496..a9b2707149b6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2993,30 +2993,18 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
 	if (hdmi->i2c)
 		ret = dw_hdmi_i2c_irq(hdmi);
 
-	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-	if (intr_stat) {
-		hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
-		return IRQ_WAKE_THREAD;
-	}
-
-	return ret;
-}
-
-static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
-{
-	struct dw_hdmi *hdmi = dev_id;
-	u8 intr_stat;
-
 	/*
 	 * Interrupt generation is accomplished in the following way:
 	 *   interrupt = (mask == 0) && (polarity == status)
 	 * All interrupts are forwarded to the Interrupt Handler sticky bit
 	 * register ih_phy_stat0 and muted using the register ih_mute_phy_stat0.
 	 */
-	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
-	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
+	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0) & HDMI_IH_PHY_STAT0_HPD;
+	if (intr_stat) {
 		enum drm_connector_status status;
 
+		hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
+
 		/* Set HPD interrupt polarity based on current HPD status. */
 		status = dw_hdmi_phy_read_hpd(hdmi, hdmi->phy.data);
 		hdmi_modb(hdmi, status == connector_status_connected ?
@@ -3028,12 +3016,13 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
 
 		mod_delayed_work(system_percpu_wq, &hdmi->hpd_work,
 				 msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
+
+		hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
+		hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
+		ret = IRQ_HANDLED;
 	}
 
-	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
-	hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
-
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static void dw_hdmi_hpd_work(struct work_struct *work)
@@ -3343,9 +3332,8 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
 	INIT_DELAYED_WORK(&hdmi->hpd_work, dw_hdmi_hpd_work);
 	disable_delayed_work(&hdmi->hpd_work);
 
-	ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
-					dw_hdmi_irq, IRQF_SHARED,
-					dev_name(dev), hdmi);
+	ret = devm_request_irq(dev, irq, dw_hdmi_hardirq, IRQF_SHARED,
+			       dev_name(dev), hdmi);
 	if (ret)
 		goto err_res;
 
-- 
2.54.0

Claude review: drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup

[Claude Code Review Bot]

Overall Series Review

Subject: drm: bridge: dw_hdmi: Misc enable/disable, CEC and EDID cleanup
Author: Jonas Karlman <jonas@kwiboo.se>
Patches: 23
Reviewed: 2026-05-18T16:41:44.798866

---

This is a well-structured 22-patch series by Jonas Karlman that cleans up the Synopsys DesignWare HDMI bridge driver (`dw-hdmi.c`). The series is at v6, has been through multiple review rounds, and carries Reviewed-by/Tested-by tags from Neil Armstrong, Nicolas Frattaroli, and Diederik de Haas on most patches.

**Goals achieved:**
1. Simplifies enable/disable by removing the `bridge_is_on` / `dw_hdmi_update_power()` indirection and calling poweron/poweroff directly from atomic_enable/disable
2. Removes stored `previous_mode` by sourcing the adjusted_mode from crtc_state at enable time
3. Fixes a use-after-free on connector cleanup by holding a bridge reference
4. Consolidates CEC notifier handling using generic DRM CEC helpers
5. Moves EDID read from `get_modes` to `detect`/`force`, matching bridge connector behavior
6. Adds HPD debouncing via delayed_work (1100ms) to handle HPD low-voltage pulses for EDID changes
7. Removes RXSENSE handling entirely, simplifying IRQ to HPD-only
8. Merges top/bottom half IRQ handlers since delayed_work is safe from hardirq context

**Overall assessment:** The series is clean, logically ordered, and represents a significant simplification of the dw-hdmi driver. Each patch does one thing and builds on the previous. The two Fixes: patches (01, 02) are appropriate for stable backport. The final state removes ~140 net lines and eliminates several state variables (`bridge_is_on`, `disabled`, `rxsense`, `force`, `phy_mask`, `previous_mode`, `sink_is_hdmi`, `sink_has_audio`, `edid[]`, `cec_notifier_mutex`).

**One concern:** Patch 14 (bridge detect EDID update) is new in v6 and has no Reviewed-by tag, though it's a reasonable temporary measure for bridge connector parity.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Disable scrambler feature when not supported

[Claude Code Review Bot]

Patch Review

**Status:** Looks correct. Tagged with `Fixes:`.

When switching from a sink that requires scrambling (HDMI 2.0 4K@60) to one that doesn't support SCDC, the scrambler was left enabled, causing blank screens. The fix:

```c
+	} else if (hdmi->version >= 0x200a) {
+		hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
	}
```

Correctly gates on `version >= 0x200a` (matching the existing SCDC support check above). Simple and correct fix.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Only notify connected status on HPD interrupt

[Claude Code Review Bot]

Patch Review

**Status:** Looks correct. Tagged with `Fixes:`.

```c
-		if (phy_stat & HDMI_PHY_HPD)
+		if ((intr_stat & HDMI_IH_PHY_STAT0_HPD) &&
+		    (phy_stat & HDMI_PHY_HPD))
			status = connector_status_connected;
```

Previously, an RX sense change with HPD still high would trigger a false "connected" event during unplug. The added check that the HPD interrupt fired (`intr_stat & HDMI_IH_PHY_STAT0_HPD`) before reporting connected is correct.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Call poweron/poweroff from atomic enable/disable

[Claude Code Review Bot]

Patch Review

**Status:** Clean simplification.

Removes `bridge_is_on`, `dw_hdmi_update_power()`, and the power management from `dw_hdmi_setup_rx_sense()` and `dw_hdmi_connector_force()`. The commit message correctly explains that `drm_helper_hpd_irq_event()` already handles enable/disable based on connection status.

The direct calls:
```c
-	dw_hdmi_update_power(hdmi);
+	dw_hdmi_poweroff(hdmi);
```
and
```c
-	dw_hdmi_update_power(hdmi);
+	dw_hdmi_poweron(hdmi);
```
are straightforward since the old `dw_hdmi_update_power()` just checked `disabled`/`force`/`rxsense` state that is already guaranteed by the atomic enable/disable call context.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Use passed mode instead of stored previous_mode

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

Fixes the `phy.ops->init` call to use the passed `mode` parameter instead of `&hdmi->previous_mode`:
```c
-	ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data,
-				  &connector->display_info,
-				  &hdmi->previous_mode);
+	ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, display, mode);
```
Also fixes the typo "Initializateion" -> "Initialization". Extracting a `display` variable is a nice cleanup.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Fold poweron and setup functions

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

Merges the old `dw_hdmi_poweron()` wrapper into `dw_hdmi_setup()`, renaming `dw_hdmi_setup()` to `dw_hdmi_poweron()` with the connector and mode passed directly. The call site in `dw_hdmi_bridge_atomic_enable()` now retrieves the mode from crtc_state:
```c
+	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
+	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
```

No NULL checks on the return from `drm_atomic_get_new_connector_state()` or `drm_atomic_get_new_crtc_state()`, but these are guaranteed valid in `atomic_enable` since the connector is being enabled with a CRTC.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Remove previous_mode and mode_set

[Claude Code Review Bot]

Patch Review

**Status:** Correct cleanup after patches 4-5.

Removes `struct drm_display_mode previous_mode` from `struct dw_hdmi` and the now-unnecessary `dw_hdmi_bridge_mode_set()` callback. Clean.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Hold bridge ref until connector cleanup

[Claude Code Review Bot]

Patch Review

**Status:** Important fix.

Addresses a use-after-free where `dw_hdmi_bridge_destroy()` freed `struct dw_hdmi` before `drm_connector_cleanup()` ran. The fix:
```c
+	drm_bridge_get(&hdmi->bridge);
```
at connector init, and:
```c
+	drm_connector_cleanup(connector);
+	drm_bridge_put(&hdmi->bridge);
```
at connector destroy. Also properly checks the return of `drm_connector_init_with_ddc()` which was previously ignored. Good fix.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Unregister CEC notifier during connector cleanup

[Claude Code Review Bot]

Patch Review

**Status:** Correct lifetime alignment.

Moves CEC notifier unregistration from `dw_hdmi_bridge_detach()` to the new `dw_hdmi_connector_destroy()`. This aligns the CEC notifier lifetime with the connector, which is the right thing to do since the notifier references the connector.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Invalidate CEC phys addr from connector detect

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

Moves CEC phys addr invalidation from the IRQ handler to `dw_hdmi_connector_detect()`. This is safer since `detect()` runs in process context under the connector mutex.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Remove cec_notifier_mutex

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

With CEC invalidation no longer in IRQ context (patch 9), the dedicated `cec_notifier_mutex` is unnecessary. All remaining callers (`detect`, `destroy`, `connector_create`) run in contexts where mutual exclusion is already guaranteed by DRM core.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Extract dw_hdmi_connector_status_update()

[Claude Code Review Bot]

Patch Review

**Status:** Clean refactor.

Extracts EDID read + connector update + CEC phys addr setting into a helper. Note that `status` parameter is passed but not yet used to differentiate behavior -- that comes in patch 12.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Use dw_hdmi_connector_status_update()

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

The key change: EDID is now read in `detect()` and `force()` instead of `get_modes()`. This matches bridge connector behavior. The `dw_hdmi_connector_status_update()` function now handles connected vs disconnected differently:
```c
+	if (status == connector_status_disconnected) {
+		drm_edid_connector_update(connector, NULL);
+		cec_notifier_phys_addr_invalidate(hdmi->cec_notifier);
+		return;
+	}
```

The `get_modes()` is simplified to just `return drm_edid_connector_add_modes(connector)` since EDID is already cached.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Use generic CEC notifier helpers

[Claude Code Review Bot]

Patch Review

**Status:** Correct modernization.

Replaces open-coded CEC notifier handling with:
```c
+	return drmm_connector_hdmi_cec_notifier_register(connector, NULL,
+							 hdmi->dev);
```
and the matching `drm_connector_cec_phys_addr_invalidate()` / `drm_connector_cec_phys_addr_set()` helpers. Also adds `DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER` Kconfig select.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Update EDID and CEC phys addr in bridge detect()

[Claude Code Review Bot]

Patch Review

**Status:** New in v6, no Reviewed-by. Looks reasonable.

This patch adds EDID/CEC update to the *bridge* `detect()` op (as opposed to the *connector* `detect()` which was handled in patch 12). This is described as a "temporary change" until dw-hdmi is fully converted to a HDMI bridge.

```c
+	dw_hdmi_connector_status_update(hdmi, connector, status);
```

This means EDID will be read during bridge detection. When using the bridge connector, this is the right behavior.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Declare bridge CEC notifier support

[Claude Code Review Bot]

Patch Review

**Status:** Small and correct.

```c
+		hdmi->bridge.ops |= DRM_BRIDGE_OP_HDMI_CEC_NOTIFIER;
+		hdmi->bridge.hdmi_cec_dev = hdmi->dev;
```

Enables the bridge connector to use the generic CEC notifier helpers. Only done when the CEC platform device was registered.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio

[Claude Code Review Bot]

Patch Review

**Status:** Correct cleanup.

Replaces `hdmi->sink_is_hdmi` with `display->is_hdmi` and `hdmi->sink_has_audio` with `display->has_audio`, removing the stale EDID parsing code that used deprecated `drm_detect_hdmi_monitor()` and `drm_detect_monitor_audio()`. Also removes the unused `edid[512]` array and `HDMI_EDID_LEN` define. The old code even had a FIXME comment saying this should be done.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Drop call to drm_bridge_hpd_notify()

[Claude Code Review Bot]

Patch Review

**Status:** Correct, well-documented.

The commit message thoroughly explains why both `drm_helper_hpd_irq_event()` and `drm_bridge_hpd_notify()` cause duplicate hotplug events, modesets, and `hpd_notify()` calls. Only `drm_helper_hpd_irq_event()` is needed.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Use delayed_work to debounce hotplug event

[Claude Code Review Bot]

Patch Review

**Status:** Well-implemented, a few observations.

Uses `enable_delayed_work`/`disable_delayed_work` APIs to gate HPD work on attach/detach lifecycle:
```c
+#define HOTPLUG_DEBOUNCE_MS	1100
```

The 1100ms debounce matches other kernel drivers. The `hpd_work` calls `drm_helper_hpd_irq_event()` instead of `drm_bridge_hpd_notify()` to avoid the deadlock explained in the comment. The `dw_hdmi_remove()` properly disables the IRQ before canceling work:
```c
+	hdmi_writeb(hdmi, ~0, HDMI_PHY_MASK0);
+	devm_free_irq(hdmi->dev, irq, hdmi);
+	cancel_delayed_work_sync(&hdmi->hpd_work);
```

**Minor note:** `INIT_DELAYED_WORK` followed immediately by `disable_delayed_work` is fine -- it ensures the work is disabled by default until `enable_hpd`/`hpd_enable` is called.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling

[Claude Code Review Bot]

Patch Review

**Status:** Major cleanup, looks correct.

Removes all RXSENSE handling. The `dw_hdmi_phy_update_hpd()` and `dw_hdmi_setup_rx_sense()` bodies are emptied (will be removed in patches 20-21). The IRQ handler is dramatically simplified to only handle HPD:
```c
+	hdmi_modb(hdmi, hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
+		  0 : HDMI_PHY_HPD, HDMI_PHY_HPD, HDMI_PHY_POL0);
```

The initial HPD polarity is set based on current HPD status in `dw_hdmi_phy_setup_hpd()`, which avoids a spurious interrupt at probe/resume. Good change.

Removes several state variables: `force`, `disabled`, `rxsense`, `phy_mask`.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Remove the empty dw_hdmi_setup_rx_sense()

[Claude Code Review Bot]

Patch Review

**Status:** Straightforward cleanup.

Removes the empty function, its export, the header declaration, and the call in `meson_dw_hdmi.c`.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Remove the empty dw_hdmi_phy_update_hpd()

[Claude Code Review Bot]

Patch Review

**Status:** Straightforward cleanup.

Removes the empty function, its export, the header declaration, the `update_hpd` function pointer from `dw_hdmi_phy_ops`, and all assignments across imx8mp, rockchip, and sun4i drivers.

---
Generated by Claude Code Patch Reviewer

Claude review: drm: bridge: dw_hdmi: Merge top and bottom half IRQ handlers

[Claude Code Review Bot]

Patch Review

**Status:** Correct.

Since the bottom half only calls `mod_delayed_work()` (which is IRQ-safe), there's no need for a threaded IRQ handler. The merge into `dw_hdmi_hardirq()` is clean:
```c
-	ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
-					dw_hdmi_irq, IRQF_SHARED,
-					dev_name(dev), hdmi);
+	ret = devm_request_irq(dev, irq, dw_hdmi_hardirq, IRQF_SHARED,
+			       dev_name(dev), hdmi);
```

The ACK/unmute of the PHY interrupt is now done conditionally only when HPD is actually handled, which is slightly cleaner. The `intr_stat` write is moved inside the `if (intr_stat)` block to avoid unnecessary register writes.

**Series looks good for merge.** The only patch lacking review tags is 14/22 (bridge detect EDID update) and 15/22 (bridge CEC notifier support), both new in v6.

---
Generated by Claude Code Patch Reviewer